The Project Gutenberg eBook of Scientific American Supplement, No. 388, June 9, 1883
    
This ebook is for the use of anyone anywhere in the United States and
most other parts of the world at no cost and with almost no restrictions
whatsoever. You may copy it, give it away or re-use it under the terms
of the Project Gutenberg License included with this ebook or online
at www.gutenberg.org. If you are not located in the United States,
you will have to check the laws of the country where you are located
before using this eBook.

Title: Scientific American Supplement, No. 388, June 9, 1883

Author: Various

Release date: March 20, 2005 [eBook #15417]
                Most recently updated: December 14, 2020

Language: English

Credits: Produced by Juliet Sutherland and the PG Online Distributed
        Proofreading Team at www.pgdp.net.


*** START OF THE PROJECT GUTENBERG EBOOK SCIENTIFIC AMERICAN SUPPLEMENT, NO. 388, JUNE 9, 1883 ***




Produced by Juliet Sutherland and the PG Online Distributed
Proofreading Team at www.pgdp.net.




[Illustration]




SCIENTIFIC AMERICAN SUPPLEMENT NO. 388




NEW YORK, June 9, 1883

Scientific American Supplement. Vol. XV., No. 388.

Scientific American established 1845

Scientific American Supplement, $5 a year.

Scientific American and Supplement, $7 a year.

       *       *       *       *       *




TABLE OF CONTENTS.


I.  ENGINEERING.--Farcot's Improved Woolf Compound Engine.--4
       figures.

     The "Swallow," a New Vehicle.

     Boring an Oil Well.

     A Cement Reservoir.--2 figures.

     "Flying."


II.  TECHNOLOGY.--Iron and Steel.--By BARNARD SAMUELSON.
        The world's production of pig iron.--Wonderful uses and demands
        for iron and steel.--Progress of Bessemer steel.--Latest
        improvements in iron making.--Honors and rewards to inventors.
        --Growth of the Siemens-Martin process.--The future of iron and
        steel.--Relations between employers and workmen.

      Machine for Grinding Lithographic Inks and Colors.--1 figure.

      A new Evaporating apparatus.--2 figures.

      Photo Plates.--Wet and Dry.

      Gelatino Bromide Emulsion with Bromide of Zinc.

      The Removal of Ammonia from Crude Gas.

III.  MEDICINE AND HYGIENE.--The Hair, its Uses and its Care.
        The Influence of Effective Breathing in Delaying the Physical
        Changes Incident to the Decline of Life, and in the Prevention
        of Pneumonia. Consumption, and Diseases of Women.--By DAVID
        WARK. M.D.--Pneumonia.--The true first stage of Consumption. The
        development of tubercular matter in the blood.--The value of
        cod-liver oil in the prevention of consumption.--The influence
        of normal breathing on the female generative organs--Showing how
        the breathing powers may be developed.--The effects of adequate
        respiration in special cases.

      Vital Discoveries in Obstructed Air and Ventilation.

IV.   ELECTRICITY.--The Portrush Electric Railway, Ireland.--By Dr.
        EDWARD HOPKINSON.

      The Thomson-Houston Electric Lighting System.--4 figures.

      A Modification of the Vibrating Bell.--2 figures.

V.    CHEMISTRY.--Acetate of Lime.

      Reconversion of Nitroglycerine into Glycerine. By C.L. BLOXAM.

      Carbonic Acid and Bisulphide of Carbon. By JOHN TYNDALL.

VI.   AGRICULTURE AND HORTICULTURE.--Propagation of Maple Trees.

      Dioscorea Retusa.--Illustration.

      Ravages of a Rare Scolytid Beetle in the Sugar Maples of
        Northeastern New York.--Several figures.

      The Red Spider. 4 figures.

      Japanese Peppermint.

VII.  NATURAL HISTORY.--The Recent Eruption of Etna.

      The Heloderma Horridum.--Illustration.

      The Kangaroo.

VIII. ARCHITECTURE.--Design for a Villa.--Illustration.

IX.   BIOGRAPHY.--William Spottiswoode.--Portrait.

X.    MISCELLANEOUS.--Physics without Apparatus.--Illustration.

      The Travels of the Sun.




FARCOT'S IMPROVED WOOLF COMPOUND ENGINE.


In a preceding article, we have described a ventilator which is in use
at the Decazeville coal mines, and which is capable of furnishing, per
second, 20 cubic meters of air whose pressure must be able to vary
between 30 and 80 millimeters.

In order to actuate such an apparatus, it was necessary to have a
motor that was possessed of great elasticity, and that nevertheless
presented no complications incompatible with the application that was
to be made of it.

In the ventilation of mines it has been demonstrated that the
theoretic power in kilogrammes necessary to displace a certain number
of cubic meters of air, at a pressure expressed in millimeters of
water, is obtained by multiplying one number by the other. Applying
this rule to the case of 20 cubic meters under a hydrostatic pressure
of 30 millimeters, we find:

           20 × 30 = 600 kilogrammeters.

In the case of a pressure of 80 millimeters, we have:

           20 × 80 = 1,600 kilogrammeters.

If we admit a product of 50 per cent., we shall have in the two cases,
for the power actually necessary:

           600
          ---- = 1,200 kilogrammeters, or 16 H.P.
          0.05

         1,600
         ----- = 3,200 kilogrammeters, or 43 H.P.
          0.05

Such are the limits within which the power of the motor should be able
to vary.

After successively examining all the different systems of engines now
in existence, and finding none which, in a plain form, was capable of
fulfilling the conditions imposed, Mr. E.D. Farcot decided to study
out one for himself. Almost from the very beginning of his researches
in this direction, he adopted the Woolf system, which is one that
permits of great variation in the expansion, and one in which the
steam under full pressure acts only upon the small piston. There are
many types of this engine in use, all of which present marked defects.
In one of them, the large cylinder is arranged directly over the small
one so as to have but a single rod for the two pistons; and the two
cylinders have then one bottom in common, which is furnished with a
stuffing-box in which the rod moves. With this arrangement we have but
a single connecting rod and a single crank for the shaft; but, the
stuffing-box not being accessible so that it can be kept in a clean
state, there occur after a time both leakages of steam and entrances
of air.

Mr. Farcot has further simplified this last named type by suppressing
the intermediate partition, and consequently the stuffing-box. The
engine thus becomes direct acting, that is to say, the steam acts
first upon the lower surface of the small piston during its ascent,
and afterward expands in the large cylinder and exerts its pressure
upon the upper surface of the large piston during its descent.
Moreover, the expansion may be begun in the small cylinder, thanks to
the use of a slide plate distributing valve, devised by the elder
Farcot and slightly modified by the son.

As the volume comprised between the two pistons varies with the
position of the latter, annoying counter-pressures might result
therefrom had not care been taken to put the chamber in communication
with a reservoir of ten times greater capacity, and which is formed by
the interior of the frame. This brings about an almost constant
counter-pressure.

The type of motor under consideration, which we represent in the
accompanying plate, is possessed of remarkable simplicity. The number
of parts is reduced to the extremest limits; it works at high speed
without perceptible wear; it does not require those frequent repairs
that many other cheap engines do; and the expansion of the steam is
utilized without occasioning violent shocks in the parts which
transmit motion. Finally, the plainness of the whole apparatus is
perfectly in accordance with the uses for which it was devised.

[Illustration: FARCOT'S IMPROVED WOOLF COMPOUND ENGINE.]

_Details of Construction._--Figs. 1 and 2 represent the motor in
vertical section made in the direction of two planes at right angles.
Figs. 3 and 4 are horizontal sections made respectively in the
direction of the lines 1-2 and 3-4.

The frame, which is of cast iron and entirely hollow, consists of two
uprights, B, connected at their upper part by a sort of cap, B¹, which
is cast in a piece with the two cylinders, C and _c_. The whole rests
upon a base, B², which is itself bolted to the masonry foundation.

Each of the uprights is provided internally with projecting pieces for
receiving the guides between which slides the cross-head, _g_, of the
piston rod. The slides terminate in two lubricating cups designed for
oiling the surfaces submitted to friction.

The cross-head carries two bearings, _g¹_, to which is jointed the
forked extremity, D, of the connecting rod, whose opposite extremity
receives a strap that embraces the cranked end of the driving shaft,
A. It will be remarked that the crank, A¹, and the bearings, _g¹_,
are very long. The end the inventor had in view in constructing them
thus was to diminish friction.

To the shaft, A, are keyed the coupling disks, Q, which are cast solid
at a portion of their circumference situated at 180° with respect to
the parts, A², of the cranked shaft, the object of this being to
balance the latter as well as a portion of the connecting rod, D.

The shaft, A, also receives the eccentric, E, of the slide valve, the
rod, _e_, of which is jointed to the slide valve rod through the
intermedium of a cross-head, _e¹_, analogous to that of the pistons,
and which, like the latter, runs on guides held by the support, b.

The two pistons, _p_ and P, are mounted very simply on the rod, T, as
shown in Fig. 1, and slide in cylinders, _c_ and C, whose diameters
are respectively equal to 270 and 470 millimeters.

The slide valve box, F, is bolted to the cap-piece, B¹, as seen in
Fig. 4. As for the slide valve, _t_, its arrangement may be
distinguished in section in Fig. 2. Its eccentric is keyed at 170° so
as to admit steam into the small cylinder during the entire travel,
which latter is 470 mm.

To permit of the expansion beginning in the small cylinder, Mr. Farcot
has added a sliding plate, _t¹_, which abuts at every stroke against
the stops, _s_. These latter are affixed to the rod, S, whose lower
extremity is threaded, and which may be moved vertically, as slightly
as may be desired, through the medium of the pinions, S¹, when the
hand-wheel, V, is revolved. A datum point, _v_, and a graduated
socket, _v¹_, allow the position of the stops, _s_, and consequently
the degree of expansion, to be known.

Steam is introduced into the small cylinder through the conduit, _i_,
and its passage into the large one is effected through the conduit,
_f_. The escape into the interior of the frame is effected, after
expansion, through the horizontal conduit, _h_. The pipe, H, leads
this exhaust steam to the open air.

The pipe, I, leads steam into the jacket, C¹, of the large cylinder,
this latter being provided in addition with a casing of wood, C², so
as to completely prevent chilling.

The regulator, R, is after the Büss pattern, and is set in motion by a
belt which runs over the pulleys, _a_ and _a¹_. It is mounted upon a
distributing box, R¹, to which steam is led from the boiler by the
pipe, _r¹_. After traversing this box, the steam enters the slide
valve box through the pipe, _r²_, its admission thereto being
regulated by the hand-wheel, R², which likewise serves for stopping
the engine.

The cocks, _x_, are fixed at the base of the uprights, B, for drawing
from the frame the condensed water that has accumulated therein.

The lubricating apparatus, V, which communicates, through the tube,
_u_, with the steam port, _r¹_, permits oil to be sent to the large
and small cylinders through the tubes, _u¹_ and _u²_.

Mr. Farcot has recently adapted this type of motor to the direct
running of electric machines that are required to make 400 revolutions
per minute.--_Publication Industrielle._

       *       *       *       *       *




IRON AND STEEL.


At the recent meeting of the Iron and Steel Institute, London, the
president-elect (Mr. Bernard Samuelson, M.P.), delivered the following
inaugural address:


THE WORLD'S PRODUCTION OF PIG IRON.

He showed that the world's production of pig iron has increased in
round numbers from 10,500,000 tons in 1869 to 20,500,000 tons in 1882.
The blast furnaces of 1869 produced on the average a little over 180
tons per week, with a temperature of blast scarcely exceeding 800°
Fahr. The consumption of coke per ton of iron varied from 25 to 30
cwt. To-day our blast furnaces produce on the average upward of 300
tons per week.

The Consett Company have reached a production of 3,400 tons in four
weeks, or 850 tons per week, and of 134 tons in one day from a single
furnace.

From the United States we have authentic accounts of an average
production of 1,120 tons per furnace per week having been attained,
and that even this great output has lately been considerably exceeded
there. Both as to consumption of fuel and wear and tear, per ton of
iron produced, these enormous outputs are attended with economy.


HEAT OF THE BLAST.

In the case of the Consett furnace they were obtained although the
heat of the blast was under 1,100° Fahr., while heats of 1,500° to
1,600° are not uncommon at the present day in brick stoves, thanks to
the application of the regenerating principle of ex-president Sir W.
Siemens.

But an economy which promises to be of great importance is now sought
in the recovery and useful application of those constituents of coal
which, in the coking process, have hitherto been lost; or, as an
alternative, in a similar recovery in those cases in which the coal is
charged in a raw state into the blast furnace, as is the practice in
Scotland and elsewhere. This recovery of the hydrocarbons and the
nitrogen contained in the coal, and their collection as tar and
ammoniacal liquors, and subsequent conversion into sulphate of ammonia
as to the latter, and into the various light and heavy paraffin oils
and the residual pitch as to the former, have now been carried on for
a considerable time at two of the Gartsherrie furnaces; and they are
already engaged in applying the necessary apparatus to eight more
furnaces. In the coke oven the recovery of these by-products--if that
name can be properly applied to substances which yield the most
brilliant colors, the purest illuminants, and the flesh-forming
constituents supplied by the vegetable world--would appear at first
sight to be simpler; but it has presented its own peculiar
difficulties; the chief of which was, or was believed to be, a
deterioration in the quality of what has hitherto been the principal,
but what may, perhaps, come to be regarded hereafter as the residual
product, namely, the coke. But the more recent experience of Messrs.
Pease, at Crook, appears not to justify this opinion. You will see on
our table specimens of the coke produced in the Carves-Simon oven,
yielding 75 to 77 per cent. of coke from the Pease's West coal, which
they have now had at work for several months. Twenty-five of these
ovens are at work, and the average yield of ammoniacal liquor per ton
of coal has been 30 gallons of a strength of 7° Twaddell, valued at
1d. per gallon at the ovens; the quantity of tar per ton has been 7
gallons, valued at 3d. per gallon. These products would therefore
realize 4s. 3d. per ton of coal. Of course the profit on the ton of
coke is considerably more, and to this has to be added the value of
the additional weight of coke, which in the ordinary beehive ovens
from coal of the same quality is only 60 per cent. or in beehive ovens
having bottom flues about 66 per cent., while in the Carves ovens it
is, as I have said, upward of 75 per cent. Against these figures there
is a charge of 1s. 4d. per ton of coke for additional labor, including
all the labor in collecting the by-products; the interest on the first
cost of the plant, which is considerable, and probably some outlay for
repairs in excess of that in the case of ordinary ovens, has also to
be charged. Mr. Jameson takes credit for the combustible gas, which is
used up in the Carves ovens, but which remains over in his process,
and is available, though not nearly all consumed, in raising steam for
the various purposes of a colliery, including, no doubt, before long,
the generation of electricity for its illumination. It is right to
state that prior to 1879 Mr. Henry Aitken had applied bottom flues for
taking off the oil and ammoniacal water to beehive ovens at the Almond
Ironworks, near Falkirk. He states that the largest quantity of oil
obtained was eleven gallons, the specific gravity varying from 0.925
to 1.000, and that the water contained a quantity of ammonia fully
equal to 5½ lb. of sulphate of ammonia to the ton of coal coked. The
residual permanent or non-condensed gases were allowed to issue from
the end of the condenser pipe, and were burnt for light in the
engine-houses, but it was intended to force them into the oven again
above the level of the coke. Owing to the works being closed, nothing
has been done with these ovens for some years. I may mention, by the
way, that it is proposed to apply the principle of Mr. Jameson's
process to the recovery of oil and ammonia from the smouldering waste
heaps at the pit-bank, by the introduction into these of conduits
resembling those which he applies to the bottom of the beehive oven.
There is every reason to expect that one or more of these various
methods of utilizing valuable products which are at present lost will
be carried to perfection, and will tend to cheapen the cost at which
iron can be produced, and still further to increase its consumption
for all the multifarious purposes to which it is applied.


WONDERFUL USES AND DEMAND FOR IRON AND STEEL.

But the world's annual production of 20,000,000 tons of pig iron is
itself sufficiently startling, and without attempting to present to
you the statistics of all its various uses--for which, in fact, we do
not possess the necessary materials--the increased consumption of more
than 9,000,000 tons since 1869 becomes conceivable when we consider
how some of the great works in which it is employed have been
extending during that or even a shorter interval. And of these I need
only speak of the world's railways, of which there were in 1872
155,000 miles, and in 1882 not less than 260,000, but probably more
nearly 265,000 miles. In the United States alone about 60,000 miles
of railway have been built since 1869--the year, I may remind you in
passing, in which the Atlantic and Pacific States of the Union were
first united by a railway; while in our Indian Empire the
communication between Calcutta and Bombay was not completed till the
following year.

The substitution of iron and steel for wood in the construction of
ships, and the enormous increase in the tonnage of the world, in spite
of the economy arising from the employment of steamers in place of
sailing ships, is perhaps the element of increased consumption next in
importance to that of railways. I do not think that the materials are
available for estimating with any accuracy the amount of this
increase, but I believe I am rather understating it if I take the
consumption of iron and steel used last year throughout the world in
shipbuilding as having required considerably more than 1,000,000 tons
of pig iron for its production, and that this is not far short of four
times the quantity used for the same purpose before 1870. And so all
the other great works in which iron and steel are employed have
increased throughout the world. It would be tedious to indicate them
all.

Among those which rank next in importance to the preceding, I will
only name the works for the distribution of water and gas, which in
this country and in the United States have been extended in a ratio
far greater than that of the increase of the population, and which,
since the conclusion of the Franco-German war, and the consolidation
of the German and Italian States, are now to be found in almost every
European town of even secondary importance; and bridges and piers, in
the construction of which iron has almost entirely superseded every
other material.

It is difficult to imagine what would have been the state of the iron
industry in this country if we had been called upon to supply our full
proportion of the enormously increased demand for iron. To meet that
proportion, the British production of pig iron should have been close
on 11,000,000 tons in 1882, a drain on our mineral resources which
cannot be replaced, and which, especially if continued in the same
ratio, would have been anything but desirable. Fortunately, as I am
disposed to think, other countries have contributed more than a
proportionate amount to the increase in the world's demand; and,
paradoxical as it may appear, it is possible that, to this country at
least, the encouragement given by protective duties to the production
of iron abroad may have been a blessing in disguise.


PROGRESS OF BESSEMER STEEL.

To speak of the enormous increase in the production of steel by the
introduction of the Bessemer process has become a commonplace on
occasions like the present, and yet I doubt whether its real
dimensions are generally known or remembered. In 1869 the manufacture
of Bessemer steel had already acquired what was then looked upon as a
considerable development in all the principal centers of metallurgical
industry, except the United States, but including our own country,
Germany, France, and Austria, and the world's production in that year
was 400,000 tons. Last year it was over 5,000,000 tons, and it has
doubled in every steel-producing country during the last four years,
except in France, where, during this latter period, the increase has
not been much more than one-fourth. What is almost as remarkable as
the enormous increase in the production of Bessemer steel is the great
diminution in its cost. In the years preceding 1875, the price of
rails manufactured from Bessemer ingots fluctuated between £10 and £18
per ton, and I remember Lord George Hamilton when he was
Under-Secretary for India of Lord Beaconsfield's administration in
1875 or 1876, congratulating himself on his good fortune in having
been able to secure a quantity of steel rails for the Indian
government at £13 per ton. Within the last three years we have seen
them sold under £4 10s. in this country, and £5 10s. in Germany and
Belgium.


LATEST IMPROVEMENTS IN IRON MAKING.

This great reduction is the cumulative result of a number of
concurrent improvements, partly in the conversion of the iron, and
partly in the subsequent treatment of the ingot steel. In most of the
great steelworks the iron is no longer remelted, but is transferred
direct from the blast furnace to the converter, a practice which
originated at Terre-Noire, and was long considered in this country to
be incompatible with uniformity in the quality of the steel produced.
The turn-out of the converter plant has been gradually increased in
this country to more than four times that of fourteen years ago, while
the practice of the United States is stated by a recent visitor to
have reached such an astounding figure that I am afraid to quote it
without confirmation; but the greatest economy arises no doubt in the
labor and fuel employed in the mill.

Cogging has taken the place of hammering. Even wash-heating will be,
if it is not already, generally dispensed with by the soaking process
of our colleague, Mr. Gjers, which permits of the ingot, as it leaves
the pit, being directly converted into a rail.


STEEL RAILS 150 FEET LONG.

An extract from a letter addressed to me by our colleague, Mr. E.W.
Richards, will describe better than any words of mine the perfection
at which steel rail mills have arrived. He says, "Our cogging rolls
are 48 in. diameter, and the roughing and finishing rolls are 30 in.
diameter. We roll rails 150 feet long as easily as they used to roll
21 feet. Our ingots are 15½ inches square, and weigh from 25 to 30
cwts. according to the weight of rail we have to roll. These heavy
ingots are all handled by machinery. We convey them by small
locomotives from the Bessemer shop to the heating furnaces, and by the
same means from the heating furnaces to the cogging rolls.

So quickly are these ingots now handled that we have given up second
heating altogether, so that after one heat the ingot is cogged from
15½ inches square down to 8 inches square, then at once passed on to
the roughing and finishing rolls, and finished in lengths, as I have
said before, of 150 ft., then cut at the hot saws to the lengths given
in the specifications, and varying from 38 ft. to about 21 ft. The 38
ft. lengths are used by the Italian 'Meridionali' Railway Company, and
found to give very satisfactory results." I need scarcely say that in
a mill like this, the expenditure of fuel and labor and the loss by
waste caused by crop ends are reduced to a minimum.


BASIC STEEL.

The enormous production of steel has required the importation of large
quantities of iron ore of pure quality from Spain, Algeria, and
elsewhere, into this country, France, Belgium, Germany, and the United
States; and these supplies have contributed greatly to the reduction
in the price of steel to which I have referred, and what is, perhaps,
of equal importance, they have prevented the great fluctuations of
price which formerly prevailed. In 1869 this trade was in its infancy,
and almost confined to the importation of the Algerian ores of Mokta
el Hadid into France, while in 1882 Bilbao alone exported 3,700,000
tons of hematite ores to various countries to which the exports from
the south of Spain, Algeria, Elba, Greece, and other countries have to
be added. Great Britain alone imported 3,000,000 tons of high class,
including manganiferous iron ores last year.

It is questionable whether the mines of pure iron existing in Europe
would long bear a drain so great and still increasing; but happily the
question no longer presses for an answer, because the problem of
obtaining first-class steel from inferior ores has been solved by the
genius of our colleagues, Mr. Snelus and Messrs. Thomas and Gilchrist,
and by the practical skill and indomitable resolution of Mr. Windsor
Richards. It is no part of the duty of the Institute to assign to each
of these gentlemen his precise share in the development of the basic
process. Whatever those shares may be, I feel sure you will agree with
your council as to the propriety of their having awarded a Bessemer
medal to two of these gentlemen--Messrs. Snelus and Thomas--to Mr.
Snelus as the first who made pure steel from impure iron in a Bessemer
converter lined with basic materials; to Mr. Thomas, who solved the
same problem independently, and so clearly demonstrated its
practicability to Mr. Richards by the trials at Blaenavon, as to have
led that gentleman to devote all his energies and the great resources
of the Eston Works to the task of making it what it now is, a great
commercial success. All difficulties connected with the lining of the
converter and in insuring a durability of the bottom, nearly, if not
quite, equal to that in the acid process, appear now to have been
successfully surmounted, and I am informed by Mr. Gilchrist that the
present production of basic steel in this country and on the Continent
is already at the rate of considerably more than 500,000 tons per
annum, and that works are now in course of construction which will
increase this quantity to more than a million tons.

Our members will have the opportunity of seeing the process at work
during their visit to Middlesbrough, at the Eston Works of Messrs.
Bolckow, Vaughan & Co., which are now producing 150,000 tons per annum
of steel of the highest quality from the phosphoretic Cleveland ores;
and also at the North-Eastern Steel Company's Works. I believe it is
the intention of the latter company to make a pure, soft steel
suitable for plates, for which, according to the testimony of Mons.
Delafond, of Creuzot, and others, the basic steel is peculiarly
suitable on account of its remarkable regularity. I shall have the
pleasure of presenting to Mr. Snelus the medal which he has so well
deserved.


HONORS AND REWARDS TO INVENTORS.

The presentation to Mr. Thomas is deferred. His arduous labors having
affected his health, he is at present in Australia, after having, I am
happy to say, received great advantage from the voyage; and his
mother, justly proud of his merits, and appreciating fully the value
of their recognition by the award which we have made, has requested us
not to present the medal by proxy, but to await the return of her son,
in order that it may be handed to him in person. But honors, whether
conferred by the Crown, by learned bodies, or, as in this case, by the
colleagues of the recipient, though they stimulate invention, are by
themselves not always sufficient to encourage inventors to devote
their labor to the improvements of manufactures or to induce
capitalists to assist inventors in the prosecution of costly
experiments; and it is on this account that the protection of
inventions by patent is a public advantage. The members of our
profession, unlike some others, have not been eager to apply for
patents in the case of minor inventions; on the contrary, they have
freely communicated to each other the experience as to improvement in
detail which have resulted from their daily practice. It has been well
said that all the world is wiser than any one man in it, and this free
interchange of our various experiences has tended greatly to the
advancement of our trade. But new departures, like the great invention
of Sir H. Bessemer, and important improvements like the basic process,
require the protection of patents for their development.


THE PATENT LAWS.

The subject of the patent laws is, therefore, of interest to us, as it
is to other manufacturers. You are aware that the Government has
introduced a bill for amending these laws. If that bill should pass,
it will effect several important changes. It will, in the first place,
enable a poor man to obtain protection for an invention at a small
cost; secondly, it will make it more difficult than at present for a
merely pretended invention to obtain the protection and prestige of a
patent; thirdly, it will promote the amalgamation of mutually
interdependent inventions by the clause which compels patentees to
grant licenses; and, lastly, it will enable the Government to enter
into treaties with other powers for the international protection of
inventions. If you should be of opinion that these are objects
deserving of your support, I hope that you will induce your
representatives in the House of Commons to do all that is in their
power to assist the Government in passing them into law.


GROWTH OF THE SIEMENS-MARTIN PROCESS.

The growth of the open hearth or what is known as the Siemens-Martin
process of making steel, during the interval from 1869 to the present
time, has been no less remarkable than that of the Bessemer process;
for though it has not attained the enormous dimensions of the latter,
it has risen from smaller beginnings. Mr. Ramsbottom started a small
open-hearth plant at the Crewe Works of the London and North-Western
Railway, in 1868, for making railway tires, and the Landore Works were
begun by Sir W. Siemens in the same year. On the Continent there were
a few furnaces at the works of M. Emile Martin, at the Firming Works,
and at Le Creuzot. None of these works, I believe, possessed furnaces
before 1870, capable of containing more than four-ton charges,
ordinarily worked off twice in twenty-four hours. The ingots weighed
about 6 cwt., and the largest steel casting made by this process, of
which I can find any account, did not exceed 10 cwt. At the present
day, we have furnaces of a capacity of from 15 to 25 tons, and by
combining several furnaces, single ingots weighing from 120 to 125
tons have been produced at Le Creuzot. The world's production of
open-hearth steel ingots for ship and boiler plates, propeller shafts,
ordnance, wheels and axles, wire billets, armor plates, castings of
various kinds, and a multiplicity of other articles, cannot have been
less than from 800,000 to 850,000 tons in 1882.

The process itself has followed two somewhat dissimilar lines. In this
country, iron ores of a pure quality are dissolved in a bath of pig
iron, with the addition of only small quantities of scrap steel and
iron. At Le Creuzot large quantities of wrought iron are melted in
the bath. This iron is puddled in modified rotating Danks furnaces
containing a charge of a ton each. The furnaces have a mid-rib
dividing the product into two balls of 10 cwt., which are shingled
under a 10-ton hammer. The iron is of exceptional purity, containing
less than 0.01 per cent. of phosphorus and sulphur. I should add that
the two rotating furnaces produce 50 tons of billets in twenty-four
hours.


PRESENT PRODUCTION OF WROUGHT IRON.

Meanwhile, the world's production of wrought iron has not been
stationary. I cannot give very accurate figures, as the statistics of
some countries are incomplete, while in others the output of puddled
bar only, and not that of finished iron, has been ascertained. The
nearest estimate which I can arrive at is a production increased from
about 5,000,000 tons in 1869 to somewhat over 8,000,000 tons of
finished iron in 1882; an increase all the more remarkable when it is
considered that at the present time iron rails have been almost
entirely superseded by steel. It is due, no doubt, in part to the
extensive use of iron plates and angles in shipbuilding; but, apart
from these, and from bars for the manufacture of tin-plates, the
consumption has increased for the numberless purposes to which it is
applied in the world's economy.


PROGRESS OF PUDDLING.

There has been no striking improvement in the manufacture of puddled
iron, partly on account of the impression that it is doomed to be
superseded by steel. Mechanical puddling has made but little progress,
and few of the attempts to economize fuel in the puddling furnace, by
the use of gas or otherwise, have been successful. I would, however,
draw attention to the remarkable success which has attended the use of
the Bicheroux gas puddling and heating furnaces at the works of
Ougrée, near Liege. The works produce 20,000 tons of puddled bars per
annum, in fifteen double furnaces. The consumption of coal per ton of
ordinary puddled bar is under 11 cwt., and per ton of "fer à fin
grain" (puddled steel, etc.) 16 cwt. The gas is produced from slack,
and the waste heat raises as much steam as that from an ordinary
double furnace. The consumption of pig iron per ton of puddled bar was
rather less than 21½ cwts. for the year 1882; and that of "mine" for
fettling was 33 lb. The repairs are said to be considerably less than
in the ordinary furnaces, and the puddlers earn from 25 to 30 per
cent. more at the same tonnage rate. I have already mentioned the
large consumption, reckoned in tons of pig iron, of the materials for
shipbuilding.


GROSS OF IRON AND STEEL SHIP BUILDING.

It may be useful to add that the gross tonnage of iron vessels classed
during 1882 by the three societies of Lloyd's, the Liverpool Registry,
and the Bureau Veritas was 1,142,000, and of steel 143,000 tons, and
that the proportion of steel to iron vessels is increasing from year
to year. I am informed by our colleague, Mr. Pearce, of Messrs.
Elder's firm, that the largest vessel built by them in 1869 was an
iron steamer, of 3,063 tons gross, with compound engines of 3,000
horse power, working at 60 lb. pressure; speed, 14 knots.


A GIGANTIC STEAMER.

The largest vessel now on the ways is the Oregon, of 7,400 tons gross,
and 13,000 horse power; estimated speed, 18 knots. The superficial
area of the largest plates in the former was 22½ square feet; that of
the largest plate in the latter is 206 square feet. The Oregon is an
iron vessel, but some of the largest vessels now being built by Mr.
Pearce's firm are of steel.

The information which I have obtained from Messrs. Thomson, of
Glasgow, is especially emphatic as to the supersession of iron by
steel in the construction of ships. They say that large steel plates
are as cheap as iron ones, and that they have never had one bad plate
or angle in steel. This is confirmed by Mr. Denny, who says: "Whenever
our shipwrights or smiths have to turn out anything particularly
difficult in shape, and on which much 'work' has to be put, they will
get hold of a piece of steel if they can."


REMARKABLE MACHINERY AND TOOLS.

It will be readily understood that the rolls, the hammers, the
machinery for punching, drilling, planing, etc., used in the
manufacture and preparation of plates and angles for shipbuilding and
armor plates are on a scale far different at the present date from
what they were in 1869. Perhaps the most striking examples of powerful
machinery for these purposes are the great Creuzot hammer, the falling
mass of which has recently been increased to 100 tons, and the new
planing machines at the Cyclops Works, which weigh upward of 140 tons
each, for planing compound armor plates 19 in. thick and weighing 57
tons.


THE FUTURE OF IRON AND STEEL.

Some of the eminent men who have preceded me in this chair have made
their inaugural address the occasion for a forecast of the
improvements in practice and the developments in area of the great
industry in which we are engaged. Several of these forecasts have been
verified by the results; in other cases they have proved to be
mistaken; nor need this excite surprise. I believe that few would have
predicted, when the consideration of the subject was somewhat
unfortunately deferred through want of time at our Paris meeting of
1878, that the basic process would so speedily prove itself to be of
such paramount value as we now know it to possess. On the other hand,
the extinction of the old puddling process has long been the favorite
topic of one of our most practical ex-presidents, and I have shown you
by figures that the process is not only not yet dead, but that the
manufacture of wrought iron is actually flourishing side by side with
that of its younger brother, steel. How much longer this may continue
to be the case it would not be easy to foretell, but there can be
little doubt that, just as for rails steel has superseded iron as
being cheaper and vastly more durable, so it will be in regard to
plates for constructive purposes, and especially for shipbuilding. It
is now an ascertained fact that steel ships are as cheap, ton for ton
of carrying capacity, as iron ones, and it is probable that as the
demand for, and consequently the production of, steel plates
increases, steel ships will become cheaper than those built of iron;
but, what is more important, they have been proved to be safer, and no
time can long elapse before this will tell on the premiums of
insurance. Steel forgings also are superseding, and must to an
increasing extent, supersede iron; while it is probable that the
former will in their turn be replaced for many purposes by the
beautiful solid steel castings which are now being produced by the
Terre-Noire Company in France, the Steel Company of Scotland, and
other manufacturers, by the Siemens-Martin process. On this subject I
believe Mr. Parker can give us valuable information; and on a cognate
branch, namely, the production of steel castings from the Bessemer
converter, an interesting paper will be submitted to us by Mr. Allen
at our present meeting.

I may here mention incidentally, that I have of late had occasion to
make trials on a considerable scale of edge tools made from Bessemer
steel, which show that, except perhaps in the case of the finest
cutlery, there is no longer any occasion to resort to the crucible for
the production of this quality of steel.


RAILWAY DEMAND FOR IRON AND STEEL.

But it is in the further development of the world's railways that we
must mainly look in the future, as in the past, for the support of our
trade. In India the railway between Calcutta and Bombay was only
completed in 1870, and at the present time, with a population of
250,000,000, it has less than 10,000 miles of railway, while the
United States, with only 50,000,000, possesses more than 100,000
miles. In other words, the United States have fifty times as many
miles of railway in relation to the population as India. Even Russia
in Europe has 14,000 miles, or, in relation to its population, nearly
five times as great a mileage as our Indian Empire; and the existing
Indian railways are so successful pecuniarily, and give such promise
of contributing to the wealth of the Indian people--or perhaps it
would be more just to say, of rescuing them from their present state
of poverty and depression--that it should be the aim of those who are
responsible for the well-being of our great dependency to give to its
railways the utmost and most rapid development.

As to the United States themselves, I look upon their railways as a
little more than the main arteries from which an indefinitely large
circulating system will branch out. Besides these countries I need
only allude to the Dominion of Canada, whose vast territory bids fair
to rival that of the United States in agricultural importance, to our
Australian colonies, to Brazil, and other countries in which railways
are still comparatively in their infancy, to show that, quite apart
from the renewal of existing lines, the world's manufacture of rails
has an enormous future before it.


RELATIONS BETWEEN EMPLOYERS AND WORKMEN.

I look on the excellent feeling which happily prevails between the
employers and the workmen in our great industry as another of the most
important elements of its future prosperity. It confers honor on all
concerned that by our Boards of Conciliation and Arbitration, ruinous
strikes, and even momentary suspensions of labor, are avoided; and
still more that masters like our esteemed Treasurer, Mr. David Dale,
should deserve, and that large bodies of workmen should have the
manliness and discernment to bestow on him, the confidence implied in
choosing him so frequently as an arbitrator. I believe that similar
friendly relations exist in some, at any rate, of the other great
centers of the iron and steel industries, and that although our
methods may not be adapted to the habits of all, there is no country
in which some way does not exist, or may not be found, to avoid those
contests which were so fatal to our prosperity in former days. Lastly
I regard as one of the most hopeful signs of the future the increased
estimate of the value of science entertained by our practical men. In
this respect we may claim with pride that the Iron and Steel Institute
has been the pioneer, at any rate, so far as this country is
concerned. But the conviction that the elements of science should be
placed within the reach of those who occupy a humbler position in the
industrial hierarchy than we do who are assembled here is rapidly
spreading among us. The iron manufacturers of Westphalia have been the
first to found an institution in which the intelligent and ambitious
ironworker can qualify himself by study for a higher position, and I
hope when this Institute visits Middlesbrough in the autumn, some
progress will have been made in that locality toward the establishment
of a similar school. Other districts will doubtless follow, and the
result will be, to quote the words of Sir W. Siemens on a late
occasion, that "by the dissemination of science a higher spirit will
take possession of our artisans; that they will work with the object
of obtaining higher results, instead of only discussing questions of
wages." It is on the mutual co-operation in this spirit of all the
workers of every grade in our great craft that we may build the
hope--nay, that we may even cherish the certain expectation--of
placing it on even a higher eminence than that which it has already
attained.

       *       *       *       *       *




THE "SWALLOW," A NEW VEHICLE.


The graceful vehicle shown in the accompanying cut is much used in
Poland and Russia, and we believe that it has already made its
appearance at Paris. The builder is Mr. Henri Barycki, of Warsaw, who
has very skillfully utilized a few very curious mechanical principles
in it.

[Illustration: THE SWALLOW.]

The driver's seat is fixed in the interior of a wide ring to which are
fastened the shafts. This ring revolves, by the aid of three pulleys
or small wheels, within the large ring resting on the ground. It will
be seen that when the horse is drawing the vehicle, the friction of
this large wheel against the ground being greater than that of the
concentric one within it, the latter will revolve until the center of
gravity of the whole is situated anew in a line vertical to the point
at which it bears on the ground. The result of such an arrangement is
that the driver rolls on the large wheel just as he would do on the
surface of an endless rail. As may be conceived, the tractive stress
is, as a consequence, considerably diminished.

There are two side wheels which are connected by a flexible axle to
the seat of the carriage, but these have no other purpose than that of
preventing the affair from turning to one side or the other.

The "swallow," for so it is named, is made entirely of steel and
wrought iron. It is very easily kept clean; the horse can be harnessed
to it in three minutes; and, aside from its uses for pleasure, it is
capable of being utilized in numerous ways.--_La Nature_.

[Our excellent contemporary, _La Nature_, is mistaken in its account
of the above vehicle. It is an American invention and was first
published, with engraving, in the SCIENTIFIC AMERICAN, December 16,
1882.]

       *       *       *       *       *




BORING AN OIL WELL.

HOW THE HOLE WAS MADE AND THE OIL BROUGHT UP.


A letter from Bradford, Pa., says: The machinery used in boring one of
these deep oil wells, while simple enough in itself, requires nice
adjustment and skill in operating. First comes the derrick, sixty feet
high, crowned by a massive pulley.

The derrick is a most essential part of the mechanism, and its shape
and height are needed in handling the long rods, piping, casting, and
other fittings which have to be inserted perpendicularly. The borer or
drill used is not much different from the ordinary hand arm of the
stone cutters, and the blade is exactly the same, but is of massive
size, three or four inches across, about four feet long, and weighing
100 or 200 pounds. A long solid rod, some thirty feet long, three
inches in diameter, and called the "stem," is screwed on the drill.
This stem weighs almost a ton, and its weight is the hammer relied on
for driving the drill through dirt and rock. Next come the "jars," two
long loose links of hardened iron playing along each other about a
foot.

The object of the jars is to raise the drill with a shock, so as to
detach it when so tightly fixed that a steady pull would break the
machinery. The upper part of the two jars is solidly welded to another
long rod called the sinker bar, to the upper end of which, in turn, is
attached the rope leading up to the derrick pulley, and thence to a
stationary steam engine. In boring, the stem and drill are raised a
foot or two, dropped, then raised with a shock by the jars, and the
operation repeated.

If I may hazard a further illustration of the internal boring
machinery of the well, let the reader link loosely together the thumbs
and forefingers of his two hands, then bring his forearms into a
straight line. Conceiving this line to be a perpendicular one, the
point of one elbow would represent the drill blade, the adjacent
forearm and hand the stem, the linked finger the jars, and the other
hand and forearm the sinker bar, with the derrick cord attached at a
point represented by the second elbow. By remembering the immense and
concentrated weight of the upright drill and stem, the tremendous
force of even a short fall may be conceived. The drill will bore many
feet in a single day through solid rock, and a few hours sometimes
suffices to force it fifty feet through dirt or gravel. When the
debris accumulates too thickly around the drill, the latter is drawn
up rapidly. The debris has previously been reduced to mud by keeping
the drill surrounded by water. A sand pump, not unlike an ordinary
syringe, is then let down, the mud sucked up, lifted, and then the
drill sent down to begin its pounding anew. Great deftness and
experience are needed to work the drill without breaking the jars or
connected machinery, and, in case of accident, there are grapples,
hooks, knives, and other devices without number, to be used in
recovering lost drills, cutting the rope, and other emergencies, the
briefest explanation of which would exceed the limits of this letter.

The exciting moment in boring a well is when a drill is penetrating
the upper covering of sand rock which overlies the oil. The force with
which the compressed gas and petroleum rushes upward almost surpasses
belief. Drill, jars, and sinker bar are sometimes shot out along with
debris, oil, and hissing gas. Sometimes this gas and oil take fire,
and last summer one of the wells thus ignited burned so fiercely that
a number of days elapsed before the flames could be extinguished. More
often the tankage provided is insufficient, and thousands of barrels
escape. Two or three years ago, at the height of the oil production of
the Bradford region, 8,000 barrels a day were thus running to waste.
But those halcyon days of Bradford have gone forever. Although
nineteen-twentieths of the wells sunk in this region "struck" oil and
flowed freely, most of them now flow sluggishly or have to be "pumped"
two or three times a week.

"Piping" and "casing," terms substantially identical, and meaning the
lining of the well with iron pipe several inches in the interior
diameter, complete the labor of boring. The well, if a good flowing
one, does all the rest of the work itself, forcing the fluid into the
local tanks, whence it is distributed into the tanks of the pipe-line
companies, and is carried from them to the refineries. The pipe lines
now reach from the oil regions to the seaboard, carrying the petroleum
over hill and valley, hundreds of miles to tide-water.

       *       *       *       *       *




A CEMENT RESERVOIR.


The annexed figures represent, on a scale of 1 to 50, a plan and
vertical section of a reservoir of beton, 11 cubic meters in capacity,
designed for the storage of drinking water and for collecting the
overflow of a canal. The volume of beton employed in its construction
was 0.9 cubic meter per cubic meter of water to be stored. The inner
walls were covered with a layer of cement to insure of tightness.

[Illustration: A CEMENT RESERVOIR.]

T is the inlet pipe, with a diameter of 0.08 m.

T' is the distributing pipe, and T" is the waste pipe.--_Annales des
Travaux Publics_.

       *       *       *       *       *




MACHINE FOR GRINDING LITHOGRAPHIC INKS AND COLORS.


The grinding of the inks and colors that are employed in lithographing
is a long and delicate operation, which it has scarcely been possible
up to the present time to perform satisfactorily otherwise than by
hand, because of the perfect mixture that it is necessary to obtain in
the materials employed.

Per contra, this manual work, while it has the advantage of giving a
very homogeneous product, offers the inconvenience of taking a long
time and being costly. The Alauzet machine, shown in the accompanying
cut, is designed to perform this work mechanically.

[Illustration: ALAUZET'S MACHINE FOR GRINDING LITHOGRAPHIC INKS.]

The apparatus consists of a flat, cast iron, rectangular frame,
resting upon a wooden base which forms a closet. In a longitudinal
direction there is mounted on the machine a rectangular guide, along
which travel two iron slides in the shape of a reversed U, which make
part of two smaller carriers that are loaded with weights, and to
which are fixed cast-steel mullers.

At the center of the frame there is fixed a support which carries a
train of gear wheels which is set in motion by a pulley and belt.
These wheels serve to communicate a backward and forward motion,
longitudinally, to the mullers through the intermedium of a winch, and
a backward and forward motion transversely to two granite tables on
which is placed the ink or color to be ground. This last-named motion
is effected by means of a bevel pinion which is keyed to the same axle
as the large gear wheel, and which actuates a heart wheel--this latter
being adjusted in a horizontal frame which is itself connected to the
cast iron plate into which the tables are set.

This machine, which is 2 meters in length by 1 meter in width,
requires a one-third horse power to actuate it. It weighs altogether
about 800 kilogrammes.--_Annales Industrielles._

       *       *       *       *       *




A NEW EVAPORATING APPARATUS.


At a recent meeting of the _Société Industrielle_ of Elbeuf, Mr. L.
Quidet described an apparatus that he had, with the aid of Mr. Perré,
invented for evaporating juices.

In this new apparatus a happy application is made of those pipes with
radiating disks that have for some time been advantageously employed
for heating purposes. In addition to this it is so constructed as to
give the best of results as regards evaporation, thanks to the lengthy
travel that the current of steam makes in it.

[Illustration: PERRE & QUIDET'S EVAPORATING APPARATUS.]

It may be seen from an examination of the annexed cuts, the apparatus
consists essentially of a cylindrical reservoir, in the interior of
which revolves a system formed of seven pipes, with radiating disks,
affixed to plate iron disks, EE. The reservoir is mounted upon a
cast-iron frame, and is provided at its lower part with a cock, B,
which permits of the liquid being drawn off when it has been
sufficiently concentrated. It is surmounted with a cover, which is
bolted to lateral flanges, so that the two parts as a whole constitute
a complete cylinder. This shape, however, is not essential, and the
inventors reserve the right of giving it the arrangement that may be
best adapted to the application that is to be made of it.

In the center of the apparatus there is a conduit whose diameter is
greater than that of the pipes provided with radiators, and which
serves to cross-brace the two ends, EE, which latter consist of iron
boxes cast in a piece with the hollow shaft of the rotary system.

The steam enters through the pipe, F, traverses the first evaporating
pipe, then the second, then the third, and so on, and continues to
circulate in this manner till it finally reaches the last one, which
communicates with the exit, G.

Motion is transmitted to the evaporator by a gearing, H, which is
keyed on the shaft, and is actuated by a pinion, L, connected with an
intermediate shaft which is provided with fast and loose pulleys.

The apparatus is very efficient in its action, and this is due, in the
first place, to the use of radiators, which greatly increase the
heating surface, and second, to the motion communicated to the
evaporating parts. In fact, each of the pipes, on issuing from the
liquid to be concentrated, carries upon its entire surface a pellicle
which evaporates immediately.

The arrangement devised by Messrs. Perré and Quidet realizes, then,
the best theoretic conditions for this sort of work, to wit:

    1. A large evaporating surface.
    2. A very slight thickness of liquid.
    3. A constant temperature of about from 100° to 120°, according
       to the internal pressure of the steam.

Owing to such advantages, this apparatus will find an application in
numerous industries, and will render them many services.--_Revue
Industrielle._

       *       *       *       *       *




"FLYING."


_To the Editor of the Scientific American:_

Your correspondent on this subject in the issue of April 14 cites an
array of facts from which it would seem the proper conclusions should
be inferred. I think the whole difficulty arises from a confusion of
terms, and by this I mean a want of care to explain the unknown
strictly in terms of the known; and I think underlying this error is a
misconception as to what an animal is, and what animal strength is,
only of course with reference to this particular discussion, i.e.,
in so far only as they may be considered physical organisms having no
reference to the intellectual or moral development, all of which lies
beyond the sphere of our discussion.

Purely with reference to the development of physical strength, which
alone is under consideration, any animal organism whatsoever must be
considered simply in the light of a machine.

A compound machine having two parts, first an arrangement of levers
and points of application of power, all of which is purely mechanical,
together with an arrangement of parts, designed, first, to convert
fuel or food into heat, and, secondly, to transform heat into force,
which is purely a chemical change in the first instance, and a
transformation of energy in the second. So much for the animal--man or
beast--as a machine physically considered.

What then is animal strength considered in the same light? The animal
is not creative. It can make nothing--it can only transform. Does it
create any strength or force? No. The strength it puts forth or exerts
is merely the outcome of this transformation, which it is the office
of the machine to perform.

What do we find transformed? Simply the energy, or potential,
contained in the fuel or food we put into the machine. Its exact
equivalent we find transformed to another form of energy, known as
animal strength, which is simply heat within the system available for
the working of its mechanical parts. How, then, is this energy which
exists in the shape of animal strength used and distributed? This is
the question the answer of which underlies this whole discussion as a
principle. It is distributed to the different parts of the machine in
proportion to the relative amount of physical work that nature has
made it the office of any particular part to perform.

Let us see how it is with the bird machine. In course of flight he is
called upon to remain in the air, which means that should he cease to
make an effort to do this, i.e., should he cease to expend energy in
doing it, he would fall during the first second of time after ceasing
to make the effort some sixteen feet toward the center of the earth.
But he remains in the air for hours and days at a time. What is he,
then, doing every second of that time? He is overcoming the force of
gravitation, which is incessantly pulling him down. That is, every
second he is doing an amount of work equal to his weight--say 10 lb.
multiplied by 16--say 160 lb. approximately; all this by beating the
air with his wings. Now let us institute a slight comparison--and the
work shall be performed by a man, who climbs a mountain 10,000 feet
high in 10 hours. The man weighs 150 lb.; he climbs 10,000 feet;
1,500,000 foot pounds is, then, the work done. He does it in 10 hours,
or 36,000 seconds, which gives an amount of work of only 42 foot
pounds per second performed by his muscles of locomotion.

At the end of the ten hours the man is exhausted, while the bird
delights in further flight. To what is this difference of condition
due? _It is due simply to the difference in the machine;_ but this,
you say, is not explaining the unknown in terms of the known. Let us
see, then, if we cannot do this. In the two accounts of work done as
above cited in the case of the man and the bird, an amount of energy,
i.e., heat of the system, has been expended just proportional to the
work done.

Now while the bird has expended more energy in this particular work of
locomotion than has the man, we find the bird machine has done little
else; he has consumed but little of his available heat force in
exercising his brain or the other functions of his system, or in
preserving the temperature of the body, and but little of his animal
heat, which is his strength, has been radiated into space. In short,
we find the bird machine so devised by nature that a very large
proportion of the available energy of the system can be used in
working those parts contrived for locomotion, and resist the force of
gravity, or, what is the same thing, nature has placed a greater
relative portion of the whole furnace at the disposal of these parts
than she has in man. The breast muscles of the bird are so constructed
as to burn a far greater proportional amount of the fuel from which
all energy is derived than do the muscles of the rest of the body
combined.

Let us see how it is with the man who has climbed the mountain. In
this machine we find affairs in a very different state. During his
climbing he has been doing a vast amount of other work, both internal
and external. His arms, his whole muscular system, in fact, has been
vigorously at work, all drawing upon his total available energy. His
brain has been in constant and unremitted action, as well as the other
internal organs, which require a greater proportional amount of energy
than they did in the bird. Besides this, he has been radiating his
animal heat into space in a far greater amount. All these parts must
be supplied; they cannot be neglected while the accumulated surplus is
given to the machinery for locomotion or lifting. This then is what
constitutes what I call the difference in the machine, which is purely
one of organic development depending upon the functions nature has
determined that the different organs shall perform. As for the
pterodactyl quoted in the last article, I have only to remark that
this discussion arose purely from a consideration of what was the best
type of flying apparatus nature had given man to study, and I claim
that this prehistoric bird of geology does not come within this class.
For if it is not fully established that this species had become
extinct long before the appearance of man on the globe, it is at least
certain that the man of that early day had not dreamt of flying and
was presumably content if he could find other means to evade the
pterodactyl's claw.

F.J.P., U.S. Army.

       *       *       *       *       *




THE PORTRUSH ELECTRIC RAILWAY, IRELAND.[1]

[Footnote 1: A paper recently read before the Society of Arts,
London.]

By DR. EDWARD HOPKINSON.


In the summer of 1881, Mr. W.A. Traill, late of H.M. Geological
Survey, suggested to Dr. Siemens that the line between Portrush and
Bushmills, for which Parliamentary powers had been obtained, would be
suitable in many respects for electrical working, especially as there
was abundant water power available in the neighborhood. Dr. Siemens at
once joined in the undertaking, which has been carried out under his
direction. The line extends from Portrush, the terminus of the Belfast
and Northern Counties Railway, to Bushmills in the Bush valley, a
distance of six miles. For about half a mile the line passes down the
principal street of Portrush, and has an extension along the Northern
Counties Railway to the harbor. For the rest of the distance, the
rails are laid on the sea side of the county road, and the head of the
rails being level with the ground, a footpath is formed the whole
distance, separated from the road by a curbstone. The line is single,
and has a gauge of three feet, the standard of the existing narrow
gauge lines in Ulster. The gradients are exceedingly heavy, as will be
seen from the diagram, being in parts as steep as 1 in 35. The curves
are also in many cases very sharp, having necessarily to follow the
existing road. There are five passing places, in addition to the
sidings at the termini and at the carriage depot. At the Bushmills
end, the line is laid for about 200 yards along the street, and ends
in the marketplace of the town. It is intended to connect it with an
electrical railway from Dervock, for which Parliamentary powers have
already been obtained, thus completing the connection with the narrow
gauge system from Ballymena to Larne and Cushendall. About 1,500 yards
from the end of the line, there is a waterfall on the river Bush, with
an available head of 24 feet, and an abundant supply of water at all
seasons of the year. Turbines are now being erected, and the necessary
works executed for employing the fall for working the generating
dynamo machines, and the current will be conveyed by means of an
underground cable to the end of the line. Of the application of the
water power it is unnecessary to speak further, as the works are not
yet completed. For the present, the line is worked by a small
steam-engine placed at the carriage depot at the Portrush end. The
whole of the constructive works have been designed and carried out by
Mr. Traill, assisted by Mr. E.B. Price.

The system employed may be described as that of the separate
conductor. A rail of T-iron, weighing 19 pounds to the yard, is
carried on wooden posts, boiled in pitch, and placed ten feet apart,
at a distance of 22 inches from the inside rail and 17 inches above
the ground. This rail comes close up against the fence on the side of
the road, thus forming an additional protection. The conductor is
connected by an underground cable to a single shunt-wound dynamo
machine, placed in the engine shed, and worked by a small agricultural
steam engine of about 25 indicated horse power. The current is
conveyed from the conductor by means of two springs, made of steel,
rigidly held by two steel bars placed one at each end of the car, and
projecting about six inches from the side. Since the conducting rail
is iron, while the brushes are steel, the wear of the latter is
exceedingly small. In dry weather they require the rail to be slightly
lubricated; in wet weather the water on the surface of the iron
provides all the lubrication required. The double brushes, placed at
the extremities of the car, enable it to bridge over the numerous
gaps, which necessarily interrupt the conductor to allow cart ways
into the fields and commons adjoining the shore. On the diagram the
car is shown passing one of these gaps: the front brush has broken
contact, but since the back brush is still touching the rail, the
current has not been broken. Before the back brush leaves the
conductor, the front brush will have again risen upon it, so that the
current is never interrupted. There are two or three gaps too broad to
be bridged in this way. In these cases the driver will break the
current before reaching the gap, the momentum of the car carrying it
the 10 or 12 yards it must travel without power.

The current is conveyed under the gaps by means of an insulated copper
cable carried in wrought-iron pipes, placed at a depth of 18 inches.
At the passing places, which are situated on inclines, the conductor
takes the inside, and the car ascending the hill also runs on the
inside, while the car descending the hill proceeds by gravity on the
outside lines.

From the brushes the current is taken to a commutator worked by a
lever, which switches resistance frames placed under the car, in or
out, as may be desired. The same lever alters the position of the
brushes on the commutator of the dynamo machine, reversing the
direction of rotation, in the manner shown by the electrical hoist.
The current is not, as it were, turned full on suddenly, but passes
through the resistances, which are afterward cut out in part or
altogether, according as the driver desires to run at part speed or
full speed.

From the dynamo the current is conveyed through the axle boxes to the
axles, thence to the tires of the wheels, and finally back by the
rails, which are uninsulated, to the generating machine. The conductor
is laid in lengths of about 21 feet, the lengths being connected by
fish plates and also by a double copper loop securely soldered to the
iron. It is also necessary that the rails of the permanent way should
be connected in a similar manner, as the ordinary fish plates give a
very uncertain electrical contact, and the earth for large currents is
altogether untrustworthy as a conductor, though no doubt materially
reducing the total resistance of the circuit.

The dynamo is placed in the center of the car, beneath the floor, and
through intermediate spur gear drives by a steel chain on to one axle
only. The reversing levers, and also the levers working the mechanical
brakes, are connected to both ends of the car, so that the driver can
always stand at the front and have uninterrupted view of the rails,
which is of course essential in the case of a line laid by the side of
the public road.

The cars are first and third class, some open and some covered, and
are constructed to hold twenty people, exclusive of the driver. At
present, only one is fitted with a dynamo, but four more machines are
now being constructed by Messrs. Siemens Bros., so that before the
beginning of the heavy summer traffic five cars will be ready; and
since two of these will be fitted with machines capable of drawing a
second car, there will be an available rolling stock of seven cars. It
is not intended at present to work electrically the portion of the
line in the town at Portrush, though this will probably be done
hereafter; and a portion, at least, of the mineral traffic will be
left for the two steam-tramway engines which were obtained for the
temporary working of the line pending the completion of the electrical
arrangements.

Let us now put in a form suitable for calculation the principles with
which Mr. Siemens has illustrated in a graphic form more convenient
for the purposes of explanation, and then show how these principles
have been applied in the present case.

Let L be the couple, measured in foot-pounds, which the dynamo must
exert in order to drive the car, and _w_ the necessary angular
velocity. Taking the tare of the car as 50 cwt., including the weight
of the machinery it carries, and a load of twenty people as 30 cwt.,
we have a gross weight of 4 tons. Assume that the maximum required is
that the car should carry this load at a speed of seven miles an hour,
on an incline of 1 in 40. The resistance due to gravity may be taken
as 56 lb. per ton, and the frictional resistance and that due to other
causes, say, 14 lb. per ton, giving a total resistance of 280 lb., at
a radius of 14 inches. The angular velocity of the axle corresponding
to a speed of seven miles an hour, is 84 revolutions per minute. Hence
L = 327 foot pounds, and _w_ = (2[pi] × 84) / 60.

If the dynamo be wound directly on the axle, it must be designed to
exert the couple, L, corresponding to the maximum load, when revolving
at an angular velocity, w, the difference of potential between the
terminals being the available E.M.F. of the conductor, and the current
the maximum the armature will safely stand. This will be the case in
the Charing-cross Electrical Railway. But when the dynamo is connected
by intermediate gear to the driving wheels only, the product of L and
_w_ remains constant, and the two factors may be varied. In the
present case L is diminished in the ratio of 7 to 1, and _w_
consequently increased in the same ratio. Hence the dynamo, with its
maximum load, must revolve at 588 revolutions per minute, and exert a
couple of forty-seven foot-pounds. Let E be the potential of the
conductor from which the current is drawn, measured in volts, C the
current in amperes, and E1 the E.M.F. of the dynamo. Then E1 is
proportional to the product of the angular velocity, and a certain
function of the current. For a velocity [omega], let this function be
denoted by _f_(C). If the characteristic of the dynamo can be drawn,
then _f_(C) is known.

We have then

                w
       E1 = -------- f
             [Omega]                            (1.)

If R be the resistance in circuit by Ohm's law,

          E - E1
     C = --------
             R

               w
       = E  ------- f(C)
            [Omega]
        ----------------
                R

and therefore

         [Omega](E - CR)                        (2.)
     w = -----------------
              f(C)

Let _a_ be the efficiency with which the motor transforms electrical
into mechanical energy, then--

     Power required = L w = a E1 C

                            w
                   = a C ------- f(C)
                         [Omega]

Dividing by _w_,

           a C f(C)
      L = -------- .                            (3.)
           [Omega]

It must be noted that L is here measured in electrical measure, or,
adopting the unit given by Dr. Siemens in the British Association
Address, in joules. One joule equals approximately 0.74 foot pound.
Equation 3 gives at once an analytical proof of the second principle
stated above, that for a given motor the current depends upon the
couple, and upon it alone. Equation 2 shows that with a given load the
speed depends upon E, the electromotive force of the main, and R the
resistance in circuit. It shows also the effect of putting into the
circuit the resistance frames placed beneath the car. If R be
increased, until CR is equal to E, then _w_ vanishes, and the car
remains at rest. If R be still further increased, Ohm's law applies,
and the current diminishes. Hence suitable resistances are, first, a
high resistance for diminishing the current, and consequently, the
sparking at making and breaking of of the circuit; and, secondly, one
or more low resistances for varying the speed of the car. If the form
of _f_(C) be known, as is the case with a Siemens machine, equations 2
and 3 can be completely solved for _w_ and C, giving the current and
speed in terms of L, E, and R. The expressions so obtained are not
without interest, and agree with the results of experiment.

It may be observed that an arc light presents the converse case to a
motor. The E.M.F. of the arc is approximately constant, whatever the
intensity of the current passing between the carbons; and the current
depends entirely on the resistance in circuit. Hence the instability
of an arc produced by machines of low internal resistance, unless
compensated by considerable resistance in the leads.

The following experiment shows in a striking form the principles just
considered: An Edison lamp is placed in parallel circuit with a small
dynamo machine, used as a motor. The Prony brake on the pulley of the
dynamo is quite slack, allowing it to revolve freely. Now let the lamp
and dynamo be coupled to the generator running at full speed. First,
the lamp glows, in a moment it again becomes dark, then, as the dynamo
gets up speed, glows again. If the brake be screwed up tight, the lamp
once more becomes dark. The explanation is simple. Owing to the
coefficient of self-induction of the dynamo machine being
considerable, it takes a finite time for the current to obtain an
appreciable intensity, but the lamp having no self-induction, the
current at once passes through it, and causes it to glow. Secondly,
the electrical inertia of the dynamo being overcome, it must draw a
large current to produce the kinetic energy of rotation, i.e., to
overcome its mechanical inertia; the lamp is therefore practically
short-circuited, and ceases to glow. When once the rotation has been
established, the current through the dynamo becomes very small, having
no work to do except to overcome the friction of the bearings, hence
the lamp again glows. Finally, by screwing up the brake, the current
through the dynamo is increased, and the lamp again short-circuited.

It has often been pointed out that reversal of the motor on the car
would be a most effective brake. This is certainly true; but, at the
same time, it is a brake that should not be used except in cases of
emergency. For this reason, the dynamo revolving at a high speed, the
momentum of the current is very considerable; hence, owing to the
self-induction of the machine, a sudden reversal will tend to break
down the insulation at any weak point of the machine. The action is
analogous to the spark produced by a Ruhmkorff coil. This was
illustrated at Portrush; when the car was running perhaps fifteen
miles an hour, the current was suddenly reversed. The car came to a
standstill in little more than its own length, but at the expense of
breaking down the insulation of one of the wires of the magnet coils.
The way out of the difficulty is evidently at the moment of reversal
to insert a high resistance to diminish the momentum of the current.

In determining the proper dimensions of a conductor for railway
purposes, Sir William Thomson's law should properly apply. But on a
line where the gradients and traffic are very irregular, it is
difficult to estimate the average current, and the desirability of
having the rail mechanically strong, and of such low resistance that
the potential shall not vary very materially throughout its length,
becomes more important than the economic considerations involved in
Sir William Thomson's law. At Portrush the resistance of a mile,
including the return by earth and the ground rails, is actually about
0.23 ohm. If calculated from the section of the iron, it would be 0.15
ohm, the difference being accounted for by the resistance of the
copper loops, and occasional imperfect contacts. The E.M.F. at which
the conductor is maintained is about 225 volts, which is well within
the limit of perfect safety assigned by Sir William Thomson and Dr.
Siemens. At the same time the shock received by touching the iron is
sufficient to be unpleasant, and hence is some protection against the
conductor being tampered with.

Consider a car requiring a given constant current; evidently the
maximum loss due to resistance will occur when the car is at the
middle point of the line, and will then be one-fourth of the total
resistance of the line, provided the two extremities are maintained by
the generators at the same potential. Again, by integration, the mean
resistance can be shown to be one-sixth of the resistance of the line.
Applying these figures, and assuming four cars are running, requiring
4 horse power each, the loss due to resistance does not exceed 4 per
cent. of the power developed on the cars; or if one car only be
running, the loss is less than 1 per cent. But in actual practice at
Portrush even these estimates are too high, as the generators are
placed at the bottom of the hills, and the middle portion of the line
is more or less level, hence the minimum current is required when the
resistance is at its maximum value.

The insulation of the conductor has been a matter of considerable
difficulty, chiefly on account of the moistness of the climate. An
insulation has now, however, been obtained of from 500 to 1,000 ohms
per mile, according to the state of the weather, by placing a cap of
insulite between the wooden posts and T-iron. Hence the total leakage
cannot exceed 2.5 amperes, representing a loss of three-fourths of a
horse power, or under 5 per cent, when four cars are running. But
apart from these figures, we have materials for an actual comparison
of the cost of working the line by electricity and steam. The steam
tramway engines, temporarily employed at Portrush, are made by Messrs.
Wilkinson, of Wigan, and are generally considered as satisfactory as
any of the various tramway engines. They have a pair of vertical
cylinders, 8 inches diameter and one foot stroke, and work at a boiler
pressure of 120 lb., the total weight of the engine being 7 tons. The
electrical car with which the comparison is made has a dynamo weighing
13 cwt., and the tare of the car is 52 cwt. The steam-engines are
capable of drawing a total load of about 12 tons up the hill,
excluding the weight of the engine; the dynamo over six tons,
including its own weight; hence, weight for weight, the dynamo will
draw five times as much as the steam-engine. Finally, compare the
following estimates of cost. From actual experience, the steam-engine,
taking an average over a week, costs--

                                          £  s. d.
  Driver's wages.                         1 10  0
  Cleaner's  "                            0 12  0
  Coke, 58½ cwt. at 25s. per ton.         3 13  1½
  Oil, 1 gallon at 3s. 1d.                0  3  1
  Tallow, 4 lb. at 6d.                    0  2  0
  Waste, 8 lb. at 2d.                     0  1  4
  Depreciation, 15 per cent. on £750.     2  3  3
                                        ----------
                           Total.        £8  4  9½

The distance run was 312 miles. Also, from actual experience, the
electrical car, drawing a second behind it, and hence providing for
the same number of passengers, consumed 18 lb. of coke per mile run.
Hence, calculating the cost in the same way, for a distance run of 312
miles in a week--

                                                            £ s. d.
  Wages of stoker of stationary engine.                     1  0 0
  Coke, 52 cwt. at 25s. per ton.                            2 15 0
  Oil, 1 gallon at 3s. 1d.                                  0  3 1
  Waste, 4 lb. at 2d.                                       0  0 8
  Depreciation on stationary engine, 10 per cent.      }
    on £300 11s. 6d.                                   }
  Depreciation of electrical apparatus, 15 per cent.   }    2  0 4
    on £500, £1 8s. 10d.                               }
                                                         ---------
                            Total.                         £5 19 1

A saving of over 25 per cent.

The total mileage run is very small, on account of the light traffic
early in the year. Heavier traffic will tell very much in favor of the
electric car, as the loss due to leakage will be a much smaller
proportion of the total power developed.

It will be observed that the cost of the tramway engines is very much
in excess of what is usual on other lines, but this is entirely
accounted for by the high price of coke, and the exceedingly difficult
nature of the line to work, on account of the curves and gradients.
These causes send up the cost of electrical working in the same ratio,
hence the comparison is valid as between the steam and electricity,
but it would be unsafe to compare the cost of either with
horse-traction or wire-rope traction on other lines. The same fuel was
burnt in the stationary steam-engine and in the tramway engines, and
the same rolling stock used in both cases; but, otherwise, the
comparison was made under circumstances in favor of the tramway
engine, as the stationary steam-engine is by no means economical,
consuming at least 5 lb. of coke per horse-power hour, and the
experiments were made, in the case of the electrical car, over a
length of line three miles long, which included the worst hills and
curves, and one-half of the conductor was not provided with the
insulite caps, the leakage consequently being considerably larger than
it will be eventually.

Finally, as regards the speed of the electrical car, it is capable of
running on the level at the rate of 12 miles per hour, but as the line
is technically a tramway, the Board of Trade Regulations do not allow
the speed to exceed 10 miles an hour.

Taking these data as to cost, and remembering how this will be reduced
when the water power is made available, and remembering such
considerations as the freedom from smoke and steam, the diminished
wear and tear of the permanent way, and the advantage of having each
car independent, it may be said that there is a future for electrical
railways.

We must not conclude without expressing our best thanks to Messrs.
Siemens Bros. for having kindly placed all this apparatus at our
disposal to-night, and allowing us to publish the results of
experiments made at their works.

       *       *       *       *       *




THE THOMSON-HOUSTON ELECTRIC LIGHTING SYSTEM.


The generator is known as the "Thomson spherical," on account of the
nearly spherical form of its armature, and differs radically from all
others in all essential portions, viz., its field magnets, armature,
and winding thereof, and in its commutator; both in principle and
construction, and, besides, it is provided with an automatic
regulator, an attachment not applied to other generators. The annexed
view of the complete machine will convey an idea of the general
appearance and disposition of its parts.

The revolving armature which generates the electrical current is made
internally of a hollow shell of soft iron secured to the central
portion of the shaft between the bearings, and is wound externally
with a copper conducting wire, constituting three coils or helices
surrounding the armature, which coils are, however, permanently
joined, and in reality act as a single three-branched wire.

This wire, being wound on the exterior of the armature, is fully
exposed to the powerful magnetic influence of the field poles, which
inclose the armature almost completely. The armature will thus be seen
to be thoroughly incased and protected, at the same time that all the
wire upon it is subject to a powerful action of the surrounding
magnets, resulting in an economy in the generation of current in its
coils. The form of the armature being spherical, very little power is
lost by air friction, and no injury can occur from increased speed
developing centrifugal force. The field magnets, which surround the
armature, are cast iron shells, wound outside with many convolutions
of insulated copper wire, and are joined externally by iron bars to
convey the magnetism. These outer bars serve also as a most efficient
protection to the wire and armature of the machine during
transportation or otherwise. Objects cannot fall upon or rest upon the
wire coils and injure them. The coils of wire upon the field magnets
surround not only the iron poles or shells, but are situated also so
as to surround likewise the revolving armature, and increase the
effect produced in it by direct induction and magnetism. This feature
is not used in any other generator, nor does any other make use of a
spherical armature. The shaft is mounted in babbitted bearings of
ample size, sustained by a handsome frame therefor, and is of steel,
finely turned and perfectly true. The shaft and armature together are
balanced with the utmost care, and run without buzz or rumble. The
armature wire is kept cool by an active circulation of air over its
whole surface during revolution. The commutator, or portion from which
the currents developed in the armature are carried out for use, is a
beautiful piece of mechanism. It is mounted upon the end of the shaft,
and has attached to it the wires, three only, coming from the armature
wire through the tubular shaft.

[Illustration: THE THOMSON SPHERICAL.]

The commutator is peculiar, consisting of only three segments of a
copper ring, while in the simplest of other continuous current
generators several times that number exist, and frequently 120!
segments are to be found. These three segments are made so as to be
removable in a moment for cleaning or replacement. They are mounted
upon a metal support, and are surrounded on all sides by a free air
space, and cannot, therefore, lose their insulated condition. This
feature of air insulation is peculiar to this system, and is very
important as a factor in the durability of the commutator. Besides
this, the commutator is sustained by supports carried in flanges upon
the shaft, which flanges, as an additional safeguard, are coated all
over with hard rubber, one of the finest known insulators. It may be
stated, without fear of contradiction, that no other commutator made
is so thoroughly insulated and protected. The three commutator
segments virtually constitute a single copper ring, mounted in free
air, and cut into three equal pieces by slots across its face. Four
slit copper springs, called commutator brushes or collectors, are
allowed to bear lightly upon the commutator when it revolves, and
serve to take up the current and convey it to the circuit. These
commutator brushes are carried by movable supports, and their position
is automatically regulated so as to control the strength of the
developed current--a feature not found in other systems. This feature,
as well as the fact that the commutator can be oiled to prevent wear,
saves attendance and greatly increases the durability of the wearing
surfaces, while the commutator brushes are maintained in the position
of best adjustment. The commutator and brushes, in consequence, after
weeks of running, show scarcely any wear.


THE AUTOMATIC CURRENT REGULATOR.

This consists of a peculiar magnet attached to the frame of the
generator, and the movable armature of which has connections to the
supports of the commutator brushes for controlling their position. The
regulator magnet is so formed as to give a uniform attraction upon
its armature in different positions. In Thomson's improved form this
is accomplished in a novel manner by making the pole of the magnet
paraboloidal in form, and making an opening in the movable armature to
encircle said pole.

[Illustration: THE CURRENT REGULATOR]

The armature is hung on pivots so as to be free to move only toward
and from the regulating magnet on changes in the current traversing
the latter, and being connected to the commutator brushes,
automatically adjusts their position. By this means the power of the
generator is adapted to run any number of lights within its limit of
capacity, or may be short circuited purposely or by accident without
difficulty arising therefrom; and a number of instances have occurred
where the injurious effects of a short circuit accidentally formed
have been entirely obviated by the presence of the regulator. In one
instance four generators, in series representing over forty lights'
capacity, were accidentally short circuited, and no injury or even
noticeable action took place except a quick movement of the regulators
in adapting themselves to the new conditions. Had this accident
occurred to generators unprovided with regulators, great injury or
possible destruction of the apparatus would have resulted. It is
important to a full understanding of the regulation, to state that its
action is independent of resistances introduced, that it saves power
and carbons in proportion to lights extinguished, and that it
compensates for speed variations above the minimum speed. The manner
of its action is to control the generation of current at the source in
the armature, and it does so by combining certain electrical actions
so as to obtain a differential effect, such that when small force of
current only is required it alone is furnished, and when the maximum
force is needed the same shall be forthcoming.

[Illustration: THE CONTROLLER MAGNET.]

On the larger generators we combine with the regulator magnet above
described an exceedingly sensitive controller magnet governing the
regulation, and by whose accuracy the smallest variations of current
are counteracted, and the operation of the generator rendered perfect.
The controller magnet is contained in a box placed on the wall or
other support near the generator, and consists of a delicate double
axial magnet controlling the admission of current to the regulator,
upon the generator, and its action is exceedingly simple and
effective. So perfect is the action that in a circuit of twenty-five
to thirty lights, lights may be removed or put out in rapid succession
without apparently affecting those that remain. Besides, we have been
enabled to put out even eight or ten lights together instantly, while
the remainder burn as before. The features above set forth are
peculiar to the Thomson-Houston system, and have been thoroughly
covered by patents, and cannot therefore be adopted into other
systems.


THE THOMSON ARC LAMP.

This lamp is essentially a series lamp; that is, any number of them
can be put on one circuit wire, but a single lamp, used alone, burns
equally well. It consists of a metal frame supporting at the bottom
the holder for the globe and lower carbon, which is insulated from the
frame.

The annexed figure of the plain lamp will convey an understanding of
its general appearance. The upper carbon is fed downward by the
mechanism contained in the box above, and is carried by a vertical
round rod called the carbon holding rod.

[Illustration: THE THOMSON ARC LAMP.]

In the regulating box of the lamp there exists a simple mechanism, the
result of careful study and experiment to discover the best and
simplest combination of appliances, which would obviate the necessity
for the use of clockwork or dash-pots, from which fluids might be
accidentally spilled, for obtaining a gradual feeding of the carbon as
fast as it is consumed in producing the light, and at the same time to
maintain the arc or space between the carbons in burning, of such
extent as to give a steady, noiseless light, of greatest possible
economy.

The lamp, once adjusted, does not require any readjustment, and, in
fact, is built in such a manner as to avoid the presence of adjusting
devices in it. The lamp also contains an automatic safety device for
preserving the continuity of the circuit in case of accidental injury
to the feeding mechanism or the carbons of the lamps. This is quite
important when a considerable number of lights are operated upon one
circuit wire, as a break in the circuit, due to a defective lamp,
would result in the extinguishment of all the lights. With the safety
device mentioned, such a break does not occur, but the flow of current
is preserved through the faulty lamp.

By an exceedingly simple device upon the carbon holding rod, the lamps
are extinguished when the carbons are burned out, and injury by
burning the holders completely avoided.

The system is based upon the joint inventions of Elihu Thomson and
Edwin J. Houston, for generators, regulators, and electric lamps, and
also the patents of Elihu Thomson, in generators, regulators, and
electric lamps; all of which are now operated and controlled by the
Thomson-Houston Electric Co., 131 Devonshire Street, Boston, Mass.

       *       *       *       *       *





A MODIFICATION OF THE VIBRATING BELL.


One of the causes which gives rise to induction in the telephone lines
running along the Belgian railroads is that there are so many electric
bells in the stations.

Mr. Lippens proposes as a remedy for the trouble a slight modification
of the vibrating bell of his invention so as to exclude from the line
the extra currents from the bell.

In one of the styles (Fig. 1) a spring, R, is attached at T to a fixed
metallic rod, and presses against the rod, T¹. The current enters
through the terminal, B, traverses the bobbins, passes through T,
through the spring, through T¹, and makes its exit through the other
terminal. The armature is attracted, and the point, P, fixed thereto
draws back the spring from the rod, T¹, and interrupts the current;
but, at the moment at which the point touches the spring, and before
the latter has been detached from the rod, T¹, the electro-magnet
becomes included in a short circuit, and the line current, instead of
passing through the bobbins for a very short time, passes through the
wire, T, the armature, and the rod, T¹, so that the extra current is
no longer sent into the line.

[Illustration: FIG. 1.]

In another style (Fig. 2) the current is not interrupted at all, but
enters through the terminal, B, traverses the bobbins, and goes
through C to the terminal, B.

[Illustration: Fig. 2.]

As soon as the armature is attracted, the spring, R, which is fixed to
it presses against the fixed metallic rod, T, and thus gives the
electricity a shorter travel than it would take by preference. The
current ceases, then, to pass through the bobbins, demagnetization
occurs, and the spring that holds the armature separates anew. The
current now passes for a second time into the bobbins and produces a
new action, and so on. There is no longer, then, any interruption of
the current, and the motions of the hammer are brought about by the
change in direction of the current, which alternately traverses and
leaves the bobbins.

In a communication that he has addressed to us on the subject of these
bells, Mr. Lippens adds a few details in regard to the mode of
applying the ground pile to micro-telephone stations.

Being given any two stations, he puts into the ground at the first a
copper plate, and at the second a zinc one, and connects the two by a
line wire provided with two vibrating bells and two telephone
apparatus. The earth current suffices to actuate the bells, but, in
order to effect a call, the inventor is obliged to run them
continuously and to interrupt them at the moment at which he wishes to
communicate. The correspondent is then notified through the cessation
of noise in the bells, and the two call-apparatus are thrown out of
the circuit by the play of the commutator, and are replaced by the
micro-telephone apparatus.

It is certainly impracticable to allow vibrating bells to ring
continuously in this manner. The ground pile would, at the most, be
only admissible in cases where the call, having to be made from only
one of the stations, might be effected by a closing of the
circuit.--_La Lumiere Electrique_.

       *       *       *       *       *


The advantage of lighting vessels by electricity was shown when the
steamer Carolina, of the old Bay Line between Baltimore and Norfolk,
ran into the British steamship Riversdale in a dense fog off Cedar
Point, on Chesapeake Bay. The electric lights of the Carolina were
extinguished only in the damaged part of the boat, and her officers
think that if she had been lighted in any other way, a conflagration
would have followed the collision.

       *       *       *       *       *




PHOTO PLATES--WET AND DRY.


Dr. Eder has recently published, in the _Correspondenz_, the first of
a series of articles embodying the results of his more recent work on
gelatino bromide; and we now reproduce the substance of the article in
a somewhat abstracted form.

The "sensitiveness of a wet" plate continues to be used as a rough and
ready standard of comparison; and, notwithstanding the fact that it is
physically impossible to exactly compare the sensitiveness of a wet
plate with that of a gelatino bromide film, it is convenient to refer
to wet plates as some kind of a rough standard.

Experiments have shown that a gelatine plate which gives the number 10
on the Warnerke sensitometer, may be regarded as approximately
corresponding to the average wet plate; and setting out from this
point, the following table has been constructed:

  Sensitometer           Sensitiveness, expressed in terms
    number.                       of a "Wet Plate."

     10                                  1
     11                                  1-1/3
     12                                  1-3/4
     13                                  2-1/3
     14                                  3
     15                                  4
     16                                  5
     17                                  7
     18                                  9
     19                                 12
     20                                 16
     21                                 21
     22                                 27
     23                                 36
     24                                 48
     25                                 63

The nature of the developer used has, of course, some influence on the
sensitiveness of the plates; but in the above cases it is assumed that
oxalate developer, without any addition, is used; or pyro., to which
ammonia is added at intervals of about thirty seconds, so as to
produce a slight tendency to fog; the time of development being from
three to four minutes. The numbers are supposed to be read after
fixation, the plate being held against the sky.

Schumann's statement that a gelatino bromide plate is less sensitive
when developed at 30° C. than when developed at 5°, is contested; the
more recent investigations of Dr. Eder serving to demonstrate that a
developer at a moderate high temperature acts very much more rapidly
than when the temperature is low; but when a sufficient time is
allowed for each developer to thoroughly penetrate the film, the
difference becomes less apparent. Here are examples:

      _A.--Oxalate Developer._

    Temperature of developer    4-8°  C.  16-17° C.  26-28° C.
    Time of development 1 min.    3°  W.      8° W.     13° W.
          "      "      2 min.    9½° W.     10° W.     15° W.

      _B.--Pyrogallic Developer._

    Temperature of developer    1-2° C.  26-28° C.
    Time of development ¼ min.    6° W.     10° W.
          "      "      3 min.   14° W.     15° W.

       *       *       *       *       *




INTENSIFIER FOR WET PLATES.

By MAJOR WATERHOUSE.


The collodion process is still preferred for reproducing black and
white designs, drawings, engravings, etc., where very dense negatives
are desirable. The fixed and washed plate is put in a bath of bromide
of copper (ten per cent. solution); the film whitens immediately, and
when the color is even all over, the plate is taken out and plunged
into a bath of the ordinary ferrous oxalate developer. It takes a dark
olive tint, which is very non-actinic, the shadows meanwhile remaining
very clear.--_Photo. News._

       *       *       *       *       *




GELATINO BROMIDE EMULSION WITH BROMIDE OF ZINC.


By this time of the year I have no doubt many, both amateur and
professional photographers, are either contemplating or are actually
at work making their stock of plates for the coming season, and it is
to be hoped that we shall have more favorable weather than we had last
year.

Some four or five years since I tried using bromide of zinc instead of
the ordinary salts, namely, bromide of ammonium or potassium. I only
made one batch of plates at the time, which possessed several
important features I considered an advantage, and I think well worth
while following out. I do not think it can be denied that ordinary
gelatine plates, if exposed in a weak light, fall very short of the
results obtained with wet collodion when compared side by side,
gelatine being almost useless under these conditions, and there is a
decided gain in the result in this respect if the emulsion be made
with zinc bromide.

In using bromide of zinc there is a slight difficulty to overcome, but
it _can_ be overcome, as I have succeeded in making a perfect
emulsion. It will, I have no doubt, be remembered that Mr. L. Warnerke
was the first to call attention to this salt in the days of collodion
emulsion; and I think he claimed for an emulsion prepared with it that
the image would stand more forcing without fogging to gain any amount
of intensity. This was said of a collodion emulsion, and I also find
that it is the same when used in a gelatine emulsion. I have heard a
great many say, when speaking about the intensity of gelatine plates,
that they can get any amount of intensity. I grant that in a studio
where the operator has full command over the lighting of his subject
by means of blinds, but it is not so in the field, especially when the
light is dull. I have seen thousands of negatives, and as a rule I
have found want of intensity has been the fault, and generally through
the light. Now if we can find a remedy for this, it will be a step in
advance.

What I claim for bromide of zinc is that a rapid plate can be made
with it, and any degree of intensity can be readily obtained with a
very small proportion of pyrogallic acid in the developer. The cry as
always is to use plenty of pyrogallic acid and you can get any amount
of intensity. I remember, in the early days of gelatine, as much as
six grains being recommended, and I have myself, under extraordinary
circumstances, used as much as ten grains to the ounce; but I think it
is now, to a certain extent, a thing of the past. With the plates to
which I refer, I found that I only required to use for a 7½ × 5 plate
one grain of pyrogallic acid in about three ounces of developer to get
full density without the slightest difficulty. If the ordinary
quantity were used far too much density was obtained, and the plate
ruined beyond recovery; but with so small a quantity of pyro. the
plate was not so much stained as with a larger quantity, and the
negative took far less time to develop on account of the intensity
being so readily obtained.

In making a gelatine emulsion with zinc it must be _decidedly acid_ or
it fogs. I prefer nitric acid for the purpose. I also found that some
samples of the bromide behaved in a very peculiar way. All went on
well until it came to the washing, when the bromide of silver washed
out slowly, rendering the washing water slightly milky; this continued
until the whole of the bromide of silver was discharged from the
gelatine, and the latter rendered perfectly transparent as in the
first instance. I remember a gentleman mentioning at one of the
meetings of the South London Photographic Society that he was troubled
in the same way as I was at that time. I think if a few experiments
were made in this direction with the zinc salt and worked out, it
would be a great advantage.--_Wm. Brooks, in Br. Jour. of Photo_.

       *       *       *       *       *




DESIGN FOR A VILLA.


The villa of which we give a perspective drawing is intended as a
country residence, being designed in a quiet and picturesque style of
domestic Gothic, frequently met with in old country houses. It is
proposed to face the external walls with red Suffolk bricks and
Corsham Down stone dressings, the chimneys to be finished with moulded
bricks. The attic gables, etc., would be half-timbered in oak, and the
roof covered with red Fareham tiles laid on felt. Internally, the hall
and corridors are to be laid with tiles; the wood finishing on ground
floor to be of walnut, and on first floor of pitch pine. The ground
floor contains drawing-room, 23 ft. by 16 ft., with octagonal recess
in angle (which also forms a feature in the elevation), and door
leading to conservatory. The morning-room, 16 ft. by 16 ft., also
leads into conservatory. Dining-room, 20 ft. by 16 ft., with serving
door leading from kitchen. The hall and principal staircase are
conveniently situated in the main part of the house, with doors
leading to the several rooms, and entrances to garden. The domestic
offices, though conveniently placed, are entirely cut off from the
main portion of the house by a door leading from the hall. In the
basement there is ample cellar accommodation for wine or other
purposes. The first floor contains four bed-rooms, two dressing-rooms,
bath-room, w.c., etc. The attic floor, reached by the servants'
staircase, contains two servants' bed-rooms, day and night nurseries,
and box and store rooms. The estimated cost is £3,800. The design is
by Mr. Charles C. Bradley, of 82 Wellesley Road, Croydon.--_Building
Times_.

[Illustration: SUGGESTIONS IN ARCHITECTURE--DESIGN FOR A VILLA.]

       *       *       *       *       *




WILLIAM SPOTTISWOODE.


William Spottiswoode, President of the Royal Society, was born in
London, Jan. 11, 1825. He belongs to an ancient Scottish family, many
members of which have risen to distinction in Scotland and also in the
New World.

In 1845 he took a first class in mathematics, and he afterward won the
junior (1846) and the senior (1847) university mathematical
scholarships. He returned to Oxford for a term or two, and gave a
course of lectures in Balliol College on Geometry of Three
Dimensions--a favorite subject of his. He was examiner in the
mathematical schools in 1857-58. On leaving Oxford, he immediately, we
believe, took an active part in the working management of the business
of the Queen's printers, about this time resigned to him by his
father, Andrew Spottiswoode, brother of the Laird of Spottiswoode. The
business has largely developed under his hands.

Other subjects than mathematics have occupied his attention: at an
early age he studied languages, as well Oriental as European.

[Illustration: WILLIAM SPOTTISWOODE.]

As treasurer and president, he has been continuously on the Council
of the Royal Society for a great many years, and through his
exceptional gifts as an administrator he has rendered it invaluable
services. He has rendered similar services to the British Association,
to the London Mathematical Society, and to the Royal Institution. We
have permission to make the following extract from a letter written by
a friend of many years' standing: "In the councils (of the various
societies) he has always been distinguished by his sound judgment and
his deep sympathy with their purest and highest aims. There never was
a trace of partisanship in his action, or of narrowness in his
sympathies. On the contrary, every one engaged in thoroughly
scientific work has felt that he had a warm supporter in Spottiswoode,
on whose opportune aid he might surely count. The same breadth of
sympathy and generosity of sentiment has marked also his relations to
those more entirely dependent upon him. The workmen in his large
establishment all feel that they have in him a true and trustworthy
friend. He has always identified himself with their educational and
social well-being." We give here a list of some of the offices Mr.
Spottiswoode has held, and of the honors that have been bestowed upon
him: Treasurer of the British Association from 1861 to 1874, of the
Royal Institution from 1865 to 1873, and of the Royal Society from
1871 to 1878. In 1871 he succeeded Dr. Bence Jones as Honorary
Secretary to the Royal Institution. President of Section A, 1865; of
the British Association, 1878; of the London Mathematical Society,
1870 to 1872; of the Royal Society, 1879, which office he still holds.
Correspondent of the Institut (Académie des Sciences), March 27, 1876.
He is also LL.D. of the Universities of Cambridge, Dublin, and
Edinburgh, D.C.L. of Oxford, and F.R.A.S., F.R.G.S., F.R.S.E. In
addition to these honors he has many other literary and scientific
distinctions.--_Nature_.

       *       *       *       *       *




ACETATE OF LIME.


I have made a series of experiments with regard to finding a reliable
method of estimating the acetic acid in commercial acetate of lime,
and find the following gives the best results: The sample is finely
ground and about 6 grms. weighed into a half-liter flask, dissolved in
water, and diluted to the containing mark. 100 c.c. of this solution
are distilled with 70 grms. of strong phosphoric acid nearly to
dryness, and 50 c.c. of water are added to the residue in the retort
and distilled till the distillate gives no precipitate with nitrate of
silver, titrate the distillates with standard caustic soda, evaporate
to dryness in a platinum dish, and ignite the residue before the blow
pipe, which converts the phosphate of soda (formed by a little
phosphoric acid carried over in the distillation) into the insoluble
pyrophosphate and the acetate of soda into NaHO; dissolve in water,
and titrate with standard H_{2}SO_{4}, which gives the amount of soda
combined with the acetic acid in the original sample. In a number of
samples analyzed they were found to vary hardly anything.--_C. H.
Slaytor, in Chem. News._

       *       *       *       *       *




THE REMOVAL OF AMMONIA FROM CRUDE GAS.


In connection with the many plans now brought forward to utilize the
ammonia in the gases escaping from coke ovens and blast furnaces, it
may be of interest to refer to a process brought out some years ago in
connection with illuminating gas manufacture by Messrs. Bolton &
Wanklyn, and adapted by them, we understand, to the metallurgical
branches also.

When bone ash or any other substance containing phosphate of lime is
treated with sulphuric acid, the products formed are superphosphate of
lime and hydrated sulphate of lime; this mixture is known as
superphosphate of lime, in commerce, and is the substance used in this
process. This substance is capable of absorbing carbonic acid and
ammonia from foul gas. The complete action can only take place in the
presence of a certain proportion of carbonic acid, so that the process
is not so successful with "well-scrubbed illuminating gas." The
superphosphate is converted into carbonate of lime, while the ammonia
combines with the phosphoric acid to form phosphate of ammonia; the
hydrated sulphate of lime is also acted upon, and forms carbonate of
lime and sulphate of ammonia; so that, presuming the action to be
complete, and the material to be thoroughly saturated with carbonic
acid and ammonia from the foul gas, the result is a mixture of
carbonate of lime and phosphate and sulphate of ammonia.

Under these circumstances, the mixture absorbs one equivalent of
carbonic acid for every four equivalents of ammonia; therefore, if the
superphosphate process be substituted for the ordinary washers and
scrubbers, a large proportion of the carbonic acid and also the whole
of the sulphureted hydrogen is left in the gas, and must be dealt with
in other ways.

This superphosphate process has been at work at the South Metropolitan
Gas Works, Old Kent Road, for nearly two years. In practice it is
usual to water the superphosphate before use with ammoniacal liquor,
and it is used in dry purifiers, in layers about eight inches thick.

This process has been thoroughly investigated at the Munich Gas Works,
by Drs. Bunte and Schilling, and the report made by these gentlemen
proves its practical efficiency, and therefore the question of its
advantage, as compared with washing and scrubbing, is based chiefly
upon financial considerations. It is evident that in foreign parts,
or in any place where there is a difficulty in disposing of the
ammonia, the obtaining of the same in a dry form offers several
advantages as compared with having it as a weak solution.

       *       *       *       *       *




RECONVERSION OF NITRO-GLYCERIN INTO GLYCERIN.

By C.L. BLOXAM.


The following experiments on this subject appear to possess some
interest at the present moment:

1. Nitro-glycerin was shaken with methylated alcohol, which dissolves
it readily, and the solution was mixed with an alcoholic solution of
KHS (prepared by dissolving KHO in methylated spirit, and saturating
with H_{2}S gas). Considerable rise of temperature took place, the
liquid became red, a large quantity of sulphur separated, and the
nitro-glycerin was entirely decomposed.

2. Nitro-glycerin was shaken with a strong aqueous solution of
commercial K_{2}S. The same changes were observed as in 1, but the
rise of temperature was not so great, and the liquid became opaque
very suddenly when the decomposition of the nitro-glycerin was
completed.

3. The ordinary yellow solution of ammonium sulphide used in the
laboratory had the same effect as the K_{2}S. In this case the mixture
was evaporated to dryness on the steam bath, when bubbles of gas were
evolved, due to the decomposition of the ammonium nitrite. The pasty
mass of sulphur was treated with alcohol, which extracted the
glycerin, subsequently recovered by evaporation. Another portion of
the mixture of nitro-glycerin with ammonium sulphide was treated with
excess of PbCO_{3} and a little lead acetate, filtered, and the ammonium
nitrite detected in the solution. These qualitative results would be
expressed by the equation--

       C3H5(NO)+3NH4HS = C3H5(OH)3 + 3NH4NO2 + S3,

which is similar to that for the action of potassium hydrosulphide
upon gun-cotton.

4. Flowers of sulphur and slaked lime were boiled with water, till a
bright orange solution was obtained. This was filtered, and some
nitro-glycerin powered into it. The reduction took place much more
slowly than in the other cases, and more agitation was required,
because the nitro-glycerin became coated with sulphur. In a few
minutes, the reduction appearing to be complete, the separated sulphur
was filtered off. The filtrate was clear, and the sulphur bore
hammering without the slightest indication of nitro-glycerin.

This would be the cheapest method of decomposing nitro-glycerin.
Perhaps the calcium sulphide of tank-waste, obtainable from the alkali
works, might answer the purpose.--_Chemical News._

       *       *       *       *       *




CARBONIC ACID AND BISULPHIDE OF CARBON.[1]

[Footnote 1: A paper read before the Royal Society, April 5, 1883.]

By JOHN TYNDALL, F.R.S.


Chemists are ever on the alert to notice analogies and resemblances in
the atomic structure of different bodies. They long ago indicated
points of resemblance between bisulphide of carbon and carbonic acid.
In the case of the latter we have one atom of carbon united to two of
oxygen, and in the case of the former one atom of carbon united to two
of sulphur. Attempts have been made to push the analogy still further
by the discovery of a compound of carbon and sulphur analogous to
carbonic oxide, but hitherto, I believe, without success. I have now
to note a resemblance of some interest to the physicist, and of a more
settled character than any hitherto observed.

When, by means of an electric current, a metal is volatilized and
subjected to spectrum analysis, the "reversal" of the bright band of
the incandescent vapor is commonly observed. This is known to be due
to the absorption of the rays emitted by the vapor by the partially
cooled envelope of its own substance which surrounds it. The effect is
the same in kind as the absorption by cold carbonic acid of the heat
emitted by a carbonic oxide flame. For most sources of radiation
carbonic acid is one of the most transparent of gases; for the
radiation from the hot carbonic acid produced in the carbonic oxide
flame it is the most opaque of all.

Again, for all ordinary sources of radiant heat, bisulphide of carbon,
both in the liquid and vaporous form, is one of the most diathermanous
bodies ever known. I thought it worth while to try whether a body
reputed to be analogous to carbonic acid, and so pervious to most
kinds of heat, would show any change of deportment when presented to
the radiation from hot carbonic acid. Does the analogy between the two
substances extend to the vibrating periods of their atoms? If it does,
then the bisulphide, like the carbonic acid, will abandon its usually
transparent character, and play the part of an opaque body when
presented to the radiation from the carbonic oxide flame. This proved
to be the case. Of the radiation from hydrogen, a thin layer of
bisulphide transmits 90 per cent., absorbing only 10. For the
radiation from carbonic acid, the same layer of bisulphide transmits
only 25 per cent., 75 per cent. being absorbed. For this source of
rays, indeed, the bisulphide transcends, as an absorbent, many
substances which, for all other sources, far transcend _it_.

       *       *       *       *       *




THE HAIR, ITS USE AND ITS CARE.[1]

[Footnote 1: Abstract of a paper read before the Pennsylvania State
Medical Society, at Norristown, May 10, 1883.--_N.Y. Med. Jour._]

By JOHN V. SHOEMAKER, A.M., M.D., Physician to the Philadelphia
Hospital for Skin Diseases.


The object of this paper is to briefly describe the hair and its
important functions, and to suggest the proper manner of preserving it
in a healthy state.

I know full well that much has been written upon this useful part of
the human economy, but the constant increase of bald heads and
beardless faces, notwithstanding all our modern advancement in the
application of remedies to the cure of disease, prompts me to point
out to you the many ways of retaining, without medication, the hair,
which is a defense, ornamentation, and adornment to the human body.

[Dr. Shoemaker here gave an interesting history of the growth and
development of the hair and its uses, which we are compelled to omit.
Then, proceeding, he said:] Now, the hair, which fulfills such an
important function in the adornment and health of the body, requires
both constitutional and local care to keep it in its normal, healthy
state. When I say constitutional care, I mean that the various organs
of the body that assist in nourishing and sustaining the hair-forming
apparatus should, by judicious diet, exercise, and attention to the
nervous system, be kept healthy and sound, in order that they in turn
may assist in preserving the hairs in a vigorous condition.

In the first place, that essential material, food, which is necessary
to supply the waste and repair of all animal life, should be selected,
given, or used according to good judgment and experience.

Thus, mothers should feed their infants at regular intervals according
to their age, and not permit them to constantly pull at the breast or
the bottle until the little stomach becomes gorged with food, and some
alimentary disorder supervenes, often setting up a rash and
interfering with the growth and development of the hair. It is
likewise important, in case the baby must be artificially fed, to
select good nutritious food as near as possible like the
mother's--cow's milk, properly prepared, being the only recognized
substitute. Care and discretion should likewise be taken by parents
and nurses, after the infant has developed into childhood, to give
simple, substantial, and varied food at regular periods of the day,
and not in such quantities as to overload the stomach. Children need
active nutrition to develop them into robust and healthy men and
women; and it is from neglect of these important laws of health, and
in allowing improper food, that very often bring their results in
scald head, ring-worm, and scrofula, that leave their stamp in the
poor development of the hair. With the advent of youth and the advance
of years, food should be selected and partaken of according to the
judgment and experience of its acceptable and wholesome action on the
consumer.

The meals should also be taken at regular intervals. At least four
hours should be left between them for the act of digestion and the
proper rest of the stomach.

It is, on the contrary, when the voice of nature has been stifled,
when judgment and experience have been set aside, that mischief
follows; when the stomach is teased and fretted with overloading, and
the food gulped down without being masticated, gastric and intestinal
derangement supervenes, which is one of the most prolific sources of
the early decay and fall of the hair.

The nervous system, which is one of the most important portions of the
human structure, and which controls circulation, secretion, and
nutrition, often by being impaired, plays a prominent part in the
production of baldness. Thus, it has been demonstrated by modern
investigation that the nerves of nutrition, by their defective action,
are often the cause of thinning and loss of hair. The nutritive action
of a part is known to suddenly fail, the hair-forming apparatus ceases
to act, the skin changes from a peculiar healthy hue to a white and
shining appearance, and often loses at the same time its sensibility;
the hairs drop out until very few remain, or the part becomes entirely
bald. It is the overtaxing of the physical powers, excessive brain
work, the exacting demands made by parents and teachers upon
children's mental faculties, the loss of sleep, incessant cares,
anxiety, grief, excitement, the sudden depression and exaltation of
spirits, irregular and hastily bolted meals, the lack of rest and
recreation, the abuse of tobacco, spirits, tea, coffee, and drugs of
all forms, that are fruitful sources of this defective action of the
nerves of nutrition, and consequent general thinning and loss of hair.

The hair, particularly of the head, should also receive marked local
attention. In reference to the use of coverings for it, I know of no
better rules than those which I laid down in my chapter on clothing in
"Household Practice of Medicine" (vol. i., p. 218, William Wood & Co.,
New York), in which I state that the head is the only part of the body
so protected by nature as to need no artificial covering.

The stiff hats so extensively worn by men produce more or less injury.
Premature baldness most frequently first attacks that part of the head
where pressure is made by the hat. It is, indeed, a pity that custom
has so rigidly decreed that men and women must not appear out of doors
with heads uncovered. It would be far better for the hair if to be
bare-headed were the rule, and to wear a hat the exception.

Since we can not change our social regulations in this respect, we
should endeavor to render them as harmless as possible.

The forms of hats that are least injurious are: for Winter, soft hats
of light weight, having an open structure, or pierced with numerous
holes; for Summer, light straws, also of open structure.

As regards the head-covering of women, the fashions have been for
several years favorable to proper form. The bonnet and hat have become
quite small, and cover but little of the head. This beneficial
condition, however, is in part counterbalanced by the weight of false
curls, switches, puffs, etc., by the aid of which women dress the
head. These, by interfering with evaporation of the secretions,
prevent proper regulations of the temperature of the scalp, and
likewise lead to the retention of a certain amount of excrementitious
matter, both of which are prolific sources of rapid thinning and loss
of hair in women.

False hair has likewise sometimes been the means of introducing
parasites, which give rise to obstinate affections of the scalp.

Cleanliness of the entire surface of the skin should next demand
attention, and that should be done by using water as the medium of
ablution. It is a well-known physiological law that it is necessary,
in order to enable the skin to carry on its healthful action, to have
washed off with water the constant cast of scales which become mingled
with the unctuous and saline products, together with particles of dirt
which coat over the pores, and thus interfere with the development of
the hairs. Water for ablution can be of any temperature that may be
acceptable and agreeable, according to the custom and condition of the
bather's health. Many chemical substances can be combined with water
to cleanse these effete productions from the skin. Soap is the most
efficacious of all for cleanliness, health, and the avoidance of
disease. Soap combines better with water to render these unctuous
products miscible, and readily removes them thoroughly from the skin.
The best variety of soap to use is the pure white soap, which cannot
be so easily adulterated by coloring material, or disguised by some
perfume or medicinal substance. Ablution with soap and water should be
performed once or twice a week at least, particularly to the head and
beard, in order to keep open the hair tubes so that they may take in
oxygen, give out carbon, carry on their nutrition, and maintain the
hairs in a fine, polished, and healthy condition. In using water to
the scalp and beard, care should be taken not to use soap-water too
frequently, as it often causes irritation of the glands, and leads to
the formation of scurf. It is equally important to avoid using on the
head, the daily shower-bath, which, by its sudden, rapid, and heavy
fall, excites local irritation, and, as a result, loss of hair quickly
follows. In case the health demands the shower-bath, the hair should
be protected by a bathing cap. The most acceptable time to wash the
hair, to those not accustomed to doing it with their morning bath, is
just before retiring, in order to avoid going into the open air or
getting into a draught and taking cold. After washing, the hair should
be briskly rubbed with rough towels, the Turkish towel heated being
particularly serviceable. Those who are delicate or sick, and fear
taking cold or being chilled from the wet or damp hairs, should rub
into the scalp a little bay rum, alcohol, or oil, a short time after
the parts have been well chafed with towels. The oil is particularly
serviceable at this period, as it is better absorbed, and at the same
time overcomes any dryness of the skin which often follows washing.

It might be well to add in this connection that I have frequently been
consulted, by those taking salt-water baths, as to the care of the
hair during and after the bath. If the bather is in good health, and
the hair is normal, the bather can go into the surf and remain at
least fifteen minutes, and on coming out should rub the hair
thoroughly dry with towels.

Ladies should permit it remain loose while doing so, after which it
can be advantageously dressed.

It is, however, often injurious to both men and women having some
wasting of the hair to go into the surf without properly protecting
the head; the sea water has not, as is often thought, a tonic action
on the scalp; on the contrary, it often excites irritation and general
thinning. Again, it is most decidedly injurious to the hair for
persons to remain in the surf one or two hours, the hair wet, and the
head unprotected from the rays of the sun. This latter class of
bathers, and those who hurriedly dress the hair wet, which soon
becomes mouldy and emits a disagreeable odor, are frequent sufferers
from general loss and thinning of the hair.

An agreeable and efficient adjunct after ablution, which I have
already referred to, is oil. Oil has not only a cleansing action upon
the scalp, but it also overcomes any rough or uneven state of the
hair, and gives it a soft and glossy appearance.

The oil of ergot is particularly serviceable in fulfilling these
indications, and, at the same time, by its soothing and slight
astringent action upon the glands, will arrest the formation of scurf.
In using oil, the animal and vegetable oils should always be
preferred, as mineral oils, especially the petroleum products, have a
very poor affinity for animal tissues.

Pomatum is largely used by many in place of oil, as it remains on the
surface and gives a full appearance to the hairs, thus hiding,
sometimes, the thinness of the hair.

It will do no harm or no special good if it contains pure grease, wax,
harmless perfume, and coloring matter, but it is often highly
adulterated, or, the fat in it decomposing, sets up irritation on the
part to which it is applied. I therefore always advise against its
use.

The comb and brush are also agents of the toilet by which the hair is
kept clean, vigorous, and healthy. The comb should be of flexible gum,
with large, broad, blunt, round, and coarse teeth, having plenty of
elasticity. It should be used to remove from the hairs any scurf or
dirt that may have become entangled in them, to separate the hairs and
prevent them from becoming matted and twisted together.

The fine-tooth comb, made with the teeth much closer together, can be
used in place of the regular toilet comb just named when the hair is
filled with very fine particles of scurf, dirt, or when parasites and
their eggs infest the hairs. It should, however, always be borne in
mind that combs are only for the hair, and not for the scalp or the
skin, which is too often torn and dug up by carelessly and roughly
pulling these valuable and important articles of toilet through the
skin as well as the hair.

The brush with moderately stiff whalebone bristles may be passed
gently over the hair several times during the day, to brush out the
dust and the dandruff, and to keep the hair smooth, soft, and clean;
rough and hard brushing the hair with brushes having very stiff
bristles in them, especially the metal or wire bristles, is of no
service, but often irritates the parts and causes the hair to fall
out. [Dr. Shoemaker then denounced the use of the so-called electric
brush, saying its use was injurious, as also was the effort to remove
dandruff by the aid of the comb and brush. Continuing, he remarked:]
And now the question arises, Should the hair be periodically cut? It
may be that cutting and shaving may for the time increase the action
of the growth, but it has no permanent effect either upon the
hair-bulb or the hair sac, and will not in any way add to the life of
the hair.

On the contrary, cutting and shaving will cause the hair to grow
longer for the time being, but in the end will inevitably shorten its
term of life by exhausting the nutritive action of the hair-forming
apparatus. When the hairs are frequently cut, they will usually become
coarser, often losing the beautiful gloss of the fine and delicate
hairs. The pigment will likewise change--brown, for instance, becoming
chestnut, and black changing to a dark brown. In addition, the ends of
very many will be split and ragged, presenting a brush like
appearance. If the hairs appear stunted in their growth upon portions
of the scalp or beard, or gray hairs crop up here and there, the
method of clipping off the ends of the short hairs, of plucking out
the ragged, withered, and gray hairs, will allow them to grow
stronger, longer, and thicker.

Mothers, in rearing their children, should not cut their hair at
certain periods of the year (during the superstitious time of full
moon), in order to increase its length and luxuriance as they bloom
into womanhood, and manhood. This habit of cutting the hair of
children brings evil in place of good, and is also condemned by the
distinguished worker in this department, Professor Kaposi, of Vienna,
who states that it is well known that the hair of women who possess
luxuriant locks from the time of girlhood never again attains its
original length after having once been cut.

Pincus has made the same observation by frequent experiment, and he
adds that there is a general opinion that frequent cutting of the hair
increases its length; but the effect is different from that generally
supposed. Thus, upon one occasion he states that he cut off circles of
hair an inch in diameter on the heads of healthy men, and from week to
week compared the intensity of growth of the shorn place with the rest
of the hair. The result was surprising to this close and careful
observer, as he found in some cases the numbers were equal, but
generally the growth became slower after cutting, and he has never
observed an increase in rapidity.

I might also add that I believe many beardless faces and bald heads in
middle and advancing age are often due to constant cutting and shaving
in early life. The young girls and boys seen daily upon our streets
with their closely cropped heads, and the young men with their
clean-shaven faces, are, year by year, by this fashion, having their
hair-forming apparatus overstrained.

I also must condemn the modern practice of curling and crimping, the
use of bandoline, powders, and all varieties of gum solutions, sharp
hair-pins, long-pointed metal ornaments and hair combs, the wearing of
chignons, false plaits, curls, and frizzes, as the latter are liable
to cause headaches and tend to congestion. Likewise I protest against
the use of castor-oil and the various mixtures extolled as the best
hair-tonics, restoratives, vegetable hair-dyes, or depilatories, as
they are highly injurious instead of beneficial, the majority of
hair-dyes being largely composed of lead salts. But, should your
patients wish to hide their gray hairs, probably the best hair-dye
that can be used safely is pyrogallic acid or walnut juice, the hairs
being first washed with an alkaline solution to get rid of the grease.
Nitrate of silver is also a good and safe hair-dye, but its
application should be done by one experienced in its use. The
judicious use of these hair-dyes will give the hair above the surface
of the skin a brownish-black appearance, the intensity of the color of
which depends upon the strength of the solution. But hair-dyeing for
premature grayness should be avoided, as the diseased condition may be
averted by the proper remedies. Never permit the hair to be bleached
for the purpose of obtaining the fashionable golden hue, as the
arsenical solution generally used is highly dangerous; but, if your
patients must have their hair of a golden color, insist upon their
hairdresser using the peroxide of hydrogen, which is less dangerous
than the preparation first mentioned.

Perhaps one of the most pernicious compounds used for the hair at the
present day is that which is sold in the shops as a depilatory. It is
usually a mixture of quicklime and arsenic, and is wrongly used and
recommended at this time by many physicians to remove hairy moles and
an excessive growth of hair upon ladies' faces. Its application
excites inflammation of the skin; and, while it removes the hair from
the surface for a time, it often leaves a scar, or makes the part
rough, congested, and deformed.

In the meantime, the hair will grow after a short period stronger,
coarser, and changed in color, which will even more disfigure the
person's countenance. With the present scientific knowledge of the
application of electrolysis, hairs can be removed from the face of
ladies or children, or in any improper situation, in the most harmless
manner without using such obnoxious and injurious compounds as
depilatories.

In conclusion, let me add that, if the hair becomes altered in
texture, or falls out gradually or suddenly, or changes in color, a
disease of the hair, either locally or generally, has set in, and the
hair, and perhaps the constitution, now needs, as in any other
disease, the constant care of the physician.

A general remedy for this or that hair disease that may develop will
not answer, as hair diseases, like other affections, have no one
remedy which will overcome wasting, thinning, or loss of color.
Patients reasoning upon this belief, frequently apply to me for a
remedy to restore their hair to its full vigor or give them back its
color. I always reply that I have no such remedy.

The general health, as well as the scalp and hairs, must be examined
carefully, particularly the latter, with the lens and microscope. All
changes must be watched, and the treatment varied from time to time
according to the indications.

No one remedy can, therefore, under any circumstances, suit, as the
remedy used to-day may be changed at the next or succeeding visit. No
remedy for the hair will be necessary if the foregoing advice be
followed which I have just narrated, and which is the result of some
seven years of labor and experience.

The proper consideration and putting into practice of these
suggestions will most certainly secure to the rising generation fewer
bald heads and more luxuriant hair than is possessed at the present
day.

       *       *       *       *       *

      [Concluded from SUPPLEMENT No. 387, page 6179.]




THE INFLUENCE OF EFFECTIVE BREATHING IN DELAYING THE PHYSICAL
CHANGES INCIDENT TO THE DECLINE OF LIFE, AND IN THE PREVENTION OF
PNEUMONIA, CONSUMPTION, AND DISEASES OF WOMEN.

By DAVID WARK, M.D., 9 East 12th Street, New York.


PNEUMONIA.

During the past winter inflammation of the lungs has destroyed the
lives of many persons who, although they were in most cases past the
meridian of life, yet still apparently enjoyed vigorous health, and, I
have little doubt, would still have been alive and well had the
preventive means here laid down against the occurrence of the disease
from which they perished been effectively practiced at the proper
time.

The most important anatomical change occurring during the progress of
pneumonia is the solidification of a larger or smaller part of one or
both lungs by the deposit in the terminal bronchial tubes and in the
air cells of a substance by which the spongy lungs are rendered as
solid and heavy as a piece of liver. The access of the respired air to
the solidified part being totally prevented, life is inevitably
destroyed if a sufficiently large portion of the lungs be invaded.

This deposit succeeds the first or congestive stage, and it occurs
with great rapidity; an entire lobe of the lung may be rendered
perfectly solid by the exudation from the blood of fully two pounds of
solid matter in the short space of twelve hours or even less. The
rapidity with which the lungs become solidified amply accounts for the
promptly fatal results that often attend attacks of acute pneumonia.
If recovery takes place, the foreign matter by which the lung tissue
has been solidified is perfectly absorbed and the diseased portion is
found to be quite uninjured. The only natural method by which the
blood can be freed from the presence of foreign matter is by the
oxidation--the burning--of such impure matters; the results being
carbonic acid gas that escapes by the lungs and certain materials that
are eliminated chiefly by the kidneys. But when these blood impurities
exist in the vital fluid in unusually large quantities, or if the
respiratory capacity be inadequate, the natural internal crematory
operations are a partial failure. But nature will not tolerate the
presence of such impurities in the vital fluid; if they cannot be
eliminated by natural means they must by unnatural means; therefore
such material is very frequently deposited in various parts of the
body, the point of deposit being often determined by some local
disturbance or irritation.

For instance, if a person whose blood is in fairly good condition
takes a cold that settles on his lungs, he either recovers of it
spontaneously or is readily cured by means of some cough mixture; but
if his blood be loaded with tubercular matter, the latter is extremely
liable to be deposited in his lungs; the cough that was excited in the
first place by a simple cold becomes worse and persistent, in a few
months his lungs show signs of disorganization, and he has consumption
of the acute or chronic type, as the case may be.

On the other hand, if the impure matter by which the blood is loaded
be of the kind that causes the pulmonary solidifications of pneumonia,
the latter disease is very likely to be developed if a cold on the
lungs be caught.

The liability of any individual to attacks of acute pneumonia is
therefore determined very largely by the presence or absence in his
blood of the matter already alluded to. If his blood be free from it,
no cold, however severe, is competent to originate the disease.

There can be no question but that good living and sedentary habits
have a strong tendency to befoul the blood; the former renders
effective respiration all the more necessary for the removal from the
blood of whatever nutritive matter has been taken beyond the needs of
the system, and the latter inevitably diminishes the respiratory
motions to the lowest point consistent with physical comfort. From
these conditions originates the active predisposing cause of
pneumonia, to which we have already alluded.

The disease is more fatal in the very young and in the aged; the
mortality seems to bear a direct ratio to the respiratory capacity; in
young subjects the breathing powers have not been fully developed like
the other physical capacities, while in the old the respiratory volume
has been diminished by the stiffening of the chest walls and of the
lungs by the senile changes already detailed.

There can be no question but that protection from cold and judicious
attention to the health generally, by suitable exercise and diet, has
a powerful tendency to prevent that overloaded condition of the blood
to which I believe acute pneumonia to be chiefly due; still I have no
doubt but that the most active preventive measure that can be adopted
is keeping up the respiratory capacity to the full requirements of the
system, a precaution which is specially necessary to ease-loving and
high-living gentlemen who are past the prime of life. I am of the
opinion that if such persons would cultivate their breathing powers by
the simple means here recommended, their liability to pneumonia would
be notably reduced.


THE TRUE FIRST STAGE OF CONSUMPTION.

The progress of tubercular consumption has been divided by pathologists
into three stages. The first stage being that in which a deposit of
tubercular matter occurs in the lung tissue, the second is entered on
when the tubercles soften, and the third when they have melted down,
been expectorated, and cavities have formed. But the real beginning of
this most insidious and justly dreaded disease not infrequently
antedates for a long time, often for several years, the deposit of any
tubercular matter. During all this time an expert examiner can detect
the slight but very significant changes already taking place in the
pulmonary organs. Physicians determine the condition of the lungs
chiefly through the sounds elicited by percussion of the chest walls
by the end of the middle finger, or a small rubber hammer adapted to
the purpose, and by those produced by the respired air rushing in to
and out of the bronchial tubes and air vesicles. The percussion sounds
yielded by the chest during what has been aptly called the
pre-tubercular stage do not differ from those elicited in health,
because it is only when some morbid matter exists in the lungs that
the percussion note is altered, therefore negative results only are
obtained in the real first stage by this mode of examination. But
important information can be obtained by interrogating the sounds due
to the inspired air rushing into and distending the air vesicles. When
the lungs are perfectly healthy, these are breezy and almost musical.
During the pre-tubercular stage they become drier and harsher;
qualities of evil omen that continue to increase as time passes, if
properly directed means be not adopted to correct the evil; but so far
none of the symptoms that indicate the slightest deposit of tubercle
can be detected, but the breathing capacity of such persons is never
up to the full requirements of the system. The reader is referred to
the table already given, which exhibits the decline of the breathing
capacity of persons suffering from consumption in its several stages.
When the disease has made such decided progress that tubercles are
already deposited in the lungs in sufficient quantity to give rise to
the physical signs by which their presence is proved, this carefully
compiled table shows that the diminution of the vital capacity already
amounts to one-third of that considered by Dr. Hutchinson to be
necessary to the maintenance of health.

During the pre-tubercular stage the breathing capacity rarely falls so
much as 33 per cent. below the healthy standard, but it is never up to
the normal vital volume. This fact is most significant, especially
when it occurs in an individual whose relatives have succumbed to this
disease; but it rarely attracts sufficient attention from such persons
as to induce them to have their breathing capacity measured, much less
to take effective measures to bring and keep it up to the healthy
standard. So long as there are, to them, no tangible symptoms of
approaching mischief, and they feel fairly well, they act as if they
thought "that all men were mortal but themselves." Yet it is from
among persons who have an inherited but latent tendency to tubercular
disease, and whose lung power is below par, that the great army of
consumptives who die every year is recruited. It is very difficult to
induce persons who ought to be interested in this matter to take
effective measures for their future safety when the terrible symptoms
accompanying the last stages of the disease often fail to shake the
sufferer's confident expectation of recovery; and we sometimes see
them engaged in laying plans for the future when death is imminent. I
regret deeply to be obliged to make these statements, because I am
convinced that if the suggestions laid down in this work were
generally reduced to practice by those who have reason to dread the
development of tubercular disease, many valuable lives would be saved.


THE DEVELOPMENT OF TUBERCULAR MATTER IN THE BLOOD.

During the digestive processes the starchy, saccharine, and albuminoid
elements of food are dissolved, and the fatty matters are emulsified.
A uniform milky solution is thus formed, which is rapidly absorbed
into the general circulation; some of it passes directly through the
walls of the vessels into the blood, and some is taken up by the
lacteals and reaches the vital fluid by traversing the complicated
series of tubes known as the absorbent system, and the numerous glands
connected with it. The chief function of the starchy and fatty food
elements is to keep up the physical temperature, by being submitted to
oxidation in the organism; therefore it is not necessary that they
should experience any vitalizing change, but are fitted to discharge
their duties in the vital domain by simply undergoing the solution
that fits them for absorption. But the materials intended to enter
into the composition of the body must be developed into living blood,
in order to be fitted to become part and parcel of the organs by which
power is evolved, and through the use of which we see, hear, feel,
think, and move. This wonderful process begins and is carried forward
in the absorbent system, which has been described by Dr. Carpenter as
a great blood-making gland. But the vital transformation is not
completed until the nutritive materials have been submitted to the
action of the liver, and afterward to the influence of oxygen in the
capillaries of the lungs. The food that was eaten a few hours before
is thus converted into rich scarlet arterial blood, if every part of
the complex vitalizing processes has been properly conducted. But the
influence of oxygen is requisite, not only to complete the
vitalization of the embryo blood in the lungs, it is an absolutely
essential element in every step of the vitalizing process in the
absorbents.

The average quantity of food required to sustain an ordinary man in
health and strength, I have previously stated, is about two pounds
avoirdupois daily, and an equal weight of oxygen is necessary to the
integrity of the vitalizing processes undergone by the food, and to
maintain the physical temperature. When the requisite supply of oxygen
is reduced, the extrication of heat within the system is promptly
diminished, but the vitalization of digested food is unfavorably
affected much more slowly, but with equal certainty. If the quota of
oxygen existing in the arterial blood of the vessels whose duty it is
to supply the vital fluid to the absorbent system, be inadequate to
enable these operations to go on properly, the life-giving processes
must necessarily be imperfectly accomplished. Under these
circumstances the digested material is imperfectly vitalized, and is
therefore inadequately fitted to be used in building up and repairing
the living body. But its course in the system cannot be delayed, much
less stopped.

The blood possesses a definite constitution, which cannot be
materially altered without the rapid development of grave, perhaps
fatal consequences. The nutritive matters received into the blood must
be given up by it to the tissues for their repair, whether such
materials are well or ill fitted for the vital purposes. Dr. B.W.
Carpenter, of London, the celebrated physiologist, makes the following
pertinent statements on this subject, which I condense from his great
work on physiology: "We frequently find an imperfectly organizable
product, known by the designation of tubercular matter, taking the
place of the normal elements of tissue, both in the ordinary process
of nutrition, and still more when inflammation is set up.

From the examination of the blood of tuberculous subjects it appears
that, although the bulk of the coagulum obtained by stirring or
beating is usually greater than that of healthy blood, yet this
coagulum is not composed or well elaborated fibriae, for it is soft
and loose, and contains an unusually large number of colorless blood
corpuscles, while the red corpuscles form an abnormally small
proportion of it. We can understand, therefore, that such a constant
deficiency in capacity for organization must unfavorably affect the
ordinary nutritive processes; and that there will be a liability to
the deposit of imperfectly vitalized matter, instead of the normal
elements of tissue, even without any inflammation. Such appears to be
the history of the formation of tubercles in the lungs and other
organs.

When it occurs as a kind of metamorphosis of the ordinary nutritive
processes and in this manner, it may proceed insidiously for a long
period, so that a large part of the tissue of the lungs shall be
replaced by tubercular deposit without any other sign than an
increasing difficulty of respiration." These views are strongly
corroborated by the following facts:

In making post mortem examinations of persons who have died of
consumption, tubercles of different kinds are found in the same
subject; some of these, having been deposited during what is called
the first stage of the disease before the breathing powers were much
impaired, bear evident traces of organization in the form of cells and
fibers more or less obvious, these being sometimes almost as perfectly
formed as living matter, at least on the superficial part of the
deposit, which is in immediate contact with the living structures
around.

This variety of tubercle has a tendency to contract and remain in the
lungs without doing much injury. But as the disease progressed, and
the breathing capacity progressively diminished, tubercular matter
occurs, evincing less and less organization, showing a tendency to
break down and cause inflammation in the surrounding lung tissue,
until at last we find crude yellow tubercles that have become
softened, and formed cavities almost as soon as they were deposited.

Some cases of chronic consumption pass in a few months through the
various stages from the deposit of the first tubercle to a fatal
termination.

The progress of the disease is determined largely by the nature of the
tubercular matter at the time it is deposited.

The variety of matter which has been partially vitalized commonly
exists in small quantity, has a strong tendency to maintain its
semi-organized condition unchanged by time, and rarely causes
inflammation.

A small or moderate quantity of this sort of tubercle exists in the
lungs of many persons, in whom it produces no tangible symptoms, and
who are therefore quite unconscious of its presence; and even when it
does exist in sufficient quantity to develop the symptoms of lung
disorder, the progress of the disease is slow, often continuing for
many years. It constitutes a variety of consumption which is specially
amenable to proper treatment. On the other hand, the soft, yellow,
cheesy, tubercular matter, which is totally destitute of any vitality,
is too often deposited in large quantities, acts on the adjacent lung
tissue as an active irritant, causes inflammation, undergoes
softening, forms cavities, defies treatment, and rapidly hurries the
sufferers to a premature grave. These facts, taken in connection with
the immunity from lung diseases enjoyed by those whose respiratory
capacity is well developed and properly used, as well as the
beneficial effects that are promptly secured in the favorable
varieties of consumption by any important increase in the vital
volume, I believe fully justify the statement that _tubercles are the
results of defective nutrition directly traceable to inadequate
respiratory capacity_, either congenital or acquired--in other words,
tubercles are composed of particles of food which have failed to
acquire sufficient life while undergoing the vital processes, because
the person in whom they occur habitually breathed too little fresh
air.

Persons who possess what is called the scrofulous constitution are
specially liable to the occurrence of tubercular matter when their
respiration is defective, or they are exposed to any other influences
that favor its development in the organism. But habitually defective
respiration, or the breathing of an atmosphere containing too little
oxygen, which practically amounts to the same thing, has a very
powerful tendency in the same direction, in persons who are apparently
as free from scrofulous taint as any human being can be.


THE VALUE OF COD-LIVER OIL IN THE PREVENTION OF CONSUMPTION.

There is a broad but not commonly recognized distinction between what
constitutes a medicine and a food. All the materials that normally
enter into the composition of the living body, and are necessary to
the maintenance of health and strength, may be property classed as
foods, whether they be obtained from the animal, vegetable, or mineral
kingdoms; thus the iron, sulphur, phosphorus, lime, potash, etc.,
required by the system usually exist in and are organically combined
with the various foods in common use, and they are perhaps quite as
essential to the physical well-being as albuminoid, fatty, and
saccharine matters. When the system is suffering from lack of any of
the above mentioned chemicals, their administration is to be regarded
as the giving of nutritive substances, although they be prescribed by
a physician in divided doses and procured from a pharmacist.

On the other hand, a medicine is any substance that does not naturally
enter into the composition of the body, but which has the power, when
skillfully used, to modify the physical processes so that
physiological disorder--disease, shall be replaced by physiological
harmony--health. Belladonna, hyoscyamus, opium, etc., are familiar
examples of medicaments. Therefore a food is any substance that is
capable of directly contributing to the nutrition of the body, and
medicine is a substance competent, under proper conditions, to secure
the same results indirectly. Viewed in the light of the above
definition, cod-liver oil is to be regarded as a very valuable food,
as well as a most effective remedy both for the prevention and cure of
consumption.

I have previously stated that food is divided by physiologists into
three great classes. The albuminoids are used to build up the
organism, while the fatty and saccharine are burned in the body to
keep it warm. Although these are the chief functions devolving on the
above mentioned food elements, yet they are mutually interdependent on
each other for the proper performance of their several offices. Thus
the albuminoids cannot undergo the wonderful vitalizing process
necessary to fit them to enter into and form part of the living body,
except an adequate quantity of fatty matter be present to assist in
the vital transformation. On the other hand, the assistance of the
albuminoids is equally necessary to enable the fatty and saccharine
foods to maintain the internal heat of the body. Of all fatty matters,
whether derived from the animal or vegetable kingdom, none possesses
the property of stimulating and perfecting the nutritive processes in
so high a degree as cod-liver oil; it is more readily emulsified and
fitted for absorption by the pancreatic secretion during intestinal
digestion than any other fatty matter of which we have any knowledge.
The beneficial effects of its use have been proved in myriads of cases
of confirmed consumption, and if it were used for prolonged periods by
persons who are losing weight, and whose breathing capacity is too
little, along with effective cultivation of the latter function, many
persons would escape this disease who now succumb to it.


THE INFLUENCE OF NORMAL BREATHING ON THE FEMALE GENERATIVE
ORGANS.

[Illustration: FIG. 1.]

The body is divided into three separate stories by two partitions. The
diaphragm, A, separates the cavity of the chest from that of the
abdomen. The partition, _D_, forms a floor for the digestive cavity,
F, and a roof for the pelvis; the pelvic cavity is occupied mainly by
the generative organs. The upper part of the uterus is firmly fixed to
the partition, D, by which the pelvis is covered. Now, the diaphragm,
A, and the external respiratory muscles are in ceaseless motion
performing the act of breathing. The diaphragm acts like the piston of
a pump, both on the lungs above, and on the contents of the abdominal
and pelvic cavities below. When it rises from B to A, it diminishes
the size of the thoracic cavity, compresses the lungs, and assists in
the expiratory part of breathing; at the same time it acts through the
contents of the abdominal cavity on the pelvic roof, D, to which the
uterus is attached, and raises it from D to C. When the diaphragm
contracts, it descends from A to B, increases the size of the thoracic
cavity, inflates the lungs, promotes the inspiratory part of
breathing, pushes the walls of the chest and abdomen outward from F to
E, and lowers the pelvic roof at the same time the uterus sinks from C
to D. When the effect of these respiratory motions is not diminished
by muscular debility, rigidity of the thoracic walls, or by unsuitable
clothing, they have so direct an effect on the pelvic contents that
the uterus and its appendages make two distinct motions every time a
woman breathes. When the diaphragm rises and the breath is expelled,
the womb is elevated from one inch to one inch and a half, because the
roof of the pelvis, to which it is attached, is lifted about this
distance, because of gentle suction from above. The uterus and its
appendages are thus kept in constant motion, up and down, chiefly by
action of the muscles by which breathing is carried on.

Several influences combine to maintain the circulation of the blood.
The pumping action of the heart and the affinity of the blood for the
walls of the capillary vessels require to be assisted by the motion
both of the body as a whole and of its parts in order to keep the
circulation flowing equably through every tissue. Therefore muscular
action and the resulting bodily motion play a very important part in
maintaining the general and local blood circulation. During the
contraction of a muscle, the blood current flowing through it is, for
the time being, retarded, but when relaxation occurs the blood flows
into its vessels more freely than if no momentary cessation had taken
place. When the body or any of its parts is deprived of motion, the
blood circulation stagnates, and the nutrition, general or local, as
the case may be, promptly becomes impaired. This is specially true of
the uterus. Gentle but constant motion is absolutely essential to keep
up a healthy uterine blood circulation. Nature has provided for the
automatic performance of all the ceaseless internal motions that are
necessary to the continuance of life and the preservation of health;
thus the heart beats, the respiratory muscles act, the stomach
executes a churning motion during gastric digestion, the intestines
pass on their contents by worm-like contractions, automatically
without our supervision and without causing fatigue, being under the
control of the sympathetic system of nerves chiefly. It is equally
true, but not so well recognized, that the previously described
motions that are committed to the pelvic organs from the respiratory
apparatus are absolutely necessary to the continued health of the
uterus and its appendages. But the womb is not under the control of
the voluntary muscles, therefore it cannot be directly moved by them,
nor are its necessary motions influenced by the sympathetic system of
nerves as are the heart, stomach, and intestines, etc., but it is
fortunately under the indirect but positive control of involuntary
muscles that never, as long as breathing continues, cease their work.
Nature has thus made ample provision to keep the uterus in automatic
motion. As before stated, the natural ceaseless heavings of the lungs,
chest, and diaphragm, aided by the muscles inclosing the abdomen, have
the duty assigned them of communicating automatic motion to the uterus
and the other contents of the pelvis. When the diaphragm descends from
A to B, and the lungs are filled with air, the uterus sinks in the
pelvic cavity in obedience to the downward pressure from above, as
before stated; the circulation through the uterus is then for a moment
retarded, but the next instant, when the lungs are emptied of air and
the diaphragm rises, the blood flows forward more freely than if it
had not been momentarily obstructed. Ample provision has thus been
made to maintain a healthy circulation through the uterus.

The uterine motions I have described are fully adequate for the
purposes indicated. But when the natural stimulus of motion is
withheld, the circulation becomes sluggish causing congestion, which
may develop into inflammation. Under these conditions the uterus
gradually becomes displaced, falling backward, forward or downward as
the case may be. The blood vessels by which the uterus is supplied
thus have their caliber diminished by bending; the circulation through
them is retarded just as the flow of water in a rubber tube is
obstructed by a kink. A very good idea of what occurs in the uterus
under the conditions just described may be obtained by winding a
string around the fingers.

As the coats of the arteries are thick, and the pressure exerted by
the ligature has less power to prevent the arterial blood flowing
outward past the string to the end of the finger than it has to
prevent the return of the venous blood toward the heart, therefore the
part beyond the ligature soon becomes congested, the blood stagnating
in the capillaries. If the ligature be sufficiently tight and kept on
long enough, mortification will take place, but if the circulation be
only moderately obstructed, the congestion will continue until
ulceration occurs. A similar condition is developed in the uterus when
the necessary natural stimulus of motion fails to be communicated to
it or when it is so far out of its proper place that the circulation
through it is obstructed.

I believe the above described condition to be a most potent but
inadequately recognized cause of the various forms of uterine diseases
that distress so many women.


SHOWING HOW THE BREATHING POWERS MAY BE DEVELOPED.

When the circumference of the chest bears a due proportion to the size
of the body generally; when its walls and the lungs possess a suitable
degree of elasticity; when the strength of the respiratory muscles is
adequate to their work, and no undue opposition is offered to the
breathing motions by the clothing--then the vital volume is always up
to the full requirements of the system. But when one or all of these
are lacking in any important degree, the breathing capacity is
proportionately diminished. If the testimony of the spirometer be
corroborated by the impaired physical condition of the individual, its
correction should be sought in part at least by enlarging the chest,
increasing the elasticity of its walls and of the lungs, and by
augmenting the strength of the respiratory muscles. These results may
commonly be secured by diligent and persevering use of the following
exercises:

[Illustration: FIG. 2.]

A trapeze, Fig. 2, should be suspended from the ceiling, so that the
bar shall be six inches above the head of the person who is to use it;
the toes should be placed under straps nailed to the floor to keep
them in position. Then if the bar be grasped and the body thrown
forward, the trapeze, the arms, and the body will form the segment of
a circle.

The exercise is taken by causing the body to describe a complete
circle in the manner indicated in the cut. Little muscular effort is
required if the motion be rapid, because the momentum is sufficient to
carry the body around; but if the rotation be slow, more exertion is
required. This movement is specially adapted to the breathing powers
of weak persons, yet the most vigorous can readily get from it all the
exercise their chest and lungs require.

By means of these exercises the chest is gently but effectively
expanded in every direction and the elasticity of its walls promoted,
the air cells are expanded, and the lungs are rendered more permeable
to the respired air, and the strength of the respiratory muscles is
developed.

[Illustration: Fig. 3.]

Fig. 3 illustrates an exercise for the chest that is taken without any
apparatus other than an ordinary doorway. The exerciser should stand
in the position indicated in the engraving, and then step forward with
each foot alternately as far as possible without stretching the chest
too severely. The longer the step the more vigorous the exercise will
be.

[Illustration: Fig. 4.]

Fig. 4 shows an exercise taken between two chairs; the position
indicated in the cut having been assumed, the chest is then slowly
lowered and raised three to six times. This exercise is adapted to
strong persons only.


THE EFFECTS OF ADEQUATE RESPIRATION IN SPECIAL CASES.

When the nutrition of the body is promoted by effective respiration,
and waste matters are promptly removed, the chances that tubercle will
be developed in persons who are predisposed thereto are reduced to a
minimum.

Better materials are furnished by the nutritive processes to renew the
tissues, so that the occurrence of those degenerations that result in
various fatal affections, peculiar to the decline of life, are
rendered much less probable or are prevented altogether, and the
chances that death shall take place by old age is increased. The
system possesses much greater resisting power against the influence of
malaria and the poisons that give rise to typhoid fever, scarlatina,
diphtheria, measles, etc.

When the motions of a woman's respiratory organs are normal and are
properly communicated to the pelvic organs, she enjoys the greatest
possible immunity attainable against the development of any diseases
peculiar to the sex.

       *       *       *       *       *




VITAL DISCOVERIES IN OBSTRUCTED AIR AND VENTILATION.[1]

[Footnote 1: Read by Wm. C. Conant before the Polytechnic Association
of the American Institute, New York, May 10, 1883.]


I suppose that we all consider ourselves to be sufficiently impressed
with the importance of ventilation. If I should stop here to declaim
against foul exhalations, or to dwell upon the virtues of fresh air,
you might feel inclined to interrupt me by saying, "Oh, we know all
about that! If you have anything practical to advance, come to the
point." Gentlemen, I beg your pardon, but I must say that the great
fact concerning ventilation, as yet, is that its strongest advocates
are not conscious of one-half the seriousness of the subject; and the
second fact is that the supposed means of ventilation prescribed by
science _fail to secure it_.

This, then, is my point to-night--the supreme necessity, still urgent,
and _universally_ urgent, for a reformation of the breath of life. I
believe in a promised time when the days of a man's life shall again
be as the days of a tree. And next to the abolition of vice and sin, I
believe that the very grandest factor of such result must be an entire
disuse of obstructed air for the lungs. I propose to bring forward
some evidence of the necessity, and likewise of the possibility, of a
reform so radical and sweeping as this. The subject is too wide for
the occasion. I shall be able to read only extracts from what I have
prepared, in the few minutes that you can give with patience to my
unpracticed lecturing.

The best prescription that doctors have to give (when we are not too
far gone to take it) is to live out of doors. Why is this? Why is life
out of doors proverbially synonymous with robust health? Why is it
that a superior vitality, and a singular exemption from disease,
notoriously distinguish dwellers in the open air, by land or sea?
Without disparaging the virtues of exercise or of bracing temperature,
indispensable as these are for the recuperation of enfeebled
constitutions, we must admit that among the native and settled
inhabitants of the open air high health is the rule in warm climates
as well as in cold, and with the very laziest mortals that bask in the
sun, or loaf in the woods. The fact is that simple vegetative health
seems to be nearly independent of all other external conditions but
that of a pure natural diet for the lungs. Man in nature seems to
thrive as spontaneously as plants, by the free grace of air, earth,
and sun. On the other hand, the very diseases from which houses are
supposed to defend us--that most numerous class resulting from
colds--are the special scourge of the lives that are most carefully
shielded from their commonly supposed cause--exposure to the open air.
Those diseases diminish, and entirely disappear, just so far as
exposure in the pure and freely moving air becomes complete and
habitual. Soldiers, inured to camp life, catch cold if they once sleep
in a house; and, generally speaking, the inhabitants of the free air
contract colds _only_ by exposure to confined exhalations from their
own or other bodies, within the walls of houses. The explanation of
this is plain and simple: Carbonic acid detained within four walls
accumulates in place of the breath of life--oxygen--and narcotizes the
excretory function of the skin. The moment that this great and
continual vent of waste and impurity from the system is obstructed,
internal derangement ensues in every direction. All hands, so to
speak, are strained to extra duty to discharge the noxious
accumulation. The lungs labor to discharge the load thrown back upon
them, with hastened respiration, increased combustion, and feverish
heat. The pores of the mucous membrane in the nose, throat, alimentary
canal, or bronchial passages, are forced by an aggravated discharge
(or catarrh), and this congestive and inflammatory pressure is a fever
also. There is nothing of "cold" about it except as an auxiliary and
antecedent, in cases where an external chill has struck upon nerves
already half paralyzed by the universal narcotic--carbonic acid--which
house dwellers may be said to "smoke" perpetually.

So much for nerve-poison; but blood-poisoning is a still more terrible
characteristic of house-protected existence. It is now the almost
universal opinion of the medical profession that the whole class of
malarial and zymotic diseases that make such frightful progress and
havoc in the most civilized communities, are due to living germs with
which the exhalations of organic waste and decay are everywhere loaded
in inconceivable numbers. They are known to multiply themselves many
times over, every two or three hours. They swarm into the blood by
millions, through all the absorbents, especially those of the lungs,
that drink the atmosphere in which they are suffered to linger and
propagate. Mr. Dancer, the eminent microscopist, counted in a sample
from such an atmosphere a number of organized germs equivalent to
3,700,000 in the volume of air hourly inhaled by one person. That is
over 60,000 germs per minute, and about 2,000 in every breath. In the
blood, they still propagate, and feed, and grow, consuming its oxygen,
thus defeating its purification, and turning that stream of otherwise
healthful and invigorating nutrition into a stream of effete and
corrupt matter--a sewer rather than a river of life--or at best an
impoverished and impure supply for the support of existence.

The same pestilential but invisible hosts of bacteria, mustered and
bred in the close filthiness of Oriental cities, and jungles, swarm
out as Asiatic cholera on the wings of the wind, sweeping the wide
world with havoc. Settled on the tropical shores of the Eastern
Atlantic, they lie in wait for their victims in the sluggish and
terrible coast fever. On the western coast of the same ocean, perhaps
from some cause connected with oceanic or atmospheric currents, they
make devastating irruptions inland, as yellow fever, in every
direction where the walls of their enclosure are low enough to be
freely passed. These, let us remember, are all essentially the same
organic poison that is engendered _wherever_ life and death are plying
their perpetual game; and this, like Cleopatra's "worm, will do its
kind" in the veins of man, wherever obstructions, natural or
artificial, temporary or permanent, interfere with its prompt
diffusion in the vastness of the general atmosphere. Our "house of
life" stands generously open, for every "inmate bad" to come and go
through the absorbent, unquestioned, except in the stomach, where the
tangible poisons have to go by the act of swallowing and where they
are often challenged and ejected. It seems at first thought very
strange that we are not so well protected by natural instinct or
sensibility from the subtle poisons of the atmosphere as from those
that can affect us only by the voluntary act of swallowing. The
obvious explanation, however, of this apparent neglect is that Nature
protects us in general from gaseous poisons by her own system of
ventilation; and if, when we devise houses, necessarily excluding that
system, we fail to devise also a sufficient substitute for it, the
consequences of such negligence are as fairly due as when we swallow
tangible poison.

I have hitherto referred only to the _dispersion_ of poisonous
exhalations, as if the best and most necessary thing the atmosphere
can do for us were to dilute the dose to a comparatively harmless
potency. But this is now known to be not the true remedial process
with respect to the zymotic germs. The most wonderful achievement of
recent investigation reveals a philosophy of both bane and antidote
that astonishes us with its simplicity as much as with its efficiency.
At the moment when humanity stands aghast at the announcement that
germs are not destroyed by disinfectants, comes the counter discovery
that they are rendered harmless by oxygen. It seems that it makes no
difference, really, of what sort or from what source are the bacteria
that we take into the blood. The only material difference to us
depends on _the sort of atmosphere_ in which their hourly generations
are bred. For example, the bacteria _developed in confined air_, from
a simple infusion of hay, are found by experiment to be as capable of
generating that most terrible of blood poisoners, the malignant
pustule, as are the bacteria taken from the pustule itself.

On the other hand, the bacteria from the malignant pustule itself,
after propagating for a few hours in pure and free air, become a
perfectly harmless race, and are actually injected into the blood
with impunity. The explanation of the strange discovery is this--note
its extreme simplicity--bacteria bred in copious oxygen perish for
want of it as soon as they enter the blood vessels; whereas those
inured to an unventilated atmosphere for a few generations, which
means only a few hours, are prepared to thrive and propagate
infinitely within our veins; and that is the whole mystery of blood
poisoning and zymotic diseases. Taken in connection with the narcotic
or _nerve-poisoning_ power of carbonic acid (to which all the classes
of diseases resulting from colds are due), we have also in this simple
but grand discovery the whole mystery of the question with which we
set out--why free air is health, and why sickness is a purely domestic
product. The restitution of natural health to mankind demands only,
but demands absolutely, the constant diffusion in copious and
continuous floods of atmospheric oxygen, of the nerve-poisoning
carbonic acid of combustion (organic and inorganic), and of the
blood-poisoning bacteria of organic decomposition.

We find, then, as a matter both of experience and of philosophy, that
life or death, in the main and in the long run, turns on the single
pivot of atmospheric movement or obstruction. The resistance of mere
rising ground or dense vegetation to a free movement of the air from
low-lying levels performs an obstructive office similar to that of the
walls and roofs of houses, and with like effect. The invariable
condition of unhealthy _seasons_ and _days_ is a state of rarefaction
and stagnation of the atmosphere, when the poison-freighted vapor
cannot be lifted and dispersed, and every one complains of the sultry,
close, "muggy" (meaning _murky_) feeling of the air. Few reflect, when
fretted by the boisterous winds of March, upon the vital office they
perform in dispersing and sanitating the bacteria-laden exhalations
let loose by the first warmth from the soaked soil and the macerated
deposits of the former year.

The passing air, then, that we breathe so lightly, is on other
business, and carries a load we little think of, and that is not to be
trifled with. This grand carrier of nature, on business of life or
death, must not be detained, must not be hindered! or they who
interfere with the business by restraining walls and roofs will take
the consequences. It is a good deal like stopping a bullet, except as
to consciousness and suddenness of effect.

That men live at all in their obstructed and therefore poison-loaded
atmosphere, is a proof of the wonderful efficiency of the protective
economy of Nature within us; so wonderful, indeed, that few can
believe the fact of living to be consistent with the real existence of
such a deadly environment as science pretends to reveal. It is a
common impression, therefore, that actual results fail to justify the
alarm sounded by sanitarians. Hence the necessity for calling
attention at the outset to an ample and manifest equivalent for the
deadly dose of confined exhalations taken daily by all civilized men.
We perceive that that dose is not lost, like the Humboldt River, in a
"sink," but reappears, like the wide-sown grass, in a perennial and
universal crop of diseases, almost numberless and ever increasing in
number, peculiar to house-dwellers. The trail of these plagues stops
nowhere else; it leads straight to the imprisoned atmosphere in our
artificial inclosures, and there it ends. That marvelous protective
economy of Nature within us, to which we have referred, is no
perpetual guaranty against the consequences of our negligence; it is
only a limited reprieve, to afford space for repentance; and unless we
hasten to improve the day of grace, the suspended sentence comes down,
upon us at last with force the more accumulated by delay.

Now, therefore, the grand problem of sanitary science (almost
untouched, almost unrecognized) proves to be no other and no less than
this:

What can be done to remedy the obstructive nature of an inclosure, so
that its gaseous contents shall _move off_, and be replaced by pure
air, as freely, as rapidly, and as incessantly, as in the open
atmosphere?

It happens to be the most necessary preliminary in approaching this
problem, to show how _not_ to do it, for that, respectfully be it
spoken, is what we have hitherto practiced, as results abundantly
prove. Fallacies, both vulgar and scientific, obstruct our way. A
fundamental fallacy respects the very nature of the work, which is
supposed to be _to get in fresh air_. In point of fact, this care is
both unnecessary and comparatively useless. Take care of the bad air,
and the fresh air will take care of itself. Only make room for it, and
you cannot keep it out. On the other hand, unless you first make room
for it, you cannot keep it _in_; pump it in and blow it in as you may,
you only blow it _through_, as the Jordan flows comparatively
uncontaminated through the Dead Sea. This is a law of fluids that must
be kept in view. The pure air is quite as ready to get out as to get
in; while the air loaded with poisonous vapors is as sluggish as a
gorged serpent, and will not budge but on compulsion. Such compulsion
the grand system of wind _suction_, actuated by the sun, supplies on
the scale of the universe; and this we must imitate and adapt for our
more limited purposes.

It would seem as if we need not pause to notice so shallow though
common a notion as that which usually comes in right here, namely,
that confined air will move off somehow of itself, if you give it
liberty; being supposed to be much like a cat in a bag, wanting only a
hole to make its escape. Air is ponderable matter--as much so as
lead--and equally requires force of some kind to set it or keep it in
motion. But applied philosophy itself relies on a fallacious, or, at
best, inadequate source of motive power for ventilation. It gravely
prescribes ventilating flues and even holes, and promises us that the
warmed air within the house will rise through these flues and holes,
carrying its impurities away with it, from the pressure of the cooler
and denser air without. But we very well know that the best of flues
and chimneys will draw only by favor of lively fires or clear weather.
They fail us utterly when most needed, in warm and murky weather, when
the barometer is low, and the thin atmosphere drops, down its damp and
dirty contents, burying us to the chimney tops in a pestilent
congregation of vapors.

Nevertheless, so far as I can discover, these holes and flues, at best
a little fire at the bottom of the latter, are the sole and
all-sufficient expedients of science and architecture for ventilation
to this _day_, in spite of their total failure in experience. I can
find nothing in standard treatises or examples from philosophers or
architects, beyond a theoretical calculation on so much expansion of
air from so many units of heat, and hence so much ascensional force
_inferred_ in the ventilating flue--a result which never comes to
pass, yet none the less continues to be cheerfully relied on.
Unfortunately for the facts, they contradict the philosophy, and are
only to be ignored with silent contempt. A French Academician's report
on the ventilation of a large public building, lately reprinted by the
Smithsonian Institution, states with absolute assurance and exactness
the cubic feet of air changed per minute, with the precise volume and
velocity of its ascension, by burning a peck of coal at the bottom of
the trunk flue. No mention is made of the anemometer or any other
gauge of the result asserted, and we are left to the suspicion that it
is merely a matter of theoretical inference, as usual; for every one
who has had any acquaintance with practical tests in these matters
knows that no such movement of air ever takes place under such
conditions, unless by exceptional favor of the weather.

I have seen a tall steam boiler chimney induce through a four inch
pipe a suction strong enough to exhaust the air from a large room as
fast as perfect ventilation would require. But this, it is well known,
requires four hundred or five hundred degrees of heat in the chimney.
I never saw an ordinary domestic fire of coals produce any noticeable
ventilating suction, without the use of a blower, urging the
combustion to fury, and I presume nobody else ever did.

But, while nobody ever saw an active suction of air produced by the
mere heat of a still or unexcited fire--unless the _quantity_ of heat
were on a very large scale--everybody has seen a roaring current
sucked through the narrowed throat of a chimney or a stove by a
blazing handful of shavings, paper, or straw. It is very remarkable,
when you come to think of it, that the burning of an insignificant
piece of paper, with less heat in it, perhaps, than a pea of
anthracite, will cause a rush of air that a bushel of anthracite
cannot in the least degree imitate. It is not only a curious but a
most important fact. In short, it is _the cardinal_ fact on which
ventilation practically turns. But what is the nature of it? There are
three factors in the phenomenon. In the first place, the mechanical
peculiarity of flame, or gas in the moment of combustion, as compared
with a gas like air merely heated, is _an almost explosive velocity of
ascent._ The physical peculiarity from which this results is the
intensity of its heat--commonly stated at 2,000 degrees, as to our
common illuminating gas--acting instantaneously throughout its mass,
just as in gunpowder. The gas goes up the flue in its own flash, like
the ignited charge in the barrel of a gun: the burning coals can only
_send_, and by a leisurely messenger, namely, the moderately heated
gases, and contiguous air, that rise only by the gravitation or
pressure of the surrounding atmosphere.

And yet it is not the small flame itself that roars in the chimney but
the rush of air induced by it. The semi-explosion of flame is but for
an instant, though constantly renewed, and its explosive impulse
cannot carry its light products of combustion very far through
stationary and resistant air. It is _the induction of air_ carried
with it by such semi-explosive impulse (under proper mechanical
conditions) that is strange to our observation and understanding, and
is the second factor in the phenomenon we are accounting for and
preparing to utilize.

The process, as it actually is, may be clearly exhibited by a very
simple means. Let anyone take a tube, say an inch in diameter--a roll
of paper will do as well as anything--and, applying it closely to his
mouth, try the whole force of his lungs through it upon any light
object. The amount of effect will be found surprisingly small; and
unless the tube is a short one, it will be so far absorbed by friction
and atmospheric resistance as to be almost imperceptible. Then let him
hold the same tube near to the mouth, but not in contact, and repeat
the experiment. With the best adjustment, the effect may be described
as tenfold or fifty-fold, or almost any fold--the effect of the simple
blowing being merely nominal as compared with the induced current
added by blowing _into_ the tube instead of _in_ it. The blast enters
the free and open orifice with all the contiguous air which its
surface friction and the vacuum of its movement can involve in its
rolling vortex. While the entrance is thus crowded with pressure, the
exit is free; and the result at the exit is a blast of well sustained
velocity and _magnified volume;_ ready itself to repeat the miracle on
a still larger scale if provided with the apparatus for doing so. To
test this, now place a second and larger tube in such position as to
prolong the first in a straight line, but with a slight interval
between the meeting ends; so that the blast, as magnified in volume in
entering the first tube, may enter in like manner the second tube and
be magnified again. With correct adjustments this experiment will
prove more surprising than the first. Put on a third and still larger
tube in the same way, and still larger surprise will meet a still
larger volume and force of blast, like a stiff breeze set in motion by
the puny effort of a single expiration. Of course, the prime impulse
must bear a certain proportion to the result; and the inductive or
tractional friction of the initial blast, of flame or breath, will be
used up at length unless re-enforced. In ventilating practice, there
_is_ such re-enforcement, from an excess of gravity in the cooler
atmosphere outside the flue in which the flame is operating with its
heat as well as its ascensional traction; so that there has been found
no limit to the extensions and fresh inductions that may be added to
the first or trunk flue, with increase rather than diminution of power
at every point. But the terms on which such extensions must be made
have been referred to in our illustration, and must be accurately
ascertained and observed. They constitute what is, in effect, the
third factor in the phenomenon of a roaring draught, and also,
therefore, ineffective ventilation. That is, the entering or induced
current of air must always find its channel of progress and exit
certain correct degrees larger than the opening by which it entered.
Every one knows that a stove or chimney wide open admits of but little
suction in connection with even the blaze of paper or shavings.

The mobility of air seems almost preternatural, when the proper
conditions for setting a current in motion are supplied. But without a
current established, it is surprising in turn to find how obstinately
and elusively immovable it can be. It is like tossing a feather; or
trying to drive a swarm of flies; dodging and evading every impulse
applied. But, given a flue, to define and conduct a stream; an upright
flue, to take advantage of the slighter gravity of the warmed air
within it; and a flue contracted at the inlet and expanded as it
rises, so as to free, diffuse, and lighten the column of air, toward
the exit; _then_, initiate an induced current of air at the inlet, by
the injection of a jet of gas in the state of semi-explosive action
called flame; the pressure pushing upward from the crowded entrance
finds easier way and less resistance the farther it goes in the
expanding flue; the warmth and reduced gravity of the stream comes in
as an auxiliary in overcoming friction and any exceptional obstruction
in the state of the atmosphere; and now, as the ball is once set
rolling, with a little _aid_ instead of resistance from gravitation,
its initial impulse all the while sustained by the gas jet, and
friction reduced to a very small incident--there is nothing to prevent
the current rolling on with accelerated velocity (within the
limitations imposed by increasing friction) and rolling on forever. I
might, if I had time, add a curious consideration of the law of
_vortex motion_ in elastic fluids, demonstrated by Helmholtz, which
relieves the motion of such fluids from friction, as wheels facilitate
the movement of a solid; and which also sucks into the rolling vortex
the contiguous air, thus entraining it, as we have seen, so much more
effectively than could be done by a direct and rigid current, like a
jet of water, for instance. A wheel set in motion on an almost
frictionless bearing of metalline, runs without perceptible abatement
of velocity, until one begins to involuntarily question whether it
will ever stop. In the all but free winds that roll with minimized
friction in the higher atmosphere, there seems to be a self-moving
force; so persistent is simple momentum in a mass so infinitesimally
obstructed and so infinitely wheeled. An active current of air in a
ventilating flue is only less perfect in the same conditions; and so
it is quite conceivable, and not incredible, that such a current may
be gradually established and thenceforward permanently maintained by a
small motor flame barely more than enough to overbalance the minimized
friction. This is not a supposed or theoretically inferred fact, like
the facts of ventilation sometimes alleged by theorists. On the
contrary, the theory I have offered is merely an attempt to explain
facts that I have witnessed and that anyone can verify with the
anemometer. But the _theory_ by no means covers the art and mystery of
ventilation; for ventilation is truly an _art_ as well as a mystery.
The art lies in a consummate experience of the sizes, proportions, and
forms of flues, their inlets, expansions, and exits, with many other
incidental adaptations necessary, in order to insure under _all_
circumstances the regular exhaustion of any specific volume of air
required, per minute. And this art has by one man been achieved. It
would be a double injustice if I should neglect from any motive to
inform my audience to whom I am indebted for what I know about
ventilation practically, and even for the knowledge that there is any
such fact as a practicable ventilation of houses; one who is no
theorist, but who has felt his way experimentally with his own hands,
for a lifetime, to a practical mastery of the art to which I have
attempted to fit a theory; every one present who is well informed on
this subject must have anticipated already in mind the name of Henry
A. Gouge.

       *       *       *       *       *




THE RECENT ERUPTION OF ETNA.


On the morning of the 20th of March, a long series of earthquakes
spread alarm throughout all the cities and numerous villages that are
scattered over the sides of Mt. Etna. The shocks followed each other
at intervals of a few minutes; dull subterranean rumblings were heard;
and a catastrophe was seen to be impending. Toward evening the ground
cracked at the lower part of the south side of the mountain, at the
limit of the cultivated zone, and at four kilometers to the north of
the village of Nicolosi. There formed on the earth a large number of
very wide fissures, through which escaped great volumes of steam and
gases which enveloped the mountain in a thick haze; and toward night,
a very bright red light, which, seen from Catania, seemed to come out
in great waves from the foot of the mountain, announced the coming of
the lava.

[Illustration: ERUPTION OF MOUNT ETNA, MARCH 22, 1883.]

Eleven eruptions occurred during the night, and shot into the air
fiery scoriæ which, in a short time, formed three hillocks from forty
to fifty meters in height. The jet of scoriæ was accompanied with
strong detonations, and the oscillations of the ground were of such
violence that the bells in the villages of Nicolosi and Pedara rang of
themselves. The general consternation was the greater in that the
locality in which the eruptive phenomena were manifesting themselves
was nearly the same as that which formed the theater of the celebrated
eruption of 1669. This locality overlooks an inclined plane which is
given up to cultivation, and in which are scattered, at a short
distance from the place of the eruption, twelve villages having a
total population of 20,000 inhabitants. On the second day the
character, of the eruption had become of a very alarming character.
New fissures showed themselves up to the vicinity of Nicolosi, and the
lava flowed in great waves over the circumjacent lands. This seemed to
indicate a lengthy eruption; but, to the surprise of those interested
in volcanic phenomena, on the third day the eruptive movement began to
decrease, and, during the night, stopped entirely. This was a very
fortunate circumstance, for this eruption would have caused immense
damages. It cannot be disguised, however, that the eruptive attendants
of this conflagration remain under conditions such as to constitute a
permanent danger for the neighboring villages. It has happened, in
fact, that in consequence of the quick cessation of the eruption,
those secondary phenomena through which nature usually provides a
solid closing of the parasitic craters have not occurred. So it is
probable that when a new eruption takes place it will be at the same
point at which manifested itself the one that has just abated.--_La
Nature_.

       *       *       *       *       *




PHYSICS WITHOUT APPARATUS.


Take an ordinary wine bottle and place it in front of and within a few
inches of a lighted candle. Blow against the bottle with your mouth at
about four or six inches distant from it and in a line with the flame.
Very curiously, notwithstanding the presence of the bottle and its
interception of the current of air, the candle will be immediately
extinguished as if there were no obstacle in the way. This phenomenon
is readily understood when we reflect that the bottle receives the
current of air on its polished surface and divides it into two, one of
which is guided to the right and the other to the left. These two
currents, after separating and driving back the surrounding air, meet
again at the very spot at which the flame is situated, and extinguish
the candle.

[Illustration: MODE OF EXTINGUISHING A CANDLE PLACED BEHIND A
BOTTLE.]

It is evident that the experiment can be reproduced by putting the
candle behind a stove pipe, a cylinder of glass or metal, a
cylindrical tin box, or any other object of the same form with a
diameter greater than that of a bottle, but not having a rough or
angular surface, since the latter would cause the current to be lost
in the surrounding air.

       *       *       *       *       *




THE TRAVELS OF THE SUN.


Some recent discussions of the constitution of the sun have turned in
part upon what is known as the sun's proper motion in space. This is
one of the most surprising and interesting things that science has
ever brought to light, and yet it is something of which comparatively
few persons have any knowledge. It is customary to look upon the sun
as if it were the center of the universe, an immovable fiery globe
around which the earth and other planets revolve while it remains
fixed in one place. Nothing could be further from the truth. The sun
is, in fact, the most wonderful of travelers. He is flying through
space at the rate of not less than a hundred and sixty millions of
miles in a year, and the earth and her sister planets are his fellow
voyagers, which, obeying his overpowering attraction, circle about him
as he advances. In other words, if we could take up a position in open
space in advance of the sun, we should see him rushing toward us at
the rate of some 450,000 miles a day, chased by his whole family of
shining worlds and the vast swarms of meteoric bodies which obey his
attraction.

The general direction of this motion of the solar system has been
known since the time of Sir William Herschel. It is toward the
constellation Hercules, which, at this season, may be seen in the
northeastern sky at 9 o'clock in the evening. As the line of this
motion makes an angle of fifty odd degrees with the plane of the
earth's orbit, it follows that the earth is not like a horse at a
windlass, circling around the sun forever in one beaten path, but like
a ship belonging to a fleet whose leader is continually pushing its
prow into unexplored waters.

The path of the earth through space is spiral, so that it is all the
time advancing into new regions along with the sun. She is on a
boundless voyage of discovery, and her human crew are born and die in
widely separated tracts of space. Think of the distance over which the
travels of the sun have borne the earth only since the beginning of
human history! Six thousand years ago the earth and sun were about a
million millions of miles further from the stars in Hercules than they
are to-day. Columbus and his contemporaries lived when the earth was
in a region of the universe more than sixty thousand millions of miles
from the place where it is now, so that since his time the whole human
race has been making a voyage through space, in comparison with which
his longest voyage was as the footstep of a fly.

Thus the great events in the history of the world may be said to have
occurred in different parts of the universe. An almost inconceivable
distance separates the spot which the earth occupied in the time of
Alexander from that which it occupied when Cæsar invaded Gaul. The sun
and the earth have wandered so far from their birthplace that the mind
staggers in the attempt to guess at the stupendous distance which now
probably separates them from it. It may be that the motion of the
solar system is orbital and that our sun and many of the stars, his
fellow suns, are revolving around some common center, but if so, no
means has yet been devised of detecting the form or dimensions of his
orbit. So far as we can see, the sun is moving in a straight line.

Since space is believed to be filled with some sort of ethereal
medium, curious consequences are seen to follow from the motions that
have been described. A solid globe like the earth rushing at great
speed through such a medium will encounter some resistance. If the
medium be exceedingly rare, as it must be in fact, the resistance will
be correspondingly small, but still there will be resistance. If the
sun stood still, the earth, owing to the inclination of its axis to
the plane of its orbit, around the sun, would encounter the resistance
of the ether principally on its northern hemisphere from summer to
winter, and on its southern hemisphere from winter to summer. But in
consequence of the motion of the sun shared by the earth, this law of
distribution is changed, and from summer to winter the earth plows
through the ether with its north pole foremost, while from winter to
summer, although the resistance of the ether is encountered more
evenly by the two hemispheres, yet it is still felt principally in the
northern hemisphere, and the south pole remains practically protected.
It follows that the southern hemisphere, and particularly the south
polar regions are more or less completely sheltered the whole year
around. It might then be supposed that the impact of the particles of
the ether shouldered aside by the earth in its swift flight and the
compression produced in front of the advancing globe would tend to
raise the temperature of the northern hemisphere as compared with the
southern hemisphere, while the south pole, being more or less directly
in the wake of the earth, and in a region of rarefaction of the ether,
would constantly possess a remarkably low temperature.

Now, it is known that the south polar regions are more covered with
ice and snow than those of the north, and that the temperature there
the year around is lower. Whether this difference is owing to the
effects of the earth's journey through the ether, is a question.

The sun, too, moves with his northern hemisphere foremost, and it is
worthy of remark that it has been suspected that the northern
hemisphere of the sun radiates more heat than the southern.

But whatever effect it may or may not have upon the meteorological
condition of the earth, the fact that the solar system is thus
voyaging through space is in itself exceedingly interesting. Not the
wildest traveler's dream presents to the imagination such a voyage as
this on which every inhabitant of the earth is bound. A glance at a
star map shows that the direction in which we are going is carrying us
toward a region of the heavens exceedingly rich in stars, many, and
perhaps most, of which are greater suns than ours. There can be little
doubt that when the sun arrives in the neighborhood of those stars, he
will be surrounded by celestial scenery very different from and much
more brilliant than that of the region of space in which he now is.
The inhabitants of the globe at that distant period will certainly
behold new and far more glorious heavens, though the earth may be
unchanged.--_N.Y. Sun._

       *       *       *       *       *




PROPAGATION OF MAPLE TREES.


I do not presume that all people over three score years of age are so
entirely ignorant as I am, but probably there are some. I have lived
more than sixty years almost in the woods, and I never observed, and
never heard any other person speak of, the blooming, seeding, and
maturing of the water maple. I have a beautiful low of water maple
shade trees along the street in front of my house. In March, 1882, I
observed that they were in bloom, and many bees were swarming about
them. After the bees left them I noticed the seed (specimens inclosed
of this spring's growth) in millions. As the leaves put out in April
the little knife blade seeds fell off, so thick as to almost cover the
ground. My grandson picked up three or four hatfuls, and I sent the
seed to my farm and had them drilled in like wheat, when I planted
corn. The result is I have from 300 to 500 beautiful maples from 6
inches to three feet high. I noticed the blooms again this spring, but
a cold snap killed the blooms, and only now and then can I find a
seed. I had a sugar tree in my yard, which bloomed and bore seed which
did not fall off through the summer. My yard now has as many little
sugar trees as it has leaves of blue grass.

It strikes me that the gathering and planting of maple seed is the
best way to wood the prairies of the West and the worn-out lands of
the Eastern and Middle States. The tree is valuable for shade and for
timber, and is as rapid in growth as any tree within my knowledge. I
noticed some trees of this sort yesterday which are from 2½ to 3½ feet
in diameter. The lumber from such timber makes beautiful furniture.
This is intended only for those who have been as non-observant as
myself, and not the wise, who are always posted.

                                       Franklin, Tenn.    J.B.M.

The seeds inclosed were the samaras of _Acer rubrum_, called the
"soft" maple in many localities, and "red" maple in others. We have
seen trees only three or four inches in diameter full of blossoms.
This is one of the earliest trees to bloom in spring, and the pretty
winged samaras soon mature and fall. The sugar maple, _Acer
saccharinum_, blossoms later, and the seeds are persistent till
autumn, and lie on the ground all winter before germinating. The
lumber from this latter is more valuable than soft maple, being
harder, heavier, and taking a better polish. Soft maple makes an
ox-yoke which is durable and not heavy. In early times a decoction of
the bark was frequently used for making a black ink.--_Country
Gentleman._

       *       *       *       *       *




DIOSCOREA RETUSA.


[Illustration: FLOWERING SPRAY OF DIOSCOREA RETUSA.]

One of the most elegant plants one can have in a greenhouse is this
twiner, a native of South Africa. It has slender stems clothed with
distinctly veined leaves, and produces a profusion of creamy white
fragrant flowers in pendulous clusters, as shown in the annexed
engraving, for which we are indebted to Messrs Veitch of Chelsea, who
distributed the plant a few years ago. On several occasions Messrs
Veitch have exhibited it trained parasol fashion and covered
abundantly with elegant drooping clusters of flowers, and as such it
has been much admired. When planted out in a warmish greenhouse and
allowed to twine at will around an upright pillar, it is seen to the
best advantage, and, though not showy, makes a pleasing contrast with
other gayly tinted flowers. It is so unlike any other ornamental plant
in cultivation, that it ought to become more widely known than it
appears to be at present.--_The Garden._

       *       *       *       *       *




RAVAGES OF A RARE SCOLYTID BEETLE IN THE SUGAR MAPLES OF
NORTHEASTERN NEW YORK.


About the first of last August (1882) I noticed that a large
percentage of the undergrowth of the sugar maple (_Acer saccharinum_)
in Lewis County, Northeastern New York, seemed to be dying The leaves
drooped and withered, and finally shriveled and dried, but still clung
to the branches.

The majority of the plants affected were bushes a centimeter or two in
thickness, and averaging from one to two meters in height, though a
few exceeded these dimensions. On attempting to pull them up they
uniformly, and almost without exception, broke off at the level of the
ground, leaving the root undisturbed. A glance at the broken end
sufficed to reveal the mystery, for it was perforated, both vertically
and horizontally, by the tubular excavations of a little Scolytid
beetle which, in most instances, was found still engaged in his work
of destruction.

At this time the wood immediately above the part actually invaded by
the insect was still sound, but a couple of months later it was
generally found to be rotten. During September and October I dug up
and examined a large number of apparently healthy young maples of
about the size of those already mentioned, and was somewhat surprised
to discover that fully ten per cent. of them were infested with the
same beetles, though the excavations had not as yet been sufficiently
extensive to affect the outward appearance of the bush. They must all
die during the coming winter, and next spring will show that, in Lewis
County alone, hundreds of thousands of young sugar maples perished
from the ravages of this Scolytid during the summer of 1882.

Dr. George H Horn, of Philadelphia, to whom I sent specimens for
identification, writes me that the beetle is _Corthylus
punctatissimus_, Zim, and that nothing is known of its habits. I take
pleasure, therefore, in contributing the present account, meager as it
is, of its operations, and have illustrated it with a few rough
sketches that are all of the natural size, excepting those of the
insects themselves, which are magnified about nine diameters.

The hole which constitutes the entrance to the excavation is, without
exception, at or very near the surface of the ground, and is
invariably beneath the layer of dead and decaying leaves that
everywhere covers the soil in our Northern deciduous forests. Each
burrow consists of a primary, more or less horizontal, circular canal,
that passes completely around the bush, but does not perforate into
the entrance hole, for it generally takes a slightly spiral course, so
that when back to the starting point it falls either a little above,
or a little below it--commonly the latter (see Figs. 1 and 2).

[Illustration: FIGS. 1 and 2--Mines of Corthylus
punctatissimus.]

It follows the periphery so closely that the outer layer of growing
wood, separating it from the bark, does not average 0.25 mm. in
thickness, and yet I have never known it to cut entirely through this,
so as to lie in contact with the bark.

From this primary circular excavation issue, at right angles, and
generally in both directions (up and down), a varying number of
straight tubes, parallel to the axis of the plant (see Figs. 1, 2, and
3). They average five or six millimeters in length, and commonly
terminate blindly, a mature beetle being usually found in the end of
each. Sometimes, but rarely, one or more of those vertical excavations
is found to extend farther, and, bending at a right angle, to take a
turn around the circumference of the bush, thus constituting a second
horizontal circular canal from which, as from the primary one, a
varying number of short vertical tubes branch off. And in very
exceptional cases these excavations extend still deeper, and there may
be three, or even four, more or less complete circular canals. Such an
unusual state of things exists in the specimen from which Fig 3 is
taken.

[Illustration: FIGS. 3 and 4--Mines of Corthylus
punctatissimus.]

It will be seen that with few exceptions, the most important of which
is shown in Fig 4, all the excavations (including both the horizontal
canals and their vertical off shoots) are made in the sap-wood
immediately under the bark, and not in the hard and comparatively dry
central portion. This is, doubtless, because the outer layers of the
wood are softer and more juicy, and therefore more easily cut, besides
containing more nutriment and being, doubt less, better relished than
the drier interior.

This beetle does not bore, like some insects, but devours bodily all
the wood that is removed in making its burrows. The depth of each
vertical tube may be taken as an index to the length of time the
animal has been at work, and the number of these tubes generally tells
how many inhabit each bush, for as a general rule each individual
makes but one hole, and is commonly found at the bottom of it. All of
the excavations are black inside.

The beetle is sub-cylindric in outline, and very small, measuring but
3.5 mm in length. Its color is a dark chestnut brown, some specimens
being almost black. Its head is bent down under the thorax, and cannot
be seen from above (see Fig. 5).

[Illustration: FIG 5.--Corthylus punctatissimus.]

Should this species become abundant and widely dispersed, it could but
exercise a disastrous influence upon the maple forests of the
future--_G. Hart Merriam, M D, in American Naturalist._

       *       *       *       *       *




THE RED SPIDER.

(_Tetranyehus telarius._)


The red spider is not correctly speaking an insect, though it is
commonly spoken of as such, neither is it a spider, as its name would
imply, but an acarus or mite. Whether its name is correct or not, it
is a most destructive and troublesome pest wherever it makes its
presence felt, it by no means confines itself to one or only a few
kinds of plants, as many insects do, but it is very indiscriminate in
its choice of food, and it attacks both plants grown under glass and
those in the open air. When these pests are present in large numbers,
the leaves on which they feed soon present a sickly yellow or scorched
appearance, for the supply of sap is drawn off by myriads of these
little mites, which congregate on the under sides of the leaves, where
they live in a very delicate web, which they spin, and multiply very
rapidly; this web and the excrement of the red spider soon choke up
the pores of the leaves, which, deprived of their proper amount of
sap, and unable to procure the carbon from the atmosphere which they
so much need, are soon in a sorry plight. However promiscuous these
mites may be in their choice of food plants--melons, cucumbers, kidney
beans, hops, vines, apple, pear, plum, peach trees, limes, roses,
laurustinus, cactuses, clover, ferns, orchids, and various stove and
greenhouse plants being their particular favorites--they are by no
means insensible to the difference between dryness and moisture. To
the latter they have a most decided objection, and it is only in warm
and dry situations that they give much trouble, and it is nearly
always in dry seasons that plants, etc., out of doors suffer most from
these pests. Fruit trees grown against walls are particularly liable
to be attacked, since from their position the air round them is
generally warm and dry, and the cracks and boles in the walls are
favorite places for the red spider to shelter in, so that extra care
should be taken to prevent them from being infested, this may best be
effected by syringing the trees well night and morning with plain
water, directing the water particularly to the under sides of the
leaves, so as, if possible, to wash off the spiders and their webs. If
the trees be already attacked, adding soft soap and sulphur to the
water will destroy them.

[Illustration: FIG. 1--Red Spider (magnified). A 1. Ditto
(natural size). 2. Underside of head. 3. Foot. 4. Spinneret.]

Sulphur is one of the most efficient agents known for killing them,
but it will not, however, mix properly with water in its ordinary
form, but should be teated according to the following recipe:

Boil together in four gallons of water 1 lb. of flowers of sulphur and
2 lb. of fresh lime, and add 1½ lb. of soft soap, and, before using, 3
gallons more of water, or mix 4 oz of sulphate of lime with half that
weight of soft soap, and, when well mixed, add 1 gallon of hot water.
Use when cool enough to bear your hand in it. Any insecticide
containing sulphur is useful. The walls should be well washed with
some insecticide of this kind. Old walls in which the pointing is bad
and the bricks full of nail holes, etc., are very difficult to keep
free from red spider. They should be painted over with a strong
solution of soot water mixed with clay to form a paint. To a gallon of
this paint add 1 lb. of flowers of sulphur and 2 oz of soft soap.

This mixture should be thoroughly rubbed with a brush into every crack
and crevice of the walls, and if applied regularly every year would
probably prevent the trees from being badly attacked. As the red
spider passes the winter under some shelter, frequently choosing
stones, rubbish, etc., near the roots of the trees, keeping the ground
near the trees clean and well cultivated will tend greatly to diminish
their numbers. In vineries one of the best ways of destroying these
creatures is to paint the hot water pipes with one part of fresh lime
and two parts of flowers of sulphur mixed into a paint. If a flue is
painted in this way, great care should be taken that the sulphur does
not burn, or much damage may be done, as the flues may become much
hotter than hot water pipes. During the earlier stages of growth keep
the atmosphere moist and impregnated with ammonia by a layer of fresh
stable litter, or by painting the hot water pipes with guano made into
a paint, as long as the air in the house is kept moist there is not
much danger of a bad attack. As soon as the leaves are off, the canes
should be dressed with the recipe already given for painting the
walls, and two inches or so of the surface soil removed and replaced
with fresh and all the wood and iron work of the house well scrubbed.
If carnations are attacked, tying up some flowers of sulphur in a
muslin bag and sulphuring the plants liberally, and washing them well
in three days' time has been recommended.

Tobacco water and tobacco smoke will also kill these pests, but as
neither tobacco nor sulphuring the hot water pipes can always be
resorted to with safety in houses, by far the better way is to keep a
sharp look out for this pest, and as soon as a plant is found to be
attacked to at once clean it with an insecticide which it is known the
plant will bear, and by this means prevent other plants from being
infested. These little mites breed with astonishing rapidity, so that
great care should be exercised in at once stopping an attack. A lady
friend of mine had some castor oil plants growing in pots in a window
which were badly attacked, and found that some lady-birds soon made
short work of the mites and cleared the plants. The red spider lays
its eggs among the threads of the web which it weaves over the under
sides of the leaves; the eggs are round and white; the young spiders
are hatched in about a week, and they very much resemble their parents
in general appearance, but they have only three pairs of legs instead
of four at first, and they do not acquire the fourth pair until they
have changed their skins several times; they are, of course, much
smaller in size, but are, however, in proportion just as destructive
as the older ones. They obtain the juices of the leaves by eating
through the skin with their mandibles, and then thrusting in their
probosces or suckers (Fig. 2), through which they draw out the juices.
These little creatures are so transparent, that it is very difficult
to make out all the details of their mouths accurately. The females
are very fertile, and breed with great rapidity under favorable
circumstances all the year round.

The red spiders, as I have already stated, are not real spiders, but
belong to the family Acarina or mites, a family included in the same
class (the arachnida) as the true spiders, from which they may be
easily distinguished by the want of any apparent division between the
head and thorax and body; in the true spiders the head and thorax are
united together and form one piece, to which the body is joined by a
slender waist. The arachnidæ are followed by the myriapoda
(centipedes, etc.), and these by the insectiæ or true insects. The red
spiders belong to the kind of mites called spinning mites, to
distinguish them from those which do not form a web of any kind. It is
not quite certain at present whether there is only one or more species
of red spider; but this is immaterial to the horticulturist, as their
habits and the means for their destruction are the same. The red
spider (Tetranychus telarius--Fig. 1) is very minute, not measuring
more than the sixtieth of an inch in length when full grown; their
color is very variable, some individuals being nearly white, others
greenish, or various shades of orange, and red. This variation in
color probably depends somewhat on their age or food--the red ones are
generally supposed to be the most mature. The head is furnished with a
pair of pointed mandibles, between which is a pointed beak or sucker
(Fig. 2). The legs are eight in number; the two front pairs project
forward and the other two backward; they are covered with long stiff
hairs; the extremities of the feet are provided with long bent hairs,
which are each terminated by a knob. The legs and feet appear to be
only used in drawing out the threads and weaving the web. The thread
is secreted by a nipple or spinneret (Fig. 4) situated near the apex
of the body on the under side. The upper surface of the body is
sparingly covered with long stiff hairs.--_G.S.S., in The Garden._

       *       *       *       *       *




THE HELODERMA HORRIDUM.


The discussion of the curious lizard found in our Western Territories
and in Mexico, and variously known as the "Montana alligator," "the
Gila monster," and "the Mexican heloderma," is becoming decidedly
interesting.

As noted in a recent issue of the SCIENTIFIC AMERICAN, a live specimen
was sent last summer to Sir John Lubbock, and by him presented to the
London Zoological Gardens. At first it was handled as any other lizard
would be, without special fear of its bite, although its mouth is well
armed with teeth. Subsequent investigation has convinced its keepers
that the creature is not a fit subject for careless handling; that its
native reputation is justified by fact; and that it is an exception
to all known lizards, in that its teeth are poison fangs comparable
with those of venomous serpents.

Speaking of the Mexican reputation of the lizard, in a recent issue of
_Knowledge_, Dr. Andrew Wilson, whose opinion will be respected by all
naturalists, says that "without direct evidence of such a statement no
man of science, basing his knowledge of lizard nature on the exact
knowledge to hand, would have hesitated in rejecting the story as, at
least, improbable. Yet it is clear that the stories of the New World
may have had an actual basis of fact; for the _Heloderma horridum_ has
been, beyond doubt, proved to be poisonous in as high a degree as a
cobra or a rattlesnake.

"At first the lizard was freely handled by those in charge at Regent's
Park, and being a lizard, was regarded as harmless. It was certainly
dull and inactive, a result probably due to its long voyage and to the
want of food. Thanks, however, to the examination of Dr. Gunther, of
the British Museum, and to actual experiment, we now know that
_Heloderma_ will require in future to be classed among the deadly
enemies of other animals. Examining its mouth, Dr. Gunther found that
its teeth formed a literal series of poison fangs. Each tooth,
apparently, possesses a poison gland; and lizards, it may be added,
are plentifully supplied with these organs as a rule. Experimenting
upon the virulence of the poison, _Heloderma_ was made to bite a frog
and a guinea pig. The frog died in one minute, and the guinea-pig in
three. The virus required to produce these effects must be of
singularly acute and powerful nature. It is to be hoped that no case
of human misadventure at the teeth of _Heloderma_ may happen. There
can be no question, judging from the analogy of serpent-bite, that the
poison of the lizard would affect man."

[Illustration: HELODERMA HORRIDUM, OR GILA MONSTER]

In an article in the London _Field_, Mr. W.B. Tegetmeier states that
this remarkable lizard was first described in the _Isis_, in 1829, by
the German naturalist Wiegmann, who gave it the name it bears, and
noted the ophidian character of its teeth.

In the _Comptes Rendus_ of 1875, M.F. Sumichrast gave a much more
detailed account of the habits and mode of life of this animal, and
forwarded specimens in alcohol to Paris, where they were dissected and
carefully described. The results of these investigations have been
published in the third part of the "Mission Scientifique an Mexique,"
which, being devoted to reptiles, has been edited by Messrs. Aug.
Dumeril and Becourt.

The heloderm, according to M.F. Sumichrast, inhabits the hot zone of
Mexico--that intervening between the high mountains and the Pacific in
the districts bordering the Gulf of Tehuantepec. It is found only
where the climate is dry and hot; and on the moister eastern slopes of
the mountain chain that receive the damp winds from the Gulf of Mexico
it is entirely unknown. Of its habits but little is known, as it
appears to be, like many lizards, nocturnal, or seminocturnal, in its
movements, and, moreover, it is viewed with extreme dread by the
natives, who regard it as equally poisonous with the most venomous
serpents. It is obviously, however, a terrestrial animal, as it has
not a swimming tail flattened from side to side, nor the climbing feet
that so characteristically mark arboreal lizards. Sumichrast further
states that the animal has a strong nauseous smell, and that when
irritated it secretes a large quantity of gluey saliva. In order to
test its supposed poisonous property, he caused a young one to bite a
pullet under the wing. In a few minutes the adjacent parts became
violet in color, convulsions ensued, from which the bird partially
recovered, but it died at the expiration of twelve hours. A large cat
was also caused to be bitten in the foot by the same heloderm; it was
not killed, but the limb became swollen, and the cat continued
mewing for several hours, as if in extreme pain. The dead specimens
sent to Europe have been carefully examined as to the character of the
teeth. Sections of these have been made, which demonstrate the
existence of a canal in each, totally distinct from and anterior to
the pulp cavity; but the soft parts had not been examined with
sufficient care to determine the existence or non-existence of any
poison gland in immediate connection with these perforated teeth until
Dr. Gunther's observations were made, as described by Dr. Wilson.

Hitherto, as noted in a previous article, American naturalists have
regarded the heloderm as quite harmless--an opinion well sustained by
the judgment of many persons in Arizona and other parts of the West by
whom the reptile has been kept as an interesting though ugly pet.
While the Indians and native Mexicans believe the creature to be
venomous, we have never heard an instance in which the bite of it has
proved fatal.

A correspondent of the SCIENTIFIC AMERICAN, "C.E.J.," writing from
Salt Lake City, Utah, under date of September 8, says, after referring
to the article on the heloderm in our issue of August 26:

  "Having resided in the southern part of this Territory for
  seventeen years, where the mercury often reaches 110° or more in
  the shade, and handled a number of these 'monsters,' I can say
  that I never yet knew anybody or anything to have perished from
  their bite. We have often had two or three of them tied in the
  door-yard by a hind leg, and the children have freely played
  around them--picking them up by the nape of the neck and watching
  them snap off a small bit from the end of a stick when poked at
  them. We have fed them raw egg and milk; the latter they take with
  great relish. At one time a small canine came too near the mouth
  of our alligator (_mountain alligator_, we call them), when it
  instantly caught the pup by the under jaw and held on as only it
  could (they have a powerful jaw), nor would it release its hold
  until choked near to death, which was done by taking it behind the
  bony framework of the head, between the thumb and finger, and
  pressing hard. The pup did considerable howling for half an hour,
  by which time the jaw was much swollen, remaining so for two or
  three days, after which it was all right again. By this I could
  only conclude that the animal was but slightly poisonous. I never
  knew of a human being having been bitten by one. My sister kept
  one about the house for several weeks, and fed it from her hands
  and with a spoon. The specimens have generally been sent (through
  the Deseret Museum) to colleges and museums in the East.

  "The Indians have a great fear that these animals produce at will
  good or bad weather, and will not molest them. Many times they
  have come to see them, and told us that we should let them go or
  they would talk to the storm spirit and send wind and water and
  fire upon us. An old Indian I once talked with told me of another
  who was bitten on the hand, and said it swelled up the arm badly,
  but he recovered. From some reason we never find specimens less
  than 12 or 14 inches long, I never saw a young one. There is a
  nice stuffed specimen, 18 inches long, in our museum here."

Sir John Lubbock's specimen, shown in the engraving herewith, for
which we are indebted to the London _Field_, is about 19 inches in
length. Its general color is a creamy buff, with dark brown markings.
The forepart of the head and muzzle is entirely dark, the upper eyelid
being indicated by a light stripe. The entire body is covered with
circular warts. It is fed upon eggs, which it eats greedily.

It would be interesting to know whether the northern specimens, if
venomous at all, are as fully equipped with poison bags and fangs as
Dr. Gunther finds the Mexican specimen to be. Some of our Western or
Mexican readers may be able to make comparative tests. Meantime it
would be prudent to limit the use of the "monster" as a children's
pet.

The foregoing appeared in the SCIENTIFIC AMERICAN of Oct. 7, 1882.

We are now indebted to a correspondent, Mr. Wm. Y. Beach, of the Grand
View Mine, Grant County, Southern Arizona, for a fine specimen of this
singular reptile, just received alive. The example sent to us is about
twenty inches long, and answers very well to the description of the
monster and the engraving above given.

In the course of an hour after opening the box in which the reptile
had been confined during its eight days' journey by rail, it became
very much at home, stretching and crawling about our office floor with
much apparent satisfaction.

Our correspondent is located in the mountains, some nine miles distant
from the Gila River. He states that the reptile he sends was found in
one of the shops pertaining to the mine, which had been left
unoccupied for a week or so.

Apropos to the foregoing, we have received the following letter from
another correspondent in Arizona:

_To the Editor of the Scientific American:_

  My attention has been called to an article in your issue of Oct.
  7, 1882, relating to the _Heloderma horridum_, or commonly known
  as the Gila Monster.

  During a residence of ten years in Arizona I have had many
  opportunities of learning the habits of these reptiles, and I am
  satisfied their bite will produce serious effects, if not death,
  of the human race. I know of one instance where a gentleman of my
  acquaintance by the name of Bostick, at the Tiga Top mining camp,
  in Arizona, was bitten on the fingers, and suffered all the
  symptoms of poison from snake bite. He was confined to his bed for
  six weeks and subsequently died. I am of the opinion his death was
  in part caused by the effects of the poison of the Gila Monster.

  The Hualzar Indians are very much afraid of them, and one I showed
  the picture to of the Monster in your paper remarked, "Chinamuck,"
  which in Hualzar language means "very bad." He said if an Indian
  is bitten, he sometimes dies.

  I have seen them nearly two feet in length. Never, to my
  knowledge, are they kept as pets in our portion of Arizona. They
  live on mice and other small animals, and when aggravated can jump
  several times their length.

                                                      W.E. DAY, M.D.

  Huckberry, Mahone Co., Ar. T., April, 1883.

       *       *       *       *       *




THE KANGAROO.


_To the Editor of the Scientific American:_

In page 69 of your issue of 3d of February, 1883, I notice among the
"Challenger Notes" of Professor Mosely the statement that "Among
stockmen, and even some well educated people in Australia, there is a
conviction that the young kangaroo grows out as a sort of bud on the
teat of the mother within the pouch." Some eighteen months ago I
noticed a paragraph wherein some learned professor was reported to
have set at rest the contested point as to whether the kangaroo come
into being in the same manner as the calves of the cow and other
mammals, or whether the young grows, as alleged, upon the teat of its
dam within the pouch. The learned professor in question asserted that
it did not so grow upon the teat; but, with all due respect to the
professor's claim to credibility on other matters, I must in this
instance take the liberty of stating that he is in error. The young
kangaroo actually oozes out, if I may use such an expression, from the
teat. Strange as the statement may seem, it is a fact that the first
indication of life on the part of the kangaroo offspring is a very
slight eruption, in size not larger than an ordinary pin head. This
growth gradually resolves itself into the form of the marsupial, and
is not detached until close upon the expiring of of the fourth month.
It is carried by the mother during that period, and thenceforth exists
partially at least on herbage. Indeed, from the fourth till the
seventh month it is almost constantly in the pouch, only coming out
occasionally toward the close of evening to crop the grass. I had at
one time in my possession a specimen of the kangaroo germ which I cut
from off the teat, complete in form, whose entire weight was less than
an ounce; and, at the same time, I had a kangaroo in my possession
which measured seven feet six inches from the top of the ears to the
extremity of the tail.

Your readers would doubtless feel interested with a few particulars as
to my life among the kangaroos in a genuine kangaroo country. I have
read somewhere about the exceeding beauty of the eyes of the gazelle;
how noted hunters have alleged that their nature so softened on
looking into the animal's eyes that they (the hunters) had no heart to
destroy the creature. Now, I have never seen a gazelle, and so cannot
indulge in comparisons; but if their eyes are more beautiful than
those of a middle-aged kangaroo, they may indeed be all that huntsmen
say of them. With respect to the old kangaroos, their eyes and face
are simply atrocious in their repulsive ugliness.

Nothing in nature could surpass the affection which the female
kangaroo manifests for her young. There is something absolutely
touching in the anxious solicitude displayed by the dam while the
young ones are at play. On the least alarm the youngster instantly
ensconces himself in the pouch of his gentle mother, and should he, in
the exuberance of his joy, thrust his head out from his place of
refuge, it is instantly thrust back by his dam. I have, on several
occasions, by hard riding, pressed a doe to dire extremity, and it has
only been when hope had entirely forsaken her, or when her capture was
inevitable, that she has reluctantly thrown out the fawn. Their method
of warfare has often reminded me of the style of two practiced
pugilists, the aim of each being to firmly gripe his opponent by the
shoulder, upon accomplishing which, the long hind leg, with its horny
blade projecting from its toe, comes into formidable play. It is
lifted and drawn downward with a rapid movement, and one or other of
the combatants soon shows the entrails laid bare, which is usually the
_grand finale_. The sparring that takes place between the marsupials
while trying to get the advantageous gripe is marvelous--I had almost
said scientific; for the style and rapidity of the animals' movements
might excite the admiration of the Tipton Slasher.

Strangely enough, these animals have their social distinctions almost
as well defined as in the case of the human species. Thus, one herd
will not, on any consideration, associate with another; each tribe has
its rendezvous for morning and evening reunions, and each its leader
or king, who is the first to raise an alarm on the approach of danger,
and the first to lead the way, whether in ignominious retreat,
confronting a recognized foe, or standing at bay. These leaders are
generally extremely cunning, one old stager with whom I was intimately
acquainted having baffled all attempts to effect its capture for more
than ten months. I got him at last by a stratagem. He had a knack of
always keeping near a flock of sheep, and on the approach of the dogs
dodged among them.

By this means he had always succeeded in effecting his escape, and
more than that, this noble savage had actually drowned several of our
best dogs, for, if at any time a dog came upon him at a distance from
the sheep flocks, he would make for a neighboring swamp, on nearing
which he has been known to turn round upon the pursuing dog, seize
him, and carry him for some distance right into the swamp, and then
thrust the dog's head under water, holding him there till he was
drowned. It was amusing to see how some of our old knowing warrior
dogs gave him best when they noticed that he was approaching a flock
of sheep, well remembering, from former experience, that it was of no
use trying to get him on that occasion, and that when near the water
the attempt at his capture was both dangerous and impracticable.

If you take a new and inexperienced dog into your hunt after an old
man, he invariably gets his throat ripped up, or is otherwise
maltreated until well used to the sport. After a dog has had one
season's experience he becomes a warrior, and it is a wonderfully
clever kangaroo that can scratch him after he has attained that
position. The young recruit, if we may so speak of a dog who has never
had any practice, is over-impetuous, rushing into the treacherous
embraces of the close hugger somewhat unadvisedly, and is fortunate if
he escapes with his life as a penalty for his rashness. The dog of
experience always gripes his marsupial adversary by the butt end of
the tail, close to the rump, or at its juncture with the spinal
vertebræ. Once the dog has thrown his kangaroo, he makes for the
throat, which he gripes firmly, while at the same time he is careful
to keep his own body as far as he conveniently can from the quarry's
dangerous hind quarters. In this position dog and kangaroo work round
and round for some time until one or the other of the combatants is
exhausted. It is noteworthy that the kangaroo will only make use of
its sharp teeth in cases of the direst extremity. On such occasions,
however, it must be conceded that the bite is one of a most formidable
character--one not to be any means underrated or despised.

Should those few incidents prove of sufficient interest in your
estimation, I may state that I shall willingly, at some future time,
forward you particulars of the "ways peculiar" of the emirs,
bandicoots, wombats, opossums, and other remarkable animals, the
observance of which formed almost my sole amusement during a rather
lengthy sojourn in the bush of South Australia.

SEPTIMUS FREARSON.

Adelaide, S.A., April, 1883.

       *       *       *       *       *




JAPANESE PEPPERMINT.


In more than one periodical the botanical name of this plant has been
given as Mentha arvensis, var. purpurascens. It will be well,
therefore, to point out that this is an error before the statement is
further copied and the mistake perpetuated. The plant has green
foliage, with not a trace of purple, and less deserves the name
purpurascens than the true peppermint (Mentha piperita), of which a
purplish leaved form is well known. The mistake probably arose in the
first place in a printer's error. The history is as follows:

For some years past a large quantity of a substance called menthol has
been imported into this country, and extensively used as a topical
application for the relief of neuralgia, and in some instances as an
antiseptic. This substance in appearance closely resembles Epsom
salts, and consists of crystals deposited in the oil of peppermint
distilled from the Japanese peppermint plant. This oil, when separated
from the crystals, is now largely used to flavor cheap peppermint
lozenges, being less expensive than the English oil. The crystals
deposit naturally in the oil upon keeping, but the Japanese extract
the whole of it by submitting the oil several times in succession to a
low temperature, when all the menthol crystallizes out from the oil
and falls to the bottom of the vessel. The source of the Japanese
peppermint oil has been stated to be Mentha arvensis, var. javanica.
On examining several specimens of this plant in our national herbaria
I found that the leaves tasted like those of the common garden mint
(Mentha viridis), and not at all like peppermint, and that therefore
the oil and menthol could not possibly be derived from this plant.

I then asked my friend, Mr. T. Christy, who takes great interest in
medicinal plants, to endeavor to get specimens from Japan of the plant
yielding the oil. After many vain attempts, he at last succeeded in
obtaining live plants. These were cultivated in his garden at Malvern
House, Sydenham, and when they flowered I examined the plant and found
that it differed from other forms of M. arvensis in the taste, in the
acuminate segments of the calyx of the flower, and in the longer leaf
stalks; the leaves also taper more toward the base. Dr. Franchet, the
greatest living authority on Japanese plants, to whom I sent
specimens, confirmed my opinion as to the variety deserving a special
name, and M. Malinvaud, a well known authority on mints, suggested the
name piperascens, which I adopted, calling the plant Mentha arvensis,
var. piperascens. Specimens of the plant kindly lent by Mr. Christy
for the purpose were exhibited by me at an evening meeting of the
Linnæan Society, and by a printer's error in the report of the remarks
then made, the name of the plant appeared in print as Mentha arvensis,
var. purpurascens.

I trust that the present note, through the medium of _The Garden_,
will prevent the perpetuation of this error. This is the more
important, as I hope that the plant will come into cultivation in this
country. It is a robust plant of rapid growth, as easily cultivated as
the English peppermint, and seems to require less moisture, and is
therefore capable of cultivation in a great variety of localities. The
increasing demand for menthol, which can only be procured in small
quantities from the English peppermint, and the high price of English
peppermint oil, lead to the hope that instead of importing menthol
from Japan, it will be prepared in this country from the Japanese
plant.

With the appliances of more advanced civilization, it ought to be
possible for the oil and menthol to be made in this country at less
price than the Japanese products now cost.

At the present time large quantities of cheap peppermint oil are
imported into this country from the United States, and Chinese oil is
imported into Bombay for use in the Government medical stores. There
is no reason why this should be the case if the Japanese plant were
cultivated in this country. In Ireland, where labor is cheap and the
climate moist, this crop might afford a valuable source of income to
enterprising cultivators. It may be interesting to note here that the
plant used in China closely resembles the Japanese one, differing
chiefly in the narrower and more glabrous leaves. I have therefore
named it Mentha arvensis f. glabrata, from specimens sent to me from
Hong Kong, by Mr. C. Ford, the director of the Botanic Gardens there.

E.M. HOLMES.

       *       *       *       *       *




GLADIOLUS.


The gladiolus is easily raised from seeds, which should be sown in
early spring in pots of rich soil placed in heat, the pots being kept
near the glass after they begin to grow, and the plants being
gradually hardened to permit their being placed out of doors in a
sheltered spot for the summer. In October they will have ripened off,
and must be taken out of the soil and stored in paper bags in a dry
room secure from frost. They will have made little bulbs, from the
size of a hazel nut downward, according to their vigor. In the
subsequent spring they should be planted like the old bulbs, and the
larger ones will flower during the season, while the smaller specimens
must be again harvested and planted out as above described.

       *       *       *       *       *


A catalogue containing brief notices of many important scientific
papers heretofore published in the SUPPLEMENT, may be had gratis at
this office.

       *       *       *       *       *


The

Scientific American Supplement.

PUBLISHED WEEKLY.

      Terms of Subscription, $5 a Year.

Sent by mail, postage prepaid, to subscribers in any part of the
United States or Canada. Six dollars a year, sent, prepaid, to any
foreign country.

       *       *       *       *       *

All the back numbers of THE SUPPLEMENT, from the commencement, January
I, 1876, can be had. Price, 10 cents each.

       *       *       *       *       *

All the back volumes of THE SUPPLEMENT can likewise be supplied. Two
volumes are issued yearly. Price of each volume, $2.50, stitched in
paper, or $3.50, bound in stiff covers.

       *       *       *       *       *

COMBINED RATES--One copy of SCIENTIFIC AMERICAN and one copy of
SCIENTIFIC AMERICAN SUPPLEMENT, one year, postpaid, $7.00.

A liberal discount to booksellers, news agents, and canvassers.

            MUNN & CO., PUBLISHERS,
          261 BROADWAY, NEW YORK, N.Y.

       *       *       *       *       *


PATENTS.

In connection with the SCIENTIFIC AMERICAN, Messrs MUNN & Co. are
Solicitors of American and Foreign Patents, have had 38 years'
experience, and now have the largest establishment in the world.
Patents are obtained on the best terms.

A special notice is made in the SCIENTIFIC AMERICAN of all
Inventions patented through this Agency, with the name and residence
of the Patentee. By the immense circulation thus given, public
attention is directed to the merits of the new patent, and sales or
introduction often easily effected.

Any person who has made a new discovery or invention can ascertain,
free of charge, whether a patent can probably be obtained, by writing
to MUNN & CO.

We also send free our Hand Book about the Patent Laws, Patents,
Caveats, Trade Marks, their costs, and how procured. Address

      MUNN & CO.. 261 BROADWAY, NEW YORK.
 Branch Office, cor. F and 7th Sts., Washington, D.C.







*** END OF THE PROJECT GUTENBERG EBOOK SCIENTIFIC AMERICAN SUPPLEMENT, NO. 388, JUNE 9, 1883 ***


    

Updated editions will replace the previous one—the old editions will
be renamed.

Creating the works from print editions not protected by U.S. copyright
law means that no one owns a United States copyright in these works,
so the Foundation (and you!) can copy and distribute it in the United
States without permission and without paying copyright
royalties. Special rules, set forth in the General Terms of Use part
of this license, apply to copying and distributing Project
Gutenberg™ electronic works to protect the PROJECT GUTENBERG™
concept and trademark. Project Gutenberg is a registered trademark,
and may not be used if you charge for an eBook, except by following
the terms of the trademark license, including paying royalties for use
of the Project Gutenberg trademark. If you do not charge anything for
copies of this eBook, complying with the trademark license is very
easy. You may use this eBook for nearly any purpose such as creation
of derivative works, reports, performances and research. Project
Gutenberg eBooks may be modified and printed and given away—you may
do practically ANYTHING in the United States with eBooks not protected
by U.S. copyright law. Redistribution is subject to the trademark
license, especially commercial redistribution.


START: FULL LICENSE

THE FULL PROJECT GUTENBERG LICENSE

PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK

To protect the Project Gutenberg™ mission of promoting the free
distribution of electronic works, by using or distributing this work
(or any other work associated in any way with the phrase “Project
Gutenberg”), you agree to comply with all the terms of the Full
Project Gutenberg™ License available with this file or online at
www.gutenberg.org/license.

Section 1. General Terms of Use and Redistributing Project Gutenberg™
electronic works

1.A. By reading or using any part of this Project Gutenberg™
electronic work, you indicate that you have read, understand, agree to
and accept all the terms of this license and intellectual property
(trademark/copyright) agreement. If you do not agree to abide by all
the terms of this agreement, you must cease using and return or
destroy all copies of Project Gutenberg™ electronic works in your
possession. If you paid a fee for obtaining a copy of or access to a
Project Gutenberg™ electronic work and you do not agree to be bound
by the terms of this agreement, you may obtain a refund from the person
or entity to whom you paid the fee as set forth in paragraph 1.E.8.

1.B. “Project Gutenberg” is a registered trademark. It may only be
used on or associated in any way with an electronic work by people who
agree to be bound by the terms of this agreement. There are a few
things that you can do with most Project Gutenberg™ electronic works
even without complying with the full terms of this agreement. See
paragraph 1.C below. There are a lot of things you can do with Project
Gutenberg™ electronic works if you follow the terms of this
agreement and help preserve free future access to Project Gutenberg™
electronic works. See paragraph 1.E below.

1.C. The Project Gutenberg Literary Archive Foundation (“the
Foundation” or PGLAF), owns a compilation copyright in the collection
of Project Gutenberg™ electronic works. Nearly all the individual
works in the collection are in the public domain in the United
States. If an individual work is unprotected by copyright law in the
United States and you are located in the United States, we do not
claim a right to prevent you from copying, distributing, performing,
displaying or creating derivative works based on the work as long as
all references to Project Gutenberg are removed. Of course, we hope
that you will support the Project Gutenberg™ mission of promoting
free access to electronic works by freely sharing Project Gutenberg™
works in compliance with the terms of this agreement for keeping the
Project Gutenberg™ name associated with the work. You can easily
comply with the terms of this agreement by keeping this work in the
same format with its attached full Project Gutenberg™ License when
you share it without charge with others.

1.D. The copyright laws of the place where you are located also govern
what you can do with this work. Copyright laws in most countries are
in a constant state of change. If you are outside the United States,
check the laws of your country in addition to the terms of this
agreement before downloading, copying, displaying, performing,
distributing or creating derivative works based on this work or any
other Project Gutenberg™ work. The Foundation makes no
representations concerning the copyright status of any work in any
country other than the United States.

1.E. Unless you have removed all references to Project Gutenberg:

1.E.1. The following sentence, with active links to, or other
immediate access to, the full Project Gutenberg™ License must appear
prominently whenever any copy of a Project Gutenberg™ work (any work
on which the phrase “Project Gutenberg” appears, or with which the
phrase “Project Gutenberg” is associated) is accessed, displayed,
performed, viewed, copied or distributed:

    This eBook is for the use of anyone anywhere in the United States and most
    other parts of the world at no cost and with almost no restrictions
    whatsoever. You may copy it, give it away or re-use it under the terms
    of the Project Gutenberg License included with this eBook or online
    at www.gutenberg.org. If you
    are not located in the United States, you will have to check the laws
    of the country where you are located before using this eBook.
  
1.E.2. If an individual Project Gutenberg™ electronic work is
derived from texts not protected by U.S. copyright law (does not
contain a notice indicating that it is posted with permission of the
copyright holder), the work can be copied and distributed to anyone in
the United States without paying any fees or charges. If you are
redistributing or providing access to a work with the phrase “Project
Gutenberg” associated with or appearing on the work, you must comply
either with the requirements of paragraphs 1.E.1 through 1.E.7 or
obtain permission for the use of the work and the Project Gutenberg™
trademark as set forth in paragraphs 1.E.8 or 1.E.9.

1.E.3. If an individual Project Gutenberg™ electronic work is posted
with the permission of the copyright holder, your use and distribution
must comply with both paragraphs 1.E.1 through 1.E.7 and any
additional terms imposed by the copyright holder. Additional terms
will be linked to the Project Gutenberg™ License for all works
posted with the permission of the copyright holder found at the
beginning of this work.

1.E.4. Do not unlink or detach or remove the full Project Gutenberg™
License terms from this work, or any files containing a part of this
work or any other work associated with Project Gutenberg™.

1.E.5. Do not copy, display, perform, distribute or redistribute this
electronic work, or any part of this electronic work, without
prominently displaying the sentence set forth in paragraph 1.E.1 with
active links or immediate access to the full terms of the Project
Gutenberg™ License.

1.E.6. You may convert to and distribute this work in any binary,
compressed, marked up, nonproprietary or proprietary form, including
any word processing or hypertext form. However, if you provide access
to or distribute copies of a Project Gutenberg™ work in a format
other than “Plain Vanilla ASCII” or other format used in the official
version posted on the official Project Gutenberg™ website
(www.gutenberg.org), you must, at no additional cost, fee or expense
to the user, provide a copy, a means of exporting a copy, or a means
of obtaining a copy upon request, of the work in its original “Plain
Vanilla ASCII” or other form. Any alternate format must include the
full Project Gutenberg™ License as specified in paragraph 1.E.1.

1.E.7. Do not charge a fee for access to, viewing, displaying,
performing, copying or distributing any Project Gutenberg™ works
unless you comply with paragraph 1.E.8 or 1.E.9.

1.E.8. You may charge a reasonable fee for copies of or providing
access to or distributing Project Gutenberg™ electronic works
provided that:

    • You pay a royalty fee of 20% of the gross profits you derive from
        the use of Project Gutenberg™ works calculated using the method
        you already use to calculate your applicable taxes. The fee is owed
        to the owner of the Project Gutenberg™ trademark, but he has
        agreed to donate royalties under this paragraph to the Project
        Gutenberg Literary Archive Foundation. Royalty payments must be paid
        within 60 days following each date on which you prepare (or are
        legally required to prepare) your periodic tax returns. Royalty
        payments should be clearly marked as such and sent to the Project
        Gutenberg Literary Archive Foundation at the address specified in
        Section 4, “Information about donations to the Project Gutenberg
        Literary Archive Foundation.”
    
    • You provide a full refund of any money paid by a user who notifies
        you in writing (or by e-mail) within 30 days of receipt that s/he
        does not agree to the terms of the full Project Gutenberg™
        License. You must require such a user to return or destroy all
        copies of the works possessed in a physical medium and discontinue
        all use of and all access to other copies of Project Gutenberg™
        works.
    
    • You provide, in accordance with paragraph 1.F.3, a full refund of
        any money paid for a work or a replacement copy, if a defect in the
        electronic work is discovered and reported to you within 90 days of
        receipt of the work.
    
    • You comply with all other terms of this agreement for free
        distribution of Project Gutenberg™ works.
    

1.E.9. If you wish to charge a fee or distribute a Project
Gutenberg™ electronic work or group of works on different terms than
are set forth in this agreement, you must obtain permission in writing
from the Project Gutenberg Literary Archive Foundation, the manager of
the Project Gutenberg™ trademark. Contact the Foundation as set
forth in Section 3 below.

1.F.

1.F.1. Project Gutenberg volunteers and employees expend considerable
effort to identify, do copyright research on, transcribe and proofread
works not protected by U.S. copyright law in creating the Project
Gutenberg™ collection. Despite these efforts, Project Gutenberg™
electronic works, and the medium on which they may be stored, may
contain “Defects,” such as, but not limited to, incomplete, inaccurate
or corrupt data, transcription errors, a copyright or other
intellectual property infringement, a defective or damaged disk or
other medium, a computer virus, or computer codes that damage or
cannot be read by your equipment.

1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the “Right
of Replacement or Refund” described in paragraph 1.F.3, the Project
Gutenberg Literary Archive Foundation, the owner of the Project
Gutenberg™ trademark, and any other party distributing a Project
Gutenberg™ electronic work under this agreement, disclaim all
liability to you for damages, costs and expenses, including legal
fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT
LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE
PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE
TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE
LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR
INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH
DAMAGE.

1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a
defect in this electronic work within 90 days of receiving it, you can
receive a refund of the money (if any) you paid for it by sending a
written explanation to the person you received the work from. If you
received the work on a physical medium, you must return the medium
with your written explanation. The person or entity that provided you
with the defective work may elect to provide a replacement copy in
lieu of a refund. If you received the work electronically, the person
or entity providing it to you may choose to give you a second
opportunity to receive the work electronically in lieu of a refund. If
the second copy is also defective, you may demand a refund in writing
without further opportunities to fix the problem.

1.F.4. Except for the limited right of replacement or refund set forth
in paragraph 1.F.3, this work is provided to you ‘AS-IS’, WITH NO
OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE.

1.F.5. Some states do not allow disclaimers of certain implied
warranties or the exclusion or limitation of certain types of
damages. If any disclaimer or limitation set forth in this agreement
violates the law of the state applicable to this agreement, the
agreement shall be interpreted to make the maximum disclaimer or
limitation permitted by the applicable state law. The invalidity or
unenforceability of any provision of this agreement shall not void the
remaining provisions.

1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the
trademark owner, any agent or employee of the Foundation, anyone
providing copies of Project Gutenberg™ electronic works in
accordance with this agreement, and any volunteers associated with the
production, promotion and distribution of Project Gutenberg™
electronic works, harmless from all liability, costs and expenses,
including legal fees, that arise directly or indirectly from any of
the following which you do or cause to occur: (a) distribution of this
or any Project Gutenberg™ work, (b) alteration, modification, or
additions or deletions to any Project Gutenberg™ work, and (c) any
Defect you cause.

Section 2. Information about the Mission of Project Gutenberg™

Project Gutenberg™ is synonymous with the free distribution of
electronic works in formats readable by the widest variety of
computers including obsolete, old, middle-aged and new computers. It
exists because of the efforts of hundreds of volunteers and donations
from people in all walks of life.

Volunteers and financial support to provide volunteers with the
assistance they need are critical to reaching Project Gutenberg™’s
goals and ensuring that the Project Gutenberg™ collection will
remain freely available for generations to come. In 2001, the Project
Gutenberg Literary Archive Foundation was created to provide a secure
and permanent future for Project Gutenberg™ and future
generations. To learn more about the Project Gutenberg Literary
Archive Foundation and how your efforts and donations can help, see
Sections 3 and 4 and the Foundation information page at www.gutenberg.org.

Section 3. Information about the Project Gutenberg Literary Archive Foundation

The Project Gutenberg Literary Archive Foundation is a non-profit
501(c)(3) educational corporation organized under the laws of the
state of Mississippi and granted tax exempt status by the Internal
Revenue Service. The Foundation’s EIN or federal tax identification
number is 64-6221541. Contributions to the Project Gutenberg Literary
Archive Foundation are tax deductible to the full extent permitted by
U.S. federal laws and your state’s laws.

The Foundation’s business office is located at 809 North 1500 West,
Salt Lake City, UT 84116, (801) 596-1887. Email contact links and up
to date contact information can be found at the Foundation’s website
and official page at www.gutenberg.org/contact

Section 4. Information about Donations to the Project Gutenberg
Literary Archive Foundation

Project Gutenberg™ depends upon and cannot survive without widespread
public support and donations to carry out its mission of
increasing the number of public domain and licensed works that can be
freely distributed in machine-readable form accessible by the widest
array of equipment including outdated equipment. Many small donations
($1 to $5,000) are particularly important to maintaining tax exempt
status with the IRS.

The Foundation is committed to complying with the laws regulating
charities and charitable donations in all 50 states of the United
States. Compliance requirements are not uniform and it takes a
considerable effort, much paperwork and many fees to meet and keep up
with these requirements. We do not solicit donations in locations
where we have not received written confirmation of compliance. To SEND
DONATIONS or determine the status of compliance for any particular state
visit www.gutenberg.org/donate.

While we cannot and do not solicit contributions from states where we
have not met the solicitation requirements, we know of no prohibition
against accepting unsolicited donations from donors in such states who
approach us with offers to donate.

International donations are gratefully accepted, but we cannot make
any statements concerning tax treatment of donations received from
outside the United States. U.S. laws alone swamp our small staff.

Please check the Project Gutenberg web pages for current donation
methods and addresses. Donations are accepted in a number of other
ways including checks, online payments and credit card donations. To
donate, please visit: www.gutenberg.org/donate.

Section 5. General Information About Project Gutenberg™ electronic works

Professor Michael S. Hart was the originator of the Project
Gutenberg™ concept of a library of electronic works that could be
freely shared with anyone. For forty years, he produced and
distributed Project Gutenberg™ eBooks with only a loose network of
volunteer support.

Project Gutenberg™ eBooks are often created from several printed
editions, all of which are confirmed as not protected by copyright in
the U.S. unless a copyright notice is included. Thus, we do not
necessarily keep eBooks in compliance with any particular paper
edition.

Most people start at our website which has the main PG search
facility: www.gutenberg.org.

This website includes information about Project Gutenberg™,
including how to make donations to the Project Gutenberg Literary
Archive Foundation, how to help produce our new eBooks, and how to
subscribe to our email newsletter to hear about new eBooks.