Book No. 173: Old and New Favorites

From every State in the Union, you have sent us letters asking for these designs. You asked for them, and here they are ... designs that have made crochet history. Taken from our pattern books published over a period of years, we present your special favorites in this one book.

In these pages you will find Star Wheel , Queen Anne’s Lace , Wheel of Fortune ... lacy motifs, popcorn and filet patterns, cameo crochet ... designs that have earned a place of honor in the American home.

Give these designs the heirloom quality they deserve. Make them with Clark’s O.N.T. and J. & P. Coats Boilfast [1] threads ... the threads that have a century-old reputation for beauty.

FOOTNOTES:

[1] Trade Mark

A tiny motif of jewel-like beauty combines enchantingly to look like the first bright snowfall. Excellent for luncheon sets, tablecloths, or chair sets. Try a coarser thread for a heavier texture.

SNOWDRIFT No. 7193

CLARK’S O.N.T. or J. & P. COATS BEST SIX CORD MERCERIZED CROCHET , size 50 . See thread information on page 22 .

GAUGE : Using the materials recommended, each motif measures 1¾″ diameter and requires about 6½ yds. of thread.

RECOMMENDED USES: Tablecloths, bedspreads, luncheon sets, vanity sets, scarfs, chair sets, centerpieces.

MOTIF... Ch 10, join with sl st. 1st rnd : Ch 3, 23 dc in ring. Join to 3rd st of ch-3. 2nd rnd : Ch 4, * dc in next dc, ch 1. Repeat from * around. Join last ch-1 to 3rd st of ch-4. 3rd rnd : Sl st in next sp. Ch 10, * skip 1 sp, tr in next sp, ch 6. Repeat from * around. Join last ch-6 to 4th st of ch-10. 4th rnd : * Ch 2, skip 2 ch, dc in next ch, ch 2, dc in next ch, ch 2, sc in next tr. Repeat from * around; join. 5th rnd : * Ch 2, dc in next dc, ch 2, dc in ch-2 sp, ch 2, dc in next dc, ch 2, sc in next sc. Repeat from * around. Fasten off.

Make another motif to 4th rnd incl. 5th rnd : Ch 2, dc in next dc, * ch 1, sl st in corresponding sp on 1st motif, ch 1, dc in next sp on 2nd motif, ch 1, sl st in next sp on 1st motif, ch 1, dc in next dc on 2nd motif, ch 2, sc in next sc, ch 2, dc in next dc. Repeat from * once more; complete rnd as for 1st motif.

MAGNOLIA No. 6020

GAUGE : Using the materials recommended, each motif measures about 6″ in diameter before joining, and requires about 50 yds. of thread. Fill-in requires about 7½ yds. Allow an extra ball for edging.

FIRST MOTIF... Starting at center, ch 6, join with sl st. 1st rnd : Ch 4 (to count as tr), 15 tr in ring. Join with sl st to 4th st of ch-4. 2nd rnd : Ch 7, * tr in next tr, ch 3. Repeat from * around; join to 4th st of ch-7. 3rd rnd : Ch 4, * in next sp make a pc st— to make pc st, ch 1, make 5 tr in sp, drop loop from hook, insert hook in ch-1 preceding 5 tr and draw dropped loop through . Then make a tr and pc st in same sp. Make tr in next tr, ch 3, tr in next tr. Repeat from * around. Join last ch-3 to 4th st of ch-4. 4th rnd : Ch 4, pc st in same place as sl st, * tr in next pc st, pc st in next tr, tr in next pc st; in next tr make a pc st and a tr. Ch 4, in next tr make a tr and a pc st. Repeat from * around; join last ch-4 to 4th st of ch-4 first made. 5th rnd : Sl st in tip of next pc st, ch 4; * (pc st in next tr, tr in next pc st) twice; ch 4, skip next tr, 5 tr in next ch-4 sp, ch 4, skip next tr, tr in next pc st. Repeat from * around; join. 6th rnd : Sl st in tip of next pc st, ch 4, tr in next tr and in tip of next pc st, holding back the last loop of each tr on hook; thread over and draw through all loops on hook (a cluster). * Ch 5, skip next tr and sp, make 2 tr in next tr, tr in next 3 tr, 2 tr in next tr; ch 5, skip next sp and 1 tr; make tr in next 3 sts, holding back the last loop of each tr on hook; thread over and draw through all loops on hook (another cluster). Repeat from * around; join. 7th rnd : * Ch 11, skip next sp and 1 tr; tr in next 5 tr, holding back the last loop of each tr on hook and complete a cluster as before. Ch 11, sc in tip of next cluster. Repeat from * around. Join and fasten off. This completes one motif.

SECOND MOTIF... Work 1st 6 rnds as for first motif. 7th rnd : Ch 11, skip 1 sp and 1 tr, tr in next 5 tr, holding back the last loop of each tr on hook and complete a cluster as before. Ch 5, sl st in corresponding ch-11 loop on 1st motif (always keeping right side of work on top); ch 5, sc in tip of next cluster on 2nd motif. Ch 5, sl st in next ch-11 loop on 1st motif; ch 5, skip next sp and tr; make a 5-tr cluster on 2nd motif as before, and complete rnd as for 1st motif. Fasten off.

Make necessary number of motifs, joining as 2nd motif was joined to 1st, leaving 2 ch-11 loops free between joinings.

FILL-IN MOTIF... 1st rnd : Starting at center, ch 8, make tr in 8th ch from hook; (ch 4, tr in same place as last tr was made) twice; ch 4, sl st in 4th st of ch-8 first made. 2nd rnd : Ch 4 (to count as tr), * in next sp make pc st, tr and another pc st; in next tr make tr, ch 6 and tr. Repeat from * around, joining last ch-6 to 4th st of ch-4 first made. 3rd rnd : Ch 4, tr in each of next 4 sts, holding back the last loop of each tr on hook; thread over and draw through all loops on hook (a cluster). Ch 5, sl st in a free ch-11 loop (of a large motif) between joinings, * ch 5, sc in next ch-6 loop of fill-in motif, ch 5, sl st in next free ch-11 loop on large motif, ch 5, tr in each of next 5 sts of fill-in motif, holding back the last loop of each tr on hook, and complete a cluster. Ch 5, sl st in next free ch-11 loop. Repeat from * around, joining last ch-5 with sl st to tip of 1st cluster made. Fasten off. Fill in all spaces between joinings in this manner.

EDGING... Attach thread to a joining point between any 2 motifs and work along entire outer edge as follows: Make 7 sc in 1st loop of next motif; in each of next 6 loops of same motif (10 loops of corner motifs) make: 1 sc, 1 half dc, 5 dc, 4 tr, 5 dc, 1 half dc and 1 sc. Make 7 sc in next loop (preceding next joining), 7 sc in 1st loop of next motif, and continue thus around. Fasten off.

This lovely motif has made crochet history. Its gossamer patterning has a rare beauty that holds enchantment, whether in plain double crochet or in the popcorn stitch variation, “Magnolia.”

QUEEN ANNE’S LACE No. 7050

CLARK’S BIG BALL MERCERIZED CROCHET , size 20 . See thread information on page 22 .

GAUGE : Using the materials recommended, each motif measures 4¾″ in diameter and requires about 24 yds. of thread. Fill-in motif requires about 5 yds.

FIRST MOTIF... Ch 6, join with sl st. 1st rnd : Ch 6, * tr in ring, ch 2. Repeat from * 6 more times, join to 4th st of ch-6 (8 sps). 2nd rnd : Ch 4, 4 tr in 1st sp, * ch 2, 5 tr in next sp. Repeat from * around. Join last ch-2 to 4th st of ch-4. 3rd rnd : Ch 4, tr in same place as sl st, tr in next 4 tr, * tr in 1st ch of [Pg 5] ch-2, ch 3, tr in next ch of same ch-2, tr in next 5 tr. Repeat from * around. Join last ch-3 to 4th st of ch-4; sl st in 1st tr of group. 4th rnd : Ch 4; make tr in next 4 tr, working off together as for a cluster; * ch 4, 5 tr in next ch-3 sp, ch 4, skip 1st tr of next group; make tr in next 5 tr, working off together as for a cluster. Repeat from * around. Join last ch-4 to tip of first cluster. 5th rnd : Ch 8, * skip 1st 3 ch of ch-4, tr in next ch, tr in next 5 tr, tr in 1st ch of next ch-4, ch 4, tr in tip of cluster, ch 4. Repeat from * around. Join to 4th st of ch-8. 6th rnd : * Ch 12, skip 1st tr of next group, tr in next 5 tr, working off together as for a cluster; ch 12, sc in the single tr between groups. Repeat from * around. Join last ch-12 to base of first ch-12 (16 loops). Break off.

SECOND MOTIF... Work 1st 5 rnds as for 1st motif. 6th rnd : Ch 12, skip 1st tr of next group; tr in next 5 tr, working off together as for a cluster; ch 6, sl st in 1st ch-12 loop on 1st motif (always keep right side of work on top), ch 6, sc in next single tr on 2nd motif, ch 6, sl st in next ch-12 loop on 1st motif, ch 6, make a cluster back on 2nd motif. Complete this rnd as for 1st motif (no more joinings).

Join 2 ch-loops of all adjacent sides in this manner, thus leaving 2 loops free between joinings, for fill-in motifs to be made later.

FILL-IN MOTIF... 1st rnd : Ch 8, tr in 8th ch from hook, ch 4, tr in same place, ch 4, tr in same place, ch 4, join to 4th ch of ch-8 (4 sps). 2nd rnd : Ch 4, 6 tr in 1st sp, * ch 5, 7 tr in next sp. Repeat from * around, ch 5, join to 4th st of ch-4; sl st in 1st tr. 3rd rnd : Ch 4; make tr in next 4 tr, working off together as for a cluster; ch 5, join to 1st ch-12 loop of a large motif (as large motifs were joined), * ch 5, sc in next ch-5 loop back on fill-in motif, ch 5, join to 2nd ch-12 loop of same large motif, ch 5, work a 5-tr cluster back on fill-in motif, ch 5, join to 1st ch-12 loop of next large motif. Repeat from * around. Fasten off.

EDGING... Attach thread to joining point between any 2 large motifs. * 7 sc in 1st loop of next motif; in each remaining loop of same motif make sc, half dc, 5 dc, 4 tr, 5 dc, half dc, sc; 7 sc in last loop. Repeat from * all around.

Two lovely versions of the traditional pinwheel design. The lacy backgrounds have an air of graciousness in fine or heavier threads.

CLARK’S O.N.T. or J. & P. COATS BEST SIX CORD MERCERIZED CROCHET , size 30 . See thread information on page 22 .

GAUGE : Using the materials recommended, each motif measures 4″ square. About 26 yds. are required for 1 motif. About 4 small balls or 2 large balls are required for tablecloth or bedspread edging.

MOTIF... Ch 6, join with sl st to form ring. 1st rnd : * Ch 7, sc in ring. Repeat from * 3 more times. 2nd rnd : * Ch 6, 3 sc in next loop. Repeat from * 3 more times. 3rd rnd : Ch 6, 3 sc in 1st ch-6 loop of previous rnd and 1 sc in each of next 2 sc, picking up only the back loop of sc throughout motif; ch 6, 3 sc in next ch-6 loop and 1 sc in back loop of each of the 2 sc. Continue in this manner, making ch-6 between groups, 3 sc over the ch-loop and sc in each sc except the last sc of each group, until the 8th rnd is completed (15 sc in each group). 9th rnd : * Ch 6, sc in ch-6 of previous rnd, ch 6, skip 1st sc of group, 1 sc in each of next 13 sc, picking up back loops only, and repeat from * around. 10th rnd : * Ch 6, sc in 1st ch-6 loop of previous rnd, ch 6, sc in next loop, ch 6, skip 1st sc of group, sc in each sc to within last sc of same group. Repeat from * around. 11th rnd : * Ch 6, sc in ch-6, ch 6, 4 dc in center ch-6 loop, ch 6, sc in next ch-6 loop, ch 6, skip 1st sc, sc in each sc to within the last sc. Repeat from * around. 12th rnd : * Ch 6, sc in loop, ch 6, 3 sc in loop, ch 3, skip 4-dc group, 3 sc in next loop, ch 6, sc in next loop, ch 6, skip 1st sc and make sc in each of next sc, omitting the last sc. Repeat from * around. 13th rnd : * Ch 6, sc in loop, ch 6, 3 sc in next loop, ch 10, skip the 3 sc, the ch-3 and the 3 sc, then make 3 sc in next loop, ch 6, sc in next loop, ch 6, skip 1st sc, sc in each of next sc, omitting last sc in group. Repeat from * around. 14th rnd : * Ch 6, sc in next loop, ch 6, 3 sc in next loop, ch 6, 4 dc in ch-10 loop, ch 6, 3 sc in next loop, ch 6, sc in next loop, ch 6, skip 1st sc, sc in each of next 3 sc. Repeat from * around. 15th rnd : Ch 6, sc in next loop, * ch 6, 3 sc in next loop, ch 6, 4 dc in next loop, ch 14, 4 dc in next loop, ch 6, 3 sc in next loop, ch 6, sc in next loop, ch 3, sc in next loop. Repeat from * around. 16th rnd : Ch 5, sc in next loop, ch 10, sc in next loop, ch 10, sc in 5th st of corner loop, ch 10, sc in 10th st of same corner loop. Continue thus, making ch-10 loops all around, skipping the ch-3 at tip of sc-sections and making corners as before. Join last ch-10 with sl st to sc following 1st ch-5 in this rnd. Fasten off.

SECOND MOTIF... Work as for 1st motif to 15th rnd incl. 16th rnd : Ch 5, sc in next loop, ch 10, sc in next loop, ch 10, sc in 5th st of corner loop, ch 5, sc in corner loop of 1st motif, ch 5, skip 4 ch on motif in work, sc in next ch, ch 5, sc in corresponding loop of 1st motif, ch 5, sc in next loop on motif in work and continue thus, joining the following 5 loops as before.

Join all motifs in this manner (where 4 corners meet, join the last 2 corners to joining of 2 previous corners).

EDGING... 1st row : Holding right side of work toward you, attach thread to the center st of any corner loop, ch 7 dc in same place, ch 5, * sc in next sc, ch 8, dc in next sc, ch 6, dc in same sc, ch 8. Repeat from * across this side of piece to within last motif, skipping all joinings of motifs. Now work into joining of last 2 motifs, treating joining as an sc and continue to within corner loop of piece, ch 5, in center st of corner loop make dc, ch 4 and dc; ch 5, sc in next sc. Ch 8, and continue thus around piece, ending with ch 5, sl st to 3rd st of ch-7 first made. 2nd row : Ch 7, 4 dc in loop, ch 3, dc in same loop, ch 6, * 2 sc in next sc, ch 8, dc in next ch-6 loop, ch 3, 4 dc in same loop, ch 3, dc in same loop, ch 8. Repeat from * all around, ending row with ch 6, sl st in 3rd st of ch-7 loop first made. 3rd row : Sl st in loop, ch 3, 3 dc in same loop, * ch 5, skip 4-dc group, 4 dc in next loop, ch 9, sc in next sc, ch 9, 4 dc in loop just before next 4-dc group. Repeat from * all around, ending row with ch 9, sl st to 3rd st of ch-3 first made.

PINWHEEL No. 7064

CLARK’S O.N.T. or J. & P. COATS BEST SIX CORD MERCERIZED CROCHET , size 50 . See thread information on page 22 .

GAUGE : Using the materials recommended, each motif measures 3½″ square and requires approximately 24 yds. of thread.

RECOMMENDED USES: Tablecloths, bedspreads, luncheon sets, runners, centerpieces, chair sets.

FIRST MOTIF... Starting at center, ch 8, join with sl st. 1st rnd : 16 sc in ring. 2nd rnd : Ch 4, * dc in next sc, ch 1. Repeat from * around. Join to 3rd st of ch-4 (16 sps). 3rd rnd : Ch 3, dc in same place as sl st, * ch 5, skip next dc, 2 dc in next dc. Repeat from * around; join last ch-5 to 3rd st of ch-3 (8 groups of 2 dc). 4th rnd : Sl st in next dc, ch 3, * 2 dc in next loop, ch 6, skip 1st dc of next 2-dc group, dc in next dc of same group. Repeat from * around. Join last ch-6 to 3rd st of ch-3. 5th rnd : Sl st in next dc, ch 3, dc in next dc, 2 dc in next loop, * ch 7, skip 1st dc of next group, dc in next 2 dc of same group, 2 dc in next loop. Repeat from * around. Join as before. 6th rnd : Sl st in next dc, ch 3, dc in next 2 dc, 2 dc in next loop. * Ch 8, skip 1st dc of next group, dc in next 3 dc of same group, 2 dc in next loop. Repeat from * around; join as before. 7th, 8th and 9th rnds : Continue in this manner, always skipping the 1st dc of each group and making 2 increases in each group; also, on 7th rnd make ch-9 loops; on 8th rnd make ch-10 loops; on 9th rnd make ch-11 loops (8 dc in each group on 9th rnd); join.

10th rnd : Sl st in next 2 dc, ch 3, dc in next 5 dc, * ch 6, sc in next loop, ch 6, skip 1st 2 dc of next group, dc in next 6 dc, ch 10, sc in next loop, ch 10, skip 1st 2 dc of next group, dc in next 6 dc. Repeat from * around; join. 11th rnd : Sl st in next 2 dc, ch 3, dc in next 3 dc, * ch 7, sc in next loop, sc in following loop, ch 7, skip 1st 2 dc of next dc-group, dc in next 4 dc, ch 6, 4 dc in next loop, ch 10, 4 dc in next loop, ch 6, skip 1st 2 dc of next group, dc in next 4 dc. Repeat from * around; join. 12th rnd : Sl st in next 2 dc, ch 3, dc in next dc, * ch 11, sc between the 2 sc of previous rnd, ch 11, skip 1st 2 dc of next group, dc in next 2 dc, ch 7, 4 dc in next loop, ch 7, 4 dc in next loop, ch 11, 4 dc in same loop (this is corner). Ch 7, 4 dc in next loop, ch 7, skip 1st 2 dc of next group, dc in next 2 dc. Repeat from * around. Join and fasten off.

SECOND MOTIF... Work 1st 11 rnds as for 1st motif. 12th rnd : Sl st in next 2 dc, ch 3, dc in next dc, ch 11, sc between the 2 sc of previous rnd, ch 11, skip 1st 2 dc of next dc-group, dc in next 2 dc. Ch 7, 4 dc in next loop, ch 7, 4 dc in following loop, ch 5, sc in corner loop of 1st motif (always keep right side of work on top). Ch 5, 4 dc in same loop back on 2nd motif, ch 3, sc in next ch-7 loop of 1st motif, ch 3, 4 dc in next loop on 2nd motif, ch 3, sc in next loop on 1st motif, ch 3, skip 1st 2 dc of group on 2nd motif and make dc in next 2 dc, ch 5, sc in next ch-11 loop on 1st motif, ch 5, sc between the 2 sc on 2nd motif.

Ch 5, sc in ch-11 loop on 1st motif, ch 5, skip 1st 2 dc of group on 2nd motif and make dc in next 2 dc, ch 3, sc in next loop on 1st motif, ch 3, 4 dc in next loop back on 2nd motif. Ch 3, sc in next loop on 1st motif, ch 3, 4 dc in next loop on 2nd motif, ch 5, sc in corner loop on 1st motif, ch 5, 4 dc in same loop on 2nd motif, ch 7, 4 dc in next loop on 2nd motif. Complete rnd as for 1st motif (no more joinings).

Make necessary number of motifs, joining at all adjacent sides as 2nd motif was joined to 1st (where 4 corners meet, join 3rd and 4th corners to joining of other corners).

EDGING... 1st rnd : Attach thread to ch-7 loop just before corner, sc in same loop, ch 11; in corner loop make sc, ch 15 and sc. * Ch 11, sc in next loop. Repeat from * around, making a ch-15 loop at each corner as before. Join last ch-11 with sl st to 1st sc. 2nd rnd : Sl st in next 3 ch of next loop, 5 sc in same loop, ch 7; in corner loop make dc, ch 3 and dc; ch 7; * 5 sc in next loop, ch 5. In next loop make dc, ch 3 and dc; ch 5. Repeat from * around, making corners as before. Join last ch-5 to 1st sc made. 3rd rnd : Sc in next 4 sc, ch 6, skip 5 ch, sc in next ch, ch 3. In corner ch-3 make dc, ch 3 and dc; ch 3, skip 1 ch, sc in next ch. * Ch 6, sc in next 4 sc, ch 6; in next ch-3 (between 2 dc) make dc, ch 3 and dc. Repeat from * around, making corners as before; join. 4th rnd : Sc in next 3 sc, ch 5, sc in next sc, ch 5; in corner ch-3 make dc, ch 3 and dc; ch 5, sc in next sc. * Ch 5, sc in next 3 sc, ch 5; in ch-3 (between 2 dc) make dc, ch 3 and dc. Repeat from * around, making corners as before; join. 5th rnd : Sc in next sc, ch 6, sc in next sc, ch 6. In corner ch-3 make 4 dc, ch 5 and 4 dc; ch 6, sc in next sc, ch 6, sc in center sc of 3-sc group. * Ch 7; in ch-3 (between 2 dc) make 4 dc, ch 5 and 4 dc. Ch 7, sc in center sc of next 3-sc group. Repeat from * around. Fasten off.

HOSPITALITY No. 7067

CLARK’S O.N.T. or J. & P. COATS BEST SIX CORD MERCERIZED CROCHET , size 10. See thread information on page 22 .

GAUGE : Using the materials recommended, 2 sps make 1″; 2 rows make 1″ (when blocked). Each square measures about 19½″ before blocking and about 20½″ after blocking, and requires about 320 yds. of thread.

SQUARE... Starting at center, ch 11, join with sl st. 1st rnd : Ch 4 (to count as tr), 4 tr in ring, * ch 7, 5 tr in ring. Repeat from * until 4 groups of tr’s are made. Then ch 7, join with sl st to 4th st of ch-4. 2nd rnd : Ch 4, tr in each of next 4 tr, * 4 tr in corner sp, ch 7, 4 tr in same corner sp, tr in each of next 5 tr. Repeat from * around. Join as before. 3rd rnd : Ch 7 (to count as tr and ch-3), * skip 3 tr, tr in next tr, ch 3, tr in last tr of tr-group, ch 3, tr in corner st of ch-7, ch 7, tr in same corner st, ch 3, tr in 1st tr of tr-group on other side, ch 3, skip 3 tr, tr in next tr, ch 3. Repeat from * around. Join to 4th st of ch-7. 4th rnd : Ch 7, * skip ch-3, tr in next tr, ch 3, skip ch-3, tr in next tr, 3 tr in sp, tr in next tr, 4 tr in corner sp, ch 7, 4 tr in same corner sp, tr in next tr, 3 tr in next sp, tr in next tr, ch 3, skip ch-3, tr in next tr, ch 3. Repeat from * around; join to 4th st of ch-7 first made.

5th rnd : Ch 7, * skip ch-3, tr in next tr, 3 tr in sp, tr in each tr of tr-group, 4 tr in corner sp, ch 7, 4 tr in same corner sp, tr in next tr, tr in each tr of tr-group, 3 tr in sp, tr in next tr, ch 3. Repeat from * around. Join as before. 6th to 20th rnds incl : Work in the same manner following chart, making ch-3 for sps and ch-7 for each corner sp, and joining each rnd with a sl st. The dotted line on chart shows where each rnd begins. At end of 20th rnd, join and fasten off.

Make necessary number of squares and sew together on wrong side with neat over-and-over stitches.

GAUGE : Using the materials recommended, 4 sps make 1″; 4 rows make 1″. Each motif measures 7½″ square and requires about 100 yds. of thread. About 2 balls are required for bedspread fringe.

MOTIF... Starting at center section, ch 15. 1st row : Dc in 3rd ch from hook and in next 2 ch (these 4 dc make 1 bl); ch 2, skip 2 ch, dc in next ch (sp); make another sp, end with 4 dc (bl). Ch 5, turn. 2nd row : Dc in last dc of bl; make dc in next 2 ch, dc in dc, dc in next 2 ch and in dc. Ch 2, dc in top st of turning ch-3. Ch 5, turn. 3rd row : Sp over sp and bl over bl. Ch 3, turn. 4th row : Dc in next 2 ch and in dc, 2 sps over next 2 bls, bl over next sp (center section completed). Hereafter work in rnds.

1st rnd : Ch 5, dc at base of last dc made, ch 2, dc at base of dc (turning ch) of previous row, ch 2, dc at base of next end dc, ch 2, dc at base of next ch-3, ch 5 (corner), dc in same place, sp over next bl. Continue to make sps thus around and ch-5 at corners, ending with ch 5, join with sl st to 3rd ch of ch-5 first made. 2nd rnd : Ch 5, dc in next dc. Now make sp over each sp around, making an extra ch-5 at each corner. Join. 3rd rnd : Ch 5 (to count as dc of last bl and ch-2 of 1st sp), dc in next dc; 3 more sps, 7 dc (2 bls); ch 5, another dc in corner ch, 6 more dc, 4 sps, 7 dc. Continue thus around. Join. 4th rnd : Ch 3, 4 bls over 4 sps, 2 bls over 2 bls, ch 2, dc in 3rd ch of corner ch-5, ch 5, dc in same place, ch 2, dc in next dc, 8 bls, sp, ch 5 for corner sp, sp. Continue thus around, ending with 2 bls, join. Follow chart for remainder of pattern, always making an extra ch-5 at corners and working into center st of this ch on following rnd.

Make necessary number of motifs and sew together on wrong side with neat over-and-over stitches. Make fringe in every other sp around.

Here are three designs which, when joined, form another design that is a complete surprise. Favorites all!

WHEEL OF FORTUNE
No. 7288

GAUGE : Using the materials recommended, each motif measures 3½″ from side to side when blocked, and requires about 10½ yds. of thread.

RECOMMENDED USES: Tablecloths, bedspreads, luncheon sets, bureau scarfs, chair sets, centerpieces.

MOTIF... Starting at center, ch 6, join with sl st. 1st rnd : Ch 5, * dc in ring, ch 2. Repeat from * 4 more times, join to 3rd st of ch-5. 2nd rnd : Ch 4, 2 tr in same place as sl st, * ch 2, tr in next sp, ch 3, sl st in last tr, ch 2, 3 tr in next tr. Repeat from * around. Join last ch-2 with sl st to 4th st of ch-4. Now pick up only the back loop of each tr throughout. 3rd rnd : Ch 4, tr in same place as sl st, * tr in next tr, 2 tr in next tr, ch 7, 2 tr in next tr of 3-tr group. Repeat from * around. Join last ch-7 to 4th st of ch-4. 4th rnd : Ch 4, tr in same place as sl st, * tr in next 3 tr, 2 tr in next tr, ch 4, skip 3 ch of ch-7, sc in next ch, ch 3, sc in same place, ch 4, 2 tr in next tr. Repeat from * around. Join last ch-4 to 4th st of ch-4 first made. Fasten off. This completes motif.

Sew motifs together at tr-groups, on wrong side, picking up a single loop of each tr.

For a smart modern or peasant effect, cameo crochet is an outstanding favorite. Versatile, too.

COLONIAL CHAIR SET
No. 7168

CLARK’S O.N.T. or J. & P. COATS PEARL COTTON , size 5, 9 balls of Ecru and 2 balls each of Green and Blue. Milward’s steel crochet hook No. 6 or 7. Bias binding. Cotton batting. 1 yd. of any material.

Completed chair seat measures about 16″ x 16″, measuring across center; chair back measures about 8″ x 14½″.

GAUGE : 10 sts make 1″; 4 rows make 1″ (1 square is equivalent to 3 dc).

TO CHANGE COLOR : Before drawing through last 2 loops of last dc of one color-group, drop this color, pick up 2nd color, thread over and draw through the 2 loops on hook. Continue with 2nd color according to chart, carrying the dropped color along top of previous row and working over it to conceal.

CHAIR SEAT... Starting at front edge, with Ecru ch 125. 1st row : Dc in 4th ch from hook, dc in each ch across (123 dc, counting turning ch as 1 dc). Ch 3, turn. 2nd row : 2 dc in 1st dc (2 dc increased), dc in each of next 29 dc. Then, holding Blue along top of 1st row, with Ecru make dc in each of next 3 dc (thus concealing Blue), changing color in last dc of Ecru group. With Blue make dc in each of next 3 dc, carrying Ecru concealed in dc’s and changing color in last dc of Blue group. With Ecru make dc in each of next 51 dc, carrying Blue concealed in dc’s and changing color in last dc of Ecru group. With Blue make dc in each of next 3 dc, carrying Ecru as before and changing color in last dc of Blue group. With Ecru make dc in each dc across, dropping Blue after carrying it for 3 sts, and inc. 2 sts at end of row (127 dc). 3rd row : 2 dc in 1st dc, dc in each of next 31 dc; conceal Blue in next 3 Ecru dc, changing color in last dc of Ecru group; 3 Blue dc, changing color as before; 21 Ecru dc. Then, holding Green with Blue along top of 2nd [Pg 11] row, with Ecru make dc in each of next 3 dc (concealing Blue and Green), changing to Green in last dc of Ecru group. With Green, make dc in each of next 3 dc, carrying Ecru and Blue concealed, and changing to Ecru in last dc of Green group. With Ecru make dc in each of next 24 dc, dropping Green after carrying it for 3 sts and changing color in last dc of Ecru group; 3 Blue dc, changing color as before. With Ecru make dc in each dc across, increasing 2 dc at end of row (131 dc). Ch 3, turn. Continue in this manner, changing colors as indicated by symbols on chart, and increasing 2 dc at both ends of each row until there are 159 dc in the row. When work reaches the shaping at top, dec. 2 dc at both ends of each row until 123 dc remain (to dec., work off 2 dc as 1 dc twice). Fasten and break off. Make another piece, using Ecru only.

Block pieces. Cut 2 thicknesses of any material to same shape as crocheted pieces. Sew the 2 pieces of material together, leaving an opening. After filling with cotton batting, sew up opening (finished pad should be slightly smaller than crocheted pieces). Place wrong sides of crocheted pieces together, and baste edges, leaving an opening of 12″ at top. Then bind basted edges and both edges of opening. Insert pad, and sew edges of opening together. Sew two 8” lengths of bias binding at each corner of top edge, for ties (stitch raw edges together).

CHAIR BACK... Starting at lower edge, with Ecru ch 101. 1st row : Dc in 4th ch from hook, dc in each ch across (99 dc, counting turning ch as 1 dc). Ch 3, turn. Hereafter follow chart for chair back, increasing as for chair seat until there are 135 dc in the row. When work reaches shaping at top, dec. 2 dc at both ends of each row until 99 dc remain. Break off. Make another piece same as this, using only Ecru. Block pieces. Finish as for chair seat.

J. & P. COATS KNIT-CRO-SHEEN , 3 balls of dark color and 2 balls of light color .

Seat Cover measures about 18″ at front edge, 14″ at back edge, and 14″ along both side edges. Side strip measures about 3″ deep.

GAUGE : 10 dc make 1″; 4 rows make 1″ (each individual square on chart indicates 3 dc).

CHAIR SEAT COVER... Starting at front edge, with dark color ch 185 (to measure about 19″). 1st row : Dc in 4th ch from hook, dc in next ch, thread over, insert hook in next ch and draw loop through; thread over and draw through 2 loops; drop dark color, attach light color and draw through remaining 2 loops (3 dark dc made). Holding dark color along top of chain and working over it to conceal it, work dc in 7 ch. Thread over, insert hook in next ch and draw loop through; thread over and draw through 2 loops; drop light color, pick up dark color and draw through remaining 2 loops (6 light dc made). * With dark color make 3 dc, carrying light color concealed and completing last dc with light color as before. Make 6 light dc, carrying dark color and completing last dc with dark color. Repeat from * 18 more times, 3 dark dc, ch 3, turn. 2nd row : Working into dc, carrying unused color and working over it to conceal it, make 2 dark dc, * 6 light dc, 3 dark dc. Repeat from * across. Hereafter follow chart, decreasing 1 st at both ends of the 10th row and every other row thereafter until 141 sts remain— to dec. work off 2 dc as 1 dc . When design is completed, fasten off light color (141 dc). With dark color, sl st across 1st 10 dc, ch 3 and make dark dc in each dc across to within 10 dc from opposite end. Work across these 121 dc without decreasing for 3″. Fasten off.

SIDE STRIP... With dark color ch 32 (to measure about 3¼″). 1st row : Dc in 4th ch from hook, dc in each ch across (30 dc, counting turning ch). Ch 3, turn. 2nd row : Dc in each dc across. Ch 3, turn. Repeat 2nd row until piece is long enough to go around the 2 side edges and front edge of chair seat cover (about 46″). Fasten off. Sew edge of this strip to front and side edges of chair seat cover.

CORDS... Cut 12 strands of light color, each 6 yds. long. Twist strands tightly, then double the twisted strands and give them a 2nd twist in the opposite direction. Sew this cord along edges of chair seat cover where strip was joined, and across back where color-pattern ends. Make another cord same as this, and sew all around outer edges. Cut remaining cord into 4 pieces of equal length, to be used as ties.

J. & P. COATS KNIT-CRO-SHEEN , 4 balls of White or Ecru for main color (to be referred to as “M”), and 8 balls of a contrasting color (to be referred to as “C”) .

The above amount of materials is sufficient for 4 place mats, each about 11½″ x 17″, and a center mat about 14″ x 32″.

PLACE MATS—(Make 4)... Starting at long side, with C color ch 192 (to measure about 18″). 1st row : Dc in 4th ch from hook, dc in each ch across (190 dc, counting turning ch-3 as 1 dc). Ch 3, turn. 2nd row : Dc in each dc across. Ch 3, turn. 3rd row : Dc in each of 5 dc; dc in next dc, leaving the last 2 loops on hook, drop C, attach M color, and * draw through 2 loops. Then, holding C along top of previous row, make dc in each of next 4 dc (thus concealing C); dc in next dc, leaving the last 2 loops on hook, drop M, pick up C and draw through 2 loops; dc in next dc, leaving the last 2 loops on hook, drop C, pick up M and draw through 2 loops; dc in each of next 5 dc, leaving the last 2 loops on hook and concealing C as before; drop M, pick up C and draw through 2 loops. Then, holding M along top of previous row, make dc in each of 4 dc, leaving the last 2 loops on hook (thus concealing M); drop C, pick up M. Repeat from * across, ending row with 5 M dc and 7 C dc. Ch 3, turn. Hereafter work as follows, changing color and concealing unused color as before. 4th row : 6 C dc, * 3 M dc, 5 C dc, 3 M dc, 4 C dc. Repeat from * across, ending with 7 C dc. Ch 3, turn. 5th row : 6 C dc, * 5 M dc, 1 C dc, 5 M dc, 4 C dc. Repeat from * across, ending row with 7 C dc. Ch 3, turn. 6th row : 17 C dc, * 4 M dc, 11 C dc. Repeat from * across, ending row with 18 C dc. Ch 3, turn. The last 4 rows (3rd to 6th rows incl.) constitute the pattern. Repeat pattern 10 more times, but omit the 6th row of the last pattern. Break off M, and work 2 rows of C dc. Break off.

CENTER MAT... Starting at short side with C, ch 161 (to measure about 14″). Work exactly as for place mats until piece measures 31½″. Break off M, and work 2 rows of C dc. Break off.

LUCKY STAR No. 7144

CLARK’S BIG BALL MERCERIZED CROCHET , size 20 . See thread information on page 22 .

GAUGE : Using the materials recommended, each motif measures 4½″ in diameter and requires about 35 yds. of thread. Fill-in requires about 4 yds.

MOTIF... Starting at center, ch 8, join with sl st to form a ring. 1st rnd : Ch 5, * dc in ring, ch 2. Repeat from * 6 more times. Join last ch-2 with sl st to 3rd st of ch-5 first made (8 sps). 2nd rnd : Sl st in ch-2 sp, ch 3, 2 dc in same sp, ch 2, * 3 dc in next sp, ch 2. Repeat from * around. Join last ch-2 with sl st to 3rd st of ch-3 first made. 3rd rnd : Ch 3, dc in same place as sl st, * dc in next dc, 2 dc in next dc, ch 2, 2 dc in next dc. Repeat from * around, ending with ch 2. Join to 3rd st of ch-3 first made. 4th rnd : Ch 3, dc in same place as sl st, * dc in each of next 3 dc, 2 dc in next dc, ch 2, 2 dc in next dc. Repeat from * around, ending with ch 2. Join. 5th rnd : Ch 3, dc in same place as sl st, * dc in each of next 5 dc, 2 dc in next dc, ch 3, 2 dc in next dc. Repeat from * around, ending with ch 3. Join. 6th rnd : Sl st in next dc, ch 3, * dc in each of next 6 dc, ch 3, sc in ch-3 sp, ch 3, skip 1 dc, dc in next dc. Repeat from * around, ending with ch 3. Join. 7th rnd : Sl st in next dc, ch 3, * dc in each of next 4 dc, ch 4, sc in ch-3 sp, sc in next sc, sc in next ch-3 sp, ch 4, skip 1 dc, dc in next dc. Repeat from * around. Join. 8th rnd : Sl st in next dc, ch 3, * dc in each of next 2 dc, ch 5, sc in ch-4 sp, sc in each of next 3 sc, sc in next sp, ch 5, skip 1 dc, dc in next dc. Repeat from * around, ending with ch 5. Join. 9th rnd : Sl st in next dc, ch 3, 2 dc in same place as sl st, holding back the last loop of each dc on hook; thread over and draw through all loops on hook, ch 1 to fasten (thus a 3-dc cluster is made—counting ch-3 as 1 dc); * ch 6, sc in ch-5 loop, sc in each of next 5 sc, sc in next loop, ch 6, skip 1 dc, 3-dc cluster in next dc. Repeat from * around, ending with ch 6, sl st in tip of 1st cluster made. 10th rnd : Sc in same place as sl st, ** ch 5, skip 3 sc, tr in next sc, * ch 2, tr in same sc. Repeat from * 2 more times, ch 5, sc in tip of next cluster. Repeat from ** around, ending with ch 5. Join. 11th rnd : Ch 6, dc in same place as sl st, * ch 3, 4 sc in ch-5 loop, sc in ch-2 sp, ch 3; in next ch-2 sp make dc, ch 3, dc; ch 3, sc in next ch-2 sp, 4 sc in next ch-5 loop, ch 3; in next sc make dc, ch 3, dc. Repeat from * around, ending with ch 3. Join with sl st to 3rd st of ch-6 first made. 12th rnd : Sl st in ch-3 sp, ch 6, dc in same sp, * ch 3, sc in next ch-3 sp, ch 2, skip 2 sc, sc in next sc, ch 2, sc in next sp, ch 3; in next ch-3 sp (between dc’s) make dc, ch 3, dc. Repeat from * around, ending with ch 3, sl st in 3rd st of ch-6 first made. Fasten and break off. This completes motif.

Sew motifs together on wrong side with neat over-and-over stitches, joining 2 points of each motif to 2 points of adjacent motifs, leaving 2 points free on each motif, between joinings, to be filled in later.

FILL-IN LACE... Ch 8, join with sl st to form ring. 1st rnd : Ch 5, * dc in ring, ch 2. Repeat from * 6 more times. Join with sl st to 3rd st of ch-5 first made (8 sps). 2nd rnd : Sc in same place as sl st, * ch 18, sc at joining of 2 motifs, ch 18, sc in same place as 1st sc was made, sc in next sp, ch 9, sc in next point on motif, ch 9, sc in same sp on ring where last sc was made, sc in next sp, ch 9, sc in next point, ch 9, sc in same sp on ring where last sc was made, sc in next dc. Repeat from * around. Join with sl st. Fasten off.

CLARK’S O.N.T. MERCERIZED BEDSPREAD COTTON. See thread information on page 22 .

GAUGE : Using the materials recommended, each block measures 8″ square and requires about 96 yds. of thread.

FIRST BLOCK... 1st rnd : Ch 4, make 11 half dc in 3rd ch from hook. Join with sl st to top st of ch-4. 2nd rnd : Ch 3 (to count as dc), dc in same place as joining, 2 dc in each of next 11 half dc (24 dc in all). Join to top of ch-3. 3rd rnd : Ch 3, 2 dc in same place as sl st; * ch 4, sc in 1st ch of ch-4 (a p made); skip 2 dc, 3 dc in next dc. Repeat from * around, ending with p, join. 4th rnd : Ch 9, dc in 4th ch from hook; make 5 more dc over remaining chain, working over bar of chain rather than into individual ch’s (7-dc group made). * Ch 3 (to count as dc), turn. Dc in next 6 dc; ch 3, turn. Dc in next 6 dc (a square made). Skip 3-dc group and next p of [Pg 13] 3rd rnd, make a d tr in 1st dc of next 3-dc group, ch 3, 6 dc in sp under d tr-bar just made (another 7-dc group). Repeat from * around (8 squares in all). Join with sl st to base of turning ch of 1st square, sl st in next 2 ch sts (this brings work to base of 2nd dc-row of square). 5th rnd : * Ch 5, sc at top of same dc, ch 5, sc in top of turning ch at corner of square, ch 5, skip next dc on other side of square, make sc in next dc, ch 5, skip 1 dc, sc in next dc, ch 5, sc in top of turning ch of 1st row of next square (this is base of 2nd dc-row of square). Repeat from * around, joining last ch-5 at base of 1st loop. 6th rnd : Sl st to center ch of loop, * ch 5, sc in next loop. Repeat from * around, joining last ch-5 to base of 1st loop. 7th rnd : Sl st to center ch of loop, sc in same loop; * in next loop make: 2 dc, 2 tr, ch 3, 2 tr and 2 dc; sc in next loop, thus making a corner. (Ch 5, sc in next loop) 8 times. Repeat from * around, ending with ch 2, dc in 1st sc, to form last loop.

8th rnd : * Dc in next 2 dc, dc in next 2 tr; in ch-3 sp make 3 dc, ch 3 and 3 dc; dc in next 2 tr, dc in next 2 dc, sc in next loop; (ch 5, sc in next loop) 7 times. Repeat from * around, ending with ch 2, dc in dc at end of previous rnd, for last loop. 9th rnd : * Dc in next 7 dc, in corner ch-3 make 3 dc, ch 3 and 3 dc; dc in next 7 dc, sc in next loop, make 6 ch-5 loops. Repeat from * around, ending as before. 10th and 11th rnds : Like 9th rnd, having 3 more dc in each group and 1 loop less on each side, on each rnd— do not count last dc of last loop of previous rnd in 1st dc-group of following rnd . 12th rnd : Like previous rnd, ending with ch 5, sc in dc of last loop of previous rnd. 13th rnd : * Sc in 1st dc of next group; (ch 5, skip 1 dc, sc in next dc) 8 times, ch 5, sc in corner sp, ch 5, skip 2 dc, sc in next dc; (ch 5, skip 1 dc, sc in next dc) 8 times, ch 2, 5 dc in each of next 3 loops, ch 2. Repeat from * around, sl st in sc at base of 1st loop. 14th rnd : Sl st in next 3 ch, sc in loop; * (ch 5, sc in next loop) 17 times; ch 2, dc in next 15 dc, ch 2, sc in ch-5 loop. Repeat from * around, ending with ch 2, sl st in sc at base of 1st loop. 15th rnd : Sl st to center of loop, sc in loop, ** (ch 5, sc in next loop) 16 times; ch 2, * make dc in next 3 dc, holding back on hook last loop of each dc, thread over and draw through all loops at once (a cluster), ch 5. Repeat from * 3 more times, make another cluster, ch 2, sc in next loop. Then repeat from ** around, ending with ch 2, sl st in sc at base of 1st loop. Fasten off.

SECOND BLOCK... Work as for 1st block to 14th rnd incl. 15th rnd : Make 1st 9 loops as on 1st block, ch 2, sl st in corresponding loop on previous block ( always be sure to keep blocks right side up ), ch 2, sc in next loop on block in work, ch 2, sl st in next corresponding loop on 1st block, ch 2, sc in next loop on block in work (2 ch-5 loops joined). Ch 2 and continue thus until 7 joined loops are made, ch 2, cluster over next 3 dc, * ch 2, sl st in ch-5 between next 2 clusters on 1st block, ch 2, cluster over next 3 dc on block in work. Repeat from * to last cluster incl; ch 2, sc in next loop on block in work, ch 2, sl st in next corresponding loop of 1st block. Continue thus until 7 loops in all have been joined following clusters. Complete rnd as for 1st block (no more joinings).

Make necessary number of blocks, joining at all adjacent sides in same manner as 2nd block was joined to 1st (8 loops in all remain free between joinings for fill-in lace to be made later).

FILL-IN LACE... Fill in all spaces between squares as follows: Ch 4, join with sl st to form ring, ch 4, sl st in center ch of a free loop at corner (in space between joinings), * ch 4, sc in ring, ch 4, sl st in center ch of next free loop. Repeat from * until the 8 free loops are joined to center; ending with sc in ring, join. Fasten off.

CLARK’S O.N.T. or J. & P. COATS BEST SIX CORD MERCERIZED CROCHET , size 20 . See thread information on page 22 .

GAUGE : Using the materials recommended, each motif measures 4¼″ in diameter and requires about 30 yds. of thread. Fill-in lace requires about 4 yds.

RECOMMENDED USES: Tablecloths, bedspreads, luncheon sets, chair sets, runners, centerpieces.

MOTIF... Ch 10 and join with sl st to form ring. 1st rnd : Ch 3, 23 dc in ring. Join with sl st to 3rd st of ch-3 first made. 2nd rnd : Ch 10, and complete a cross st as follows: Thread over twice, insert hook in 8th ch from hook, draw thread through (4 loops on hook), thread over once, skip 1 dc and insert hook in next dc, draw thread through (6 loops on hook), thread over, and take off 2 loops at a time, 5 times. * Ch 3, thread over 4 times, insert hook in next dc and draw thread through (6 loops on hook), thread over, and take off 2 loops at a time twice, then thread over, skip 1 dc, insert hook in next, draw thread through (6 loops on hook), thread over, and take off 2 loops at a time, 5 times. Ch 3, dc in center point of the cross, thus completing the cross. Repeat from * until there are 8 cross sts around the circle. Join last ch-3 with sl st to 7th st of ch-10 first made. 3rd rnd : 5 sc in each sp. 4th to 7th rnds incl : Sc in each sc of previous rnd. 8th rnd : Ch 4, dc in 1st sc, * ch 1, dc in next sc, repeat from * to end of rnd. Then ch 1, and join with sl st to 3rd st of ch-4 first made. 9th rnd : Ch 10, and complete cross st as before, skipping 2 dc between each leg of cross st and inserting hook under ch-1 sp. Ch 3 between each cross st. Skip 2 dc between each cross st. Repeat around (20 cross sts) and join last ch-3 with sl st to 7th st of ch-10 first made. 10th rnd : Sl st in 1st 2 sts of 1st sp, ch 5, * dc in same sp, ch 3, sc in next sp, ch 3, dc in next sp, ch 2, repeat from * to end of rnd. Join last ch-3 with sl st to 3rd st of ch-5 first made. 11th rnd : Ch 6, dc in same sp, * ch 4, sc in next sc of previous rnd, ch 4, dc in next ch-2 sp, ch 3, dc in same sp. Repeat from * to end of rnd, joining with sl st to 3rd st of ch-6 first made.

TO JOIN MOTIFS... With over-and-over stitches, sew 3 points of one motif to corresponding 3 points of the adjacent motif (thus leaving 2 points free on each motif). To make fill-in lace between the motifs, ch 4, join with sl st to form ring. ** Ch 15, sc at joining of 2 motifs, ch 15, sc in center ring, * ch 9, sc in point of next scallop, ch 9, sc in center ring, repeat from * once more. Then repeat from ** 3 more times. Fasten off.

CLARK’S O.N.T. or J. & P. COATS BEST SIX CORD MERCERIZED CROCHET , size 20 . See thread information on page 22 .

GAUGE : Using the materials recommended, each motif measures 5″ in diameter and requires approximately 46 yds. of thread. Fill-in requires about 2½ yds.

MOTIF... Starting at center, ch 8, join with sl st. 1st rnd : Ch 5, * dc in ring, ch 2. Repeat from * 6 more times. Join to 3rd st of ch-5 (8 sps). 2nd rnd : Sl st in next sp, ch 5, 4 d tr in same sp, holding back the last loop of each d tr on hook; thread over and draw through all loops on hook (a cluster); * ch 8, 5 d tr in next sp, holding back the last loop of each d tr on hook; thread over and draw through all loops on hook (cluster). Repeat from * around, ending with ch 8, sl st at tip of 1st cluster made. 3rd rnd : 10 sc in each sp (80 sc in rnd). 4th to 7th rnds incl : Sc in each sc, ending 7th rnd with sl st in next st. 8th rnd : * Ch 5, skip 1 st, sc in next st, ch 5, skip 2 sts, sc in next st. Repeat from * around (32 loops). 9th rnd : Sl st to center of next loop, 2 sc in loop, * ch 5, sc in next loop. Repeat from * 2 more times, ch 5, 2 sc in next loop, and continue thus around, ending with sl st in 1st sc made. 10th rnd : Ch 1, sc in next 2 sc, * 2 sc in next loop; (ch 5, sc in next loop) twice, ch 5, 2 sc in next loop, sc in next 2 sc. Repeat from * around, ending with 2 sc in last loop, sl st in ch-1 first made. 11th rnd : Ch 1, sc in next 4 sc, * 2 sc in next loop, ch 5, sc in next loop, ch 5, 2 sc in next loop, sc in next 6 sc. Repeat from * around, ending with sl st in ch-1 first made. 12th rnd : Ch 1, sc in next 6 sc, * 2 sc in next loop, ch 7, 2 sc in next loop, sc in next 10 sc. Repeat from * around, ending rnd as before. 13th rnd : Ch 1, sc in next 8 sc, * in ch-7 loop make 2 sc, ch 5, 2 sc; sc in next 14 sc. Repeat from * around; join. 14th rnd : Ch 1, sc in each sc, making 5 sc in each ch-5 loop; join. 15th rnd : Ch 1, sc in each sc, making 2 sc in center st of 5-sc group; join. 16th rnd : Sc in next sc, ch 6 (to count as dc and ch-3), dc in same place as last sc, * ch 6, skip 5 sc, sc in next sc, ch 6; in center sc at tip of next point make dc, ch 3, dc; ch 6, skip 5 sc, sc in next sc, ch 6, skip 5 sc; in next sc make dc, ch 3, dc. Repeat from * around, joining last ch-6 to 3rd st of ch-6 first made. 17th rnd : Sl st in next ch, sc in sp, ch 6, dc in same sp, * ch 6, sc in next sc, ch 7; in sp at point make dc, ch 3, dc; ch 7, sc in next sc, ch 6; in next sp make dc, ch 3, dc. Repeat from * around. Join and fasten off.

Make necessary number of motifs. With over-and-over stitches sew 3 points at 1 side of motif to corresponding 3 [Pg 14] points of adjacent motifs, thus leaving 1 point free on each motif between joinings.

FILL-IN LACE... Ch 10, join to form ring. * Ch 11, sl st in a free point between joinings; ch 11, sc back in ring. Ch 16, sl st in joining; ch 16, sc in ring. Repeat from * 3 more times. Join and fasten off. Fill in all spaces between joinings in same manner.

Everyone loves a pineapple design! Early American in inspiration, it has the traditional charm of colonial glass.

PINEAPPLE LUNCHEON SET No. 7335

CLARK’S O.N.T. or J. & P. COATS BEST SIX CORD MERCERIZED CROCHET , size 50 :

Clark’s O.N.T. — 11 balls of White or
Ecru or 13 balls of
any color.
OR
J. & P. Coats — 8 balls of White or Ecru
or 11 balls of any color.

These materials are sufficient for a set consisting of centerpiece, 14″ in diameter; 4 place doilies, 12″ in diameter; 4 bread and butter plate doilies, 7″ in diameter; and 4 glass doilies, 5½″ in diameter.

CENTERPIECE... Starting at center, ch 16, join with sl st. 1st rnd : Ch 3, 32 dc in ring, sl st in 3rd st of ch-3. 2nd rnd : Ch 3, dc in each dc around; join to 3rd st of ch-3. 3rd rnd : Ch 3, dc in same place as sl st, 2 dc in each dc around, sl st in 3rd st of ch-3. 4th rnd : Repeat 2nd rnd. 5th rnd : Ch 3, dc in same place as sl st, * ch 3, skip 2 dc, 2 dc in next dc. Repeat from * around, ending with ch 3, join to 3rd st of ch-3 (22 dc-groups). 6th rnd : Sl st in next dc and in next sp, ch 3; in same sp make dc, ch 2 and 2 dc; in each ch-3 sp around make 2 dc, ch 2 and 2 dc; join. 7th rnd : Sl st in next dc and in next ch-2 sp, ch 3, in same sp make dc, ch 2 and 2 dc; * ch 1, in next ch-2 sp make 2 dc, ch 2 and 2 dc (shell over shell). Repeat from * around, ending with ch-1; join.

8th to 12th rnds incl : Repeat 7th rnd, having an extra ch between each shell in each rnd. 13th rnd : Sl st in next dc and in next sp, ch 3; in same sp make dc, ch 5 and 2 dc. * Ch 6, in next ch-2 sp make 2 dc, ch 2 and 2 dc, ch 6; in next ch-2 sp make 2 dc, ch 5 and 2 dc. Repeat from * around; join. 14th rnd : Sl st in next dc and in next sp, ch 4, 12 tr in ch-5 of shell, * ch 5, in next ch-2 make 2 dc, ch 2 and 2 dc; ch 5, 13 tr in ch-5 of next shell. Repeat from * around, ending with ch 5, join.

15th rnd : Ch 5 (to count as tr and ch-1), tr in next tr; (ch 1, tr in next tr) 11 times; * ch 3, shell over next shell, ch 3, tr in next tr; (ch 1, tr in next tr) 12 times. Repeat from * around; join to 4th st of ch-5 first made. 16th rnd : Sl st in 1st ch-1 sp, sc in same sp; * (ch 3, sc in next ch-1 sp) 11 times, ch 3, shell over next shell, ch 3, sc in next ch-1 sp. Repeat from * around, ending with ch 3, sc in 1st ch-3 loop, 17th rnd : (Ch 3, sc in next loop) 10 times, * ch 3, shell over next shell; (ch 3, sc in next loop) 11 times. Repeat from * around, ending as in 16th rnd. 18th rnd : (Ch 3, sc in next loop) 9 times, * ch 3, in ch-2 of next shell make 2 dc, ch 2, 2 dc, ch 2 and 2 dc. (Ch 3, sc in next loop) 10 times. Repeat from * around, ending as before.

19th rnd : (Ch 3, sc in next loop) 8 times, * ch 3, in next ch-2 make a shell, ch 2, shell in next ch-2. (Ch 3, sc in next loop) 9 times. Repeat from * around, ending as before. 20th rnd : (Ch 3, sc in next loop) 7 times, * ch 3, shell over next shell, ch 1, shell in next ch-2 sp, ch 1, shell over next shell; (ch 3, sc in next loop) 8 times. Repeat from * around, ending as before. 21st rnd : (Ch 3, sc in next loop) 6 times; * (ch 3, shell over next shell) 3 times; (ch 3, sc in next loop) 7 times. Repeat from * around, ending as before. 22nd rnd : (Ch 3, sc in next loop) 5 times, * ch 3, shell over next shell; (ch 4, shell over next shell) twice; (ch 3, sc in next loop) 6 times. Repeat from * around.

23rd rnd : (Ch 3, sc in next loop) 4 times; * ch 3, shell over next shell, ch 5; in next shell make 2 dc, ch 5 and 2 dc; ch 5, shell over next shell; (ch 3, sc in next loop) 5 times. Repeat from * around. 24th rnd : (Ch 3, sc in next loop) 3 times; * ch 3, shell over next shell, ch 3, 14 tr in next shell, ch 3, shell over next shell; (ch 3, sc in next loop) 4 times. Repeat from * around. 25th rnd : (Ch 3, sc in next loop) twice; * ch 3, shell over next shell, ch 3, tr in next tr; (ch 1, tr in next tr) 13 times; ch 3, shell over next shell; (ch 3, sc in next loop) 3 times. Repeat from * around.

26th rnd : Ch 3, sc in next loop, * ch 3, shell over next shell; (ch 3, sc in next ch-1 sp) 13 times; ch 3, shell over next shell; (ch 3, sc in next loop) twice. Repeat from * around. 27th rnd : * Ch 4, shell over next shell; (ch 3, sc in next loop) 12 times; ch 3, shell over next shell; ch 4, sc in next loop. Repeat from * around, ending with ch 4, sl st in 1st sc. Fasten off. 28th row : Attach thread to ch-2 of next shell of previous rnd, ch 3; make dc, ch 2 and 2 dc in same shell; (ch 3, sc in next loop) 11 times; ch 3, shell over next shell. Ch 3, turn.

29th row : Shell over shell; (ch 3, sc in next loop) 10 times; ch 3, shell over next shell; ch 3, turn. Continue in this manner, having 1 ch-3 loop less on each row until 36th row is completed. 37th row : Shell over shell; (ch 3, sc in next loop) twice; ch 3, shell over shell— 1 loop remaining at point . Ch 3, turn. Make shell over shell, ch 4, sc in next loop, ch 4, 2 dc in next shell, ch 1, sl st back in ch-2 of last shell; ch 1, 2 dc where last 2 dc were made. Fasten off. Attach thread to ch-2 of next shell of 27th rnd and complete the next point in same manner. Continue until all 11 points have been worked; then work as follows:

1st rnd : Attach thread to tip of one point where shells were joined, ch 3, in same place where ch-3 was joined make dc, ch 2 and 2 dc. * (Ch 3, shell in next turning ch, between 2 rows) 5 times; ch 2, dc in ch-2 of shell preceding ch-4 (on 27th rnd), holding back the last loop of this dc and next dc on hook; dc in ch-2 of next shell (where thread was attached, to work point); thread over and draw through all loops on hook; (ch 3, shell in turning ch between 2 rows) 5 times; ch 3, shell at tip of next point, where shells were joined. Repeat from * around. Join last ch-3 to 3rd st of ch-3. 2nd rnd : Sl st in next dc and in next sp, ch 8, sc in 5th ch from hook (a p made). Dc in same place as sl st, * ch 3, sc under next ch-3, ch 3; in next shell make dc, p and dc. Repeat from * 4 more times, ch 3, sc in next dc, ch 3; in next shell make dc, p and dc. Ch 3, sc under next ch-3. Continue thus around. Fasten off.

PLACE DOILIES (Make 4)... Starting at center ch 12. Join with sl st. 1st rnd : Ch 3 (to count as dc), 26 dc in ring. Join with sl st in 3rd st of ch-3. 2nd rnd : Ch 3, dc in same st as sl st, 2 dc in each st around (54 dc). Join. 3rd to 9th rnds incl : Same as 5th to 11th rnds incl. of centerpiece—18 dc-groups on 3rd rnd. 10th rnd : Same as 13th rnd of centerpiece, making ch-5 (instead of ch-6) between shells. 11th rnd : Same as 14th rnd of centerpiece, making ch-4 (instead of ch-5) between shells and tr-groups (9 tr-groups in rnd). Starting with 15th rnd of centerpiece, work as for centerpiece until place doily is completed.

BREAD and BUTTER PLATE DOILIES (Make 4)... Ch 16, join with sl st. 1st rnd : Ch 3 (to count as dc), 41 dc in ring. 2nd to 5th rnds incl : Same as 5th to 8th rnds of centerpiece— 14 dc-groups on 2nd rnd . 6th rnd : Sl st in next dc and in next sp, ch 3, in same sp make dc, ch 5, 2 dc; * ch 4, shell over next shell, ch 4, in sp of next shell make 2 dc, ch 5 and 2 dc. Repeat from * around. Join. 7th rnd : Sl st in next dc and in next sp, ch 4 (to count as tr), 10 tr in ch-5 sp, * ch 3, shell over shell, ch 3, 11 tr in next ch-5 sp. Repeat from * around, ending with ch 3, join (7 tr-groups in rnd). 8th rnd : Ch 5 ( to count as tr and ch-1 ), tr in next tr; (ch 1, tr in next tr) 9 times; * ch 3, shell over next shell, ch 3, tr in next tr; (ch 1, tr in next tr) 10 times. Repeat from * around; join to 4th st of ch-5 first made.

9th rnd : Same as 16th rnd of centerpiece, making (ch-3, sc in next ch-1 sp) 9 times—instead of 11 times. 10th rnd : (Ch 3, sc in next loop) 8 times, * ch 3, Shell over next shell; (ch 3, sc in next loop) 9 times. Repeat from * around, ending with sl st in sc at base of 1st loop made. Fasten off. Work is now done in [Pg 15] rows. 11th row : Attach thread to ch-2 of next shell of previous rnd, ch 3; make dc, ch 2 and 2 dc in same shell; (ch 3, sc in next loop) 8 times; ch 3, shell over next shell. Ch 3, turn. 12th row : Shell over shell; (ch 3, sc in next loop) 7 times; ch 3, shell over next shell; ch 3, turn. Continue in this manner, having 1 ch-3 loop less on each row until 16th row is completed. 17th row : Same as 37th row of centerpiece. Fasten off. Attach thread to ch-2 of next shell on 10th rnd and complete the next point in same manner. Continue thus until all 7 points have been worked. Then work as follows:

1st rnd : Attach thread to tip of any point where shells were joined, ch 3; in same place where thread was attached make dc, ch 2 and 2 dc. * (Ch 3, shell in next turning ch) 3 times, ch 2, dc in next turning ch, skip next shell, dc under starting ch of next shell, (ch 3, shell in next turning ch) 3 times, ch 3, shell in tip of point, where shells meet. Repeat from * around. Join. 2nd rnd : Sl st in next dc and in next sp, ch 8 (to count as dc and ch-5 for a picot), sc in 5th ch from hook— a p made . Dc in same place as sl st, * ch 3, sc under next ch-3, ch 3; in next shell make dc, p and dc. Repeat from * 2 more times, ch 3, sc between next 2 dc, ch 3; in next shell make dc, p and dc. Ch 3, sc under next ch-3. Continue thus around. Join and fasten off.

GLASS DOILIES (Make 4)... Starting at center, ch 8. Join. 1st rnd : Ch 3, 19 dc in ring. Join. 2nd rnd : Ch 3, dc in same place as sl st, * ch 2, skip 1 dc, 2 dc in next dc. Repeat from * around, ending with ch 2, sl st in 3rd st of ch-3 first made (10 dc-groups). 3rd rnd : Sl st in next dc and in next sp, ch 3. In same sp make dc, ch 2 and 2 dc, * ch 3, shell in next sp. Repeat from * around, ending with ch 3, sl st in top st of ch-3 first made. 4th rnd : Ch 3; in same sp make dc, ch 5 and 2 dc, * ch 4, shell in sp of next shell, ch 4. In sp of next shell make 2 dc, ch 5 and 2 dc. Repeat from * around, ending with ch 4, sl st in top st of ch-3 first made. 5th rnd : Same as 7th rnd of bread and butter plate doily (5 tr-groups in rnd). Work remainder of this doily as for bread and butter plate doily. Block all pieces to measurements given.

ROYAL PINEAPPLE No. 7275-M

CLARK’S O.N.T. or J. & P. COATS BEST SIX CORD MERCERIZED CROCHET , size 30 :

Clarks’s O.N.T. — 4 balls of White or
Ecru, or 6 balls of
any color.
OR

J. & P. Coats — 3 balls of White or Ecru,
or 4 balls of any
color.

Clark’s O.N.T. — 2 balls of White or Ecru .
OR
J. & P. Coats — 2 balls of White, Ecru or any color .

Work as for Centerpiece of No. 7335 (see page 14 ), to 27th rnd incl., but do not fasten off. 28th rnd : Sl st to sp of shell, ch 3, dc in same place, ch 2, 2 dc in same place, * (ch 3, sc in next loop) 11 times; ch 3, shell over next shell, ch 3, shell over next shell. Repeat from * around, ending with ch 3, join to top of ch-3 first made. 29th rnd : Sl st to sp of shell, ch 3, dc in same place, ch 2, 2 dc in same place, * (ch 3, sc in next loop) 10 times; ch 3, shell over next shell, ch 1, shell into next ch-3 sp, ch 1, shell over next shell. Repeat from * around. Join.

30th rnd : Make a shell, then * (ch 3, sc in next loop) 9 times; (ch 3, shell over next shell) 3 times. Repeat from * around. Join. 31st rnd : Shell, then * (ch 3, sc in next loop) 8 times; ch 3, shell over shell, (ch 4, shell over next shell) twice. Repeat from * around. Join. 32nd rnd : Shell, * (ch 3, sc in next loop) 7 times; ch 3, shell over shell, ch 5, in next shell make 2 dc, ch 6 and 2 dc; ch 5. shell over shell. Repeat from * around. 33rd rnd : Shell, * (ch 3. sc in next loop) 6 times; ch 3, shell over shell, ch 3, in ch-6 loop make 16 tr, ch 3, shell over shell. Repeat from * around (3rd rnd of pineapples started). Continue to work around until only 1 loop remains at top of 2nd rnd of pineapples. Next rnd : Shell, * ch 4, sc in next loop, ch 4, shell, ch 4, sc in next loop, (ch 3, sc in next loop) 11 times; ch 4, shell over shell. Repeat from * around. Join. Then work as follows: 1st row : Ch 3, turn. Work shell over last shell, ch 4, sc in next loop, (ch 3, sc in next loop) 10 times; ch shell over shell. Ch 3, turn. 2nd row : Shell over shell, ch 4, sc in next loop, (ch 3, sc in next loop) 9 times; ch 4, shell over shell. Ch 3, turn. Continue in this manner, having 1 ch-3 loop less on each row until 1 loop remains at top of pineapple. Ch 3, turn. Next row : Make shell over shell, ch 4, sc in loop, ch 4, 2 dc in next shell, ch 1, sl st back in ch-2 of last shell, ch 1, 2 dc where last 2 dc were made. Fasten off. Attach thread to 1st shell of next pineapple and complete the point in same manner. Continue thus until all 11 points have been worked.

No chair set designs have ever been more popular than these ... the old-fashioned Flower Basket and the distinctive Chariot Wheel motif.

CHARIOT WHEEL No. 7035

CLARK’S O.N.T. or J. & P. COATS BEST SIX CORD MERCERIZED CROCHET , size 10 . See thread information on page 22 .

GAUGE : Using the materials recommended, each motif measures about 3″ from end of spoke to end of opposite spoke, and requires approximately 12½ yds. of thread.

RECOMMENDED USES: Chair sets, runners, luncheon sets, centerpieces, tablecloths.

MOTIF... Starting at center, ch 12, join with sl st to form ring. 1st row : Ch 21 (to measure 1¾″). Sc in 2nd ch from hook and in each ch across (20 sc). Make 1 sc in ring. Ch 1, turn. 2nd row : Picking up only the back loop of each sc, skip 1st sc, sc in each of next 20 sc. Ch 1, turn. 3rd row : Picking up only the back loop of each sc, sc in each of next 4 sc, * ch 5, sc in each of next 4 sc. Repeat from * across, ending with 4 sc (4 p’s made). Make 1 sc in ring. This completes 1st spoke. Do not break off but continue for 2nd spoke.

Second Spoke... 1st row : Ch 20, drop loop from hook, insert hook in 2nd p from ring and draw dropped loop through. Sc in each st of ch-20 (20 sc). Make 1 sc in ring. Ch 1, turn. Repeat 2nd and 3rd rows of 1st spoke once. Then make 4 more spokes same as 2nd spoke (6 in all), but while making the 3rd p of the 6th spoke, attach to 1st spoke by making ch 2, sl st in end sc of 1st spoke, ch 2, and continue back on 6th spoke as usual. Fasten and break off. This completes motif.

Joining... Place motifs in position as in illustration, and pin ends of spokes together. Then sew them together on wrong side with over-and-over stitches.

Chair set requires 28 motifs (rows of 6 motifs and 5 motifs alternately). Arm piece requires 13 motifs (a row of 5 motifs for center and a row of 4 motifs along each side of center row).

J. & P. COATS KNIT-CRO-SHEEN , 2 balls of White or Ecru, or 3 balls of any color .

NOTE : The design is worked from the side across and not from the bottom. In the directions 1 sp refers to 1 dc, ch 2, 1 dc; in making a block, substitute 2 dc for the ch-2. To make the curved meshes that form the basket part of the design, make ch 3, 1 sc, ch 3.

CHAIR BACK... To begin, ch 110. 1st row : Starting in the 8th ch from hook, make a row of sps (35 sps). 2nd row : Make 35 sps. 3rd row : Make 2 sps, 1 bl, 2 sps, 5 bls, 2 sps, 1 bl, 2 sps, 5 bls, 2 sps, 1 bl, 2 sps, 5 bls, 2 sps, 1 bl, 2 sps. 4th row : Make 3 sps, 2 bls, 5 sps, 2 bls, 1 sp, 2 bls, 5 sps, 2 bls, 1 sp, 2 bls, 5 sps, 2 bls, 3 sps. 5th row : Make 3 sps, 1 bl, 27 sps, 1 bl, 3 sps. 6th row : Make 2 sps, 1 bl, 29 sps, 1 bl, 2 sps. 7th row : Make 2 sps, 1 bl, 5 sps, 2 bls, 22 sps, 1 bl, 2 sps. 8th row : 2 sps, 1 bl, 21 sps, 1 bl; make ch 3, skip 2 dc; make 1 sc in next dc. Make ch 3, skip 2 dc, make 1 bl, 4 sps, 1 bl, 2 sps. 9th row : Make 2 sps, 1 bl, 4 sps, 1 bl, ch 5, bl in bl, 21 sps, 1 bl, 2 sps. From this point it will be easy enough to follow chart on page 16 . Finish outer edge with sc and a ch-3 p over every other dc.

Four popcorn designs to delight the crochet fancier. Ever popular, these designs have an authentic heirloom quality.

PINWHEEL POPCORN No. 682

GAUGE : Using the materials recommended, each motif measures 6″ across, from side to side, and requires about 70 yds. of thread. Allow about 3 or 4 balls for bedspread fringe.

MOTIF... Starting at center, ch 12, join with sl st. 1st rnd : Ch 3, 23 dc in ring. Join to 3rd st of ch-3. 2nd rnd : Ch 3, 4 dc in same place as sl st; drop st from hook, insert hook back in 3rd st of ch-3 first made and draw loop through the one on hook (a pc st). * Ch 5, skip 2 dc, dc in next dc, ch 3, [Pg 19] 5 dc in next dc; drop st from hook, insert hook back in last ch made and draw loop through the one on hook (a pc st). Repeat from * around, ending with ch 2, sl st at tip of first pc st made. 3rd rnd : Sl st in ch-5 sp, ch 3 and complete a pc st; * ch 2, a pc st, ch 5, dc in next sp, ch 2, a pc st. Repeat from * around, ending with ch 2, sl st at tip of 1st pc st made. 4th rnd : Sl st in next sp (between pc sts), ch 3 and complete a pc st; * ch 2, in next ch-5 sp make 2 pc sts with ch-2 between; ch 5, dc in next sp, ch 2, pc st in sp between 2 pc sts. Repeat from * around, ending as before. 5th and 6th rnds : Same as 4th rnd, making pc sts between pc sts of previous rnd and 2 pc sts in ch-5 sp, always making ch-2 between pc sts (4 pc sts in each group on 5th rnd; 5 pc sts in each group on 6th rnd). 7th rnd : Sl st in next sp (between 1st 2 pc sts), ch 3 and complete a pc st; * (ch 2, pc st between next 2 pc sts) 3 times; ch 3, dc at tip of next pc st, ch 3, dc in ch-5 sp, ch 3, dc in next sp, ch 2, pc st between next 2 pc sts. Repeat from * around. Join. 8th rnd : * 3 pc sts between pc sts of previous rnd, with ch-2 between; ch 3, dc at tip of next pc st; (ch 3, dc in next sp) 4 times; ch 2 and repeat from * around. Join. 9th rnd : * 2 pc sts between pc sts of previous rnd, with ch-2 between; ch 3, dc at tip of next pc st; (ch 3, dc in next sp) 6 times, ch 2. Repeat from * around. Join. 10th rnd : Sl st in sp (between pc sts), ch 3 and complete a pc st; * (ch 3, dc in next sp) 3 times; ch 3, skip next dc and sp; in next dc make 3 tr, ch 3, 3 tr; ch 3, skip next sp and dc; dc in next sp; (ch 3, dc in next sp) twice, ch 2, pc st between pc sts of previous rnd. Repeat from * around. Join and fasten off.

Make necessary number of motifs and sew together on wrong side with neat over-and-over stitches.

OCTAGON POPCORN
No. 213

GAUGE : Using the materials recommended, each block measures about 5″ square and requires about 65 yds. of thread.

1st rnd : Ch 6, 7 dc in ring with ch 3 between each dc. Ch 3, join in 3rd st of ch-6. 2nd rnd : Ch 3, 4 dc over each ch-3 and 1 dc in every dc; join in 3rd st of ch-3. 3rd rnd : Ch 3, 1 dc in same st from which ch-3 was started. 1 dc in each of next 3 dc (catching the hook in back loop only throughout block), * ch 2, skip 1 dc, 2 dc in next dc, 1 dc in each of next 3 dc. Repeat from * until there are 8 groups of dc. Ch 2 and join with sl st in 3rd ch of ch-3 of previous rnd. 4th rnd : Ch 3, 1 dc in same st from which ch-3 was started, * 1 dc in next dc, 1 popcorn st as follows: ch 1, 5 dc in next dc, drop st from hook, insert hook back in ch-1, pick up dropped loop and draw it through st on hook. 1 dc in next dc, 2 dc in next dc. Ch 3, skip ch-2 of preceding rnd, 2 dc in next dc. Repeat from * until 8 groups are made; then ch 3 and join in 3rd st of ch-3 of previous rnd.

5th rnd : Ch 3, 1 dc in same st from which ch-3 was started, * dc in next 5 dc, 2 dc in next dc, ch 3, skip ch-3, 2 dc in next dc. Repeat from * until 8 groups are completed. Then ch 3 and join in 3rd st of ch-3 of previous rnd. 6th rnd : Ch 3, 1 dc in same st from which ch-3 was started, * 1 dc in next dc, 1 popcorn st in next dc, 1 dc in each of next 3 dc, 1 popcorn st, 1 dc in next dc, 2 dc in next dc. Ch 4, skip ch-3, 2 dc in next dc and repeat from *. Continue for the 8 groups. 7th rnd : Ch 3, 1 dc in same st from which ch-3 was started, * dc in next 9 dc, 2 dc in next dc, ch 4, skip ch-4, 2 dc in next dc. Repeat from *, completing the 8 groups. Ch 4 and join.

8th rnd : Ch 3, 1 dc in same st from which ch-3 was started, * 1 dc in next dc, 1 popcorn st in next dc, dc in next 3 dc, 1 popcorn st in next dc, 1 dc in each of next 3 dc, 1 popcorn st in next dc, 1 dc in next dc, 2 dc in next dc. Ch 5, skip ch-4; 2 dc in next dc. Repeat from * and complete 8 groups. Ch 5, and join.

9th rnd : Ch 3, 1 dc in same st from which ch-3 was started. * 1 dc in each of next 13 dc, 2 dc in next dc. Ch 5, skip ch-5, 2 dc in next dc, dc in next 11 dc, ch 4 and turn. 1 tr in 4th dc from hook, ch 9, 1 tr in same st, ch 4, skip 4 dc, 1 sl st in next dc, ch 1, turn. 4 sc over ch-4, ch 1, 5 sc over ch-9, ch 4, 5 sc over same ch-loop, ch 1, 4 sc over next ch-4, 1 sl st in the 2 loops of the last dc, dc in next 2 dc, 2 dc in next dc. Ch 5, skip ch-5, 2 dc in next dc. Repeat from * and complete 8 groups. Entire outer edge of spread should be finished with the scalloped edge. These can be made as the outer block is crocheted.

Make as many blocks as desired and sl st blocks together on wrong side of work across the 17 dc to middle of ch-5. Join scallops with needle and thread, sewing the p’s together.

IRISH CROCHET POPCORN
No. 60

GAUGE : Using the materials recommended, each block measures 5″ square and requires about 57 yds. of thread. About 3 balls are required for bedspread edging and fringe.

BLOCK... To begin, ch 8, join with sl st to form ring. 1st rnd : Ch 1, 12 sc in ring. Join with sl st in 1st sc. 2nd rnd : * Ch 5, skip 1 sc, sc in next sc. Repeat from * until there are 6 loops. Join last ch 5 in sc of 1st loop. 3rd rnd : Over each ch-5 work sc, half dc, 5 dc, 1 half dc, 1 sc. 4th rnd : Ch 5, fasten with sc on back of preceding row between two petals, ch 5, fasten as before. Repeat around 6 petals. 5th rnd : Over each ch-5 work sc, half dc, dc, 5 tr, 1 dc, 1 half dc, 1 sc.

6th rnd : Sl st in each of 1st 3 sts of 1st petal made in this row, sc in 1st tr, * ch 9, sc in 5th tr, ch 4, sc in same st forming a p, ch 7, 1 sc and 1 p in 1st tr of next petal, ch 7, 1 sc and 1 p in 5th tr, ch 9, 1 sc and 1 p in 1st tr of next petal, ch 7, 1 sc and 1 p in 5th tr of same petal, ch 7, 1 sc and 1 p in 1st tr of next petal, and repeat from * once. 7th rnd : Sl st to middle of ch-9 loop, * ch 7, sc in same st from which ch-7 started, ch 7, 1 sc and 1 p in center of next ch-7 loop of preceding row, ch 7, 1 sc and 1 p in center of next ch-7 loop, ch 7, sc in center of ch-9. Repeat from * 3 times.

8th rnd : Sl st to middle of 1st ch-7 loop, ch 8, dc in same st from which ch-8 started, * ch 6, sc and 1 p in center of ch of preceding rnd, ch 7, 1 sc and 1 p in center of next ch-7, ch 7, 1 sc and 1 p in center of next ch-7, ch 6, dc in center of next ch-7 loop, ch 5, dc in same st from which ch-5 started and repeat from * 3 times, ending rnd with sl st (instead of dc) in 3rd st of ch-8. 9th rnd : Ch 3, * dc in each of next 2 sts, ch 5, dc in same st as previous dc, dc in each of the next 2 sts, 1 popcorn st in next st as follows: ch 1, 5 dc in next dc, drop st from hook, insert hook back in ch-1 and draw dropped loop through the one on hook. Dc in each of next 3 sts, ch 6, 1 sc and p in center of ch loop of preceding rnd, ch 7, 1 sc and 1 p in center of next ch loop, ch 6, dc in each of last 3 sts of next ch-6, popcorn st in next dc, dc in next st. Repeat from * 3 times, ending row with a popcorn st and sl st in 3rd st of ch-3 first made.

10th rnd : Ch 3, * dc in next dc, 1 popcorn st, dc in each of next 3 sts, ch 5, 1 dc in same st for corner. Work in next 12 sts as follows: 2 dc, 1 popcorn st, 5 dc, 1 popcorn st, 3 dc (catching hook in back loop only throughout block), ch 6, 1 sc and 1 p in center of next ch-loop, ch 6, dc in center of next ch-loop, 2 dc, 1 popcorn st, 5 dc, 1 popcorn st, 4 dc. Repeat from * 3 times, ending rnd by sl st in 3rd st of ch-3 first made. 11th rnd : Ch 3, * 4 dc, 1 popcorn st, 3 dc, ch 5, 1 dc in same st for corner. Work across next 18 sts—2 dc, 1 popcorn st, 5 dc, 1 popcorn st, 5 dc, 1 popcorn st, 3 dc. Ch 5, dc in center of next ch-loop, 2 dc, 1 popcorn st, 5 dc, 1 popcorn st, 1 dc and repeat from * 3 times, ending rnd with popcorn st and sl st in 3rd st of ch-3 first made.

12th rnd : Ch 3, dc in each st to corner, ch 5, 1 dc in same st for corner; then 1 dc in each st, making corners as before. Join with sl st in 3rd st of ch-3 first made. Do not fasten off.

Work loops around block as follows: Ch 3, skip 2 sts, sc in next st. Continue around entire block with ch 3 and sc so that there are 18 loops on each side and an additional loop at each corner.

TO JOIN BLOCKS... Catch with sc on ch-3 nearest the edge, ch 3, catch with sc in same position on 2nd block, ch 3, 1 sc on next ch-3 of 1st block, ch 3, catch on 2nd block and so on along one side.

OUTER EDGE... 1st rnd : Make ch 7 and sc in alternate ch-3’s. 2nd rnd : Ch 7 and 1 p in each loop.

FRINGE... For fringe knot 6 strands of cotton into each loop all around bedspread.

MATCHING SET
No. 7165

J. & P. COATS KNIT-CRO-SHEEN. 2 balls of a light color and 3 balls of a dark color for runner; 2 balls of a light color and 2 balls of a dark color for chair set.

Starting at short side, with dark color make a chain about 15″ long. 1st row : Dc in 4th ch from hook, dc in each ch across until there are 141 dc in the row, counting turning ch as 1 dc. Cut off remaining chain. Ch 3, turn. 2nd, 3rd and 4th rows : Dc in each dc across. Ch 3, turn. Do not ch 3 to turn at end of 4th row, but leave the last 2 loops of last dc on hook, attach light color and draw through the 2 loops. Ch 3, turn. 5th row : Holding dark color at top of previous row and working over it in order to conceal it, make dc in each of 2 dc, leaving the last 2 loops of 2nd dc on hook; * drop light color, pick up dark color, and draw through the 2 loops on hook; then, holding light color at top of previous row and working over it, make dc in each of next 3 dc, leaving the last 2 loops of last dc on hook. Drop dark color, pick up light color and draw through the 2 loops on hook; then, holding dark color at top of previous row and working over it, make dc in each of next 3 dc, leaving last 2 loops on hook. Repeat from * across, ending with 3 light dc. Ch 3, turn. 6th row : Dc in each dc across, concealing dark color as before. Hereafter follow chart for runner, beginning at 7th row from bottom and working until 17 rows are completed, concealing unused color as before (count 3 dc for each square). Break off light color and continue with dark color, making dc in each dc across for 3 more rows. Hereafter follow chart, starting at the 21st row from bottom, and work to top of chart, but carry light color only as far as necessary to continue pattern on next row. Then reverse the design by working back to the 1st row. Fasten and break off.

FRINGE... Cut 5 strands of light color, each 10″ long. Double these strands, forming a loop. Pull loop through last dc made, and draw loose ends of fringe through this loop. Pull tight. Make fringe in every 4th dc across short side only. Trim ends evenly. Finish opposite end to correspond.

Completed chair back measures about 10″ x 16″, and each arm piece about 8″ x 9″, omitting fringe.

CHAIR BACK... Starting at bottom, with dark color make a chain about 18″ long. 1st row : Dc in 4th ch from hook, dc in each ch across until there are 171 dc in the row, counting turning ch as 1 dc. Cut off remaining chain. Ch 3, turn. 2nd and 3rd rows : Dc in each dc across. Ch 3, turn. Do not ch 3 to turn at end of 3rd row, but leave the last 2 loops of last dc on hook, attach light color and draw through the 2 loops. Ch 3, turn. Hereafter follow chart for chair back, starting at the 4th row from bottom, and work to top of chart, always concealing unused color as in Runner 7165-A.

ARM PIECES... Starting at bottom, ch 83 (to measure about 9″), and follow chart for arm piece (working as for chair back). Make fringe at lower edge as for chair back.

SIX POINTED STAR
No. 210

GAUGE : Using the materials recommended, each block measures 7½″ across and requires about 90 yds. of thread. About 4 balls are required for bedspread fringe.

BLOCK... Slight cupping of block, which is unavoidable, will be taken care of by blocking. Starting at center, ch 4. 1st rnd : Ch 3, 11 dc in ring. Sl st in 3rd st of ch-3 first made. 2nd rnd : Ch 3, * dc in next dc; in next dc make dc, ch 3 and dc. Repeat from * around, ending with dc at base of ch-3 first made, ch 3, sl st in 3rd st of ch-3. Hereafter pick up only the back loop of each dc. 3rd rnd : Ch 3, dc in next 2 dc, * dc in next ch, ch 4, skip 1 ch, dc in next ch, dc in next 3 dc. Repeat from * around, ending with dc in last ch of previous rnd, sl st in 3rd st of ch-3 first made. 4th rnd : Ch 3, dc in next 3 dc, * dc in next ch, ch 4, skip 2 ch, dc in next ch, dc in next 5 dc. Repeat from * around, ending with dc in last dc of previous rnd, sl st in 3rd st of ch-3 first made. 5th rnd : Ch 3 (to count as dc), * in next st make a pc st— to make a pc st, ch 1, make 5 dc in same place, drop loop from hook, insert hook in ch-1 preceding the 5 dc, and draw dropped loop through ; dc in next 3 dc, dc in next ch, ch 4, skip 2 ch, dc in next ch, dc in next 3 dc. Repeat from * around. Join as before to 3rd st of ch-3 first made.

6th rnd : Ch 3, * dc in tip of next pc st, dc in next 4 dc, dc in next ch, ch 4, skip 2 ch, dc in next ch, dc in next 4 dc. Repeat from * around. Join. 7th rnd : Ch 3, dc in next 2 dc, pc st in next dc, * dc in next 3 dc, dc in next ch, ch 4, skip 2 ch, dc in next ch; (dc in next 3 dc, pc st in next dc) twice. Repeat from * around. Join. 8th rnd : Ch 3, dc in next 7 sts, * dc in next ch, ch 4, skip 2 ch, dc in next ch, dc in next 13 sts. Repeat from * around. Join. 9th rnd : Ch 3, * (pc st in next dc, dc in next 3 dc) twice; dc in next ch, ch 4, skip 2 ch, dc in next ch, dc in next 3 dc, pc st in next dc, dc in next 3 dc. Repeat from * around. Join. 10th rnd : Ch 3, dc in next 8 sts, * ch 3, skip 1 dc, 3 dc in next sp, ch 3, skip 1 dc, dc in each of next 15 sts. Repeat from * around. Join.

11th rnd : Ch 3, dc in next 2 dc, * pc st in next dc, dc in next 4 dc, ch 3, skip 1 dc, dc in next 3 ch, ch 3, skip 3 dc, dc in next 3 ch, ch 3, skip 1 dc, dc in next 4 dc, pc st in next dc, dc in next 3 dc. Repeat from * around. Join. 12th rnd : Ch 3, dc in next 6 dc, * ch 3, skip 1 dc, dc in next 3 ch, ch 3, dc in center st of next ch-3, ch 3, skip 4 sts, dc in next 3 ch, ch 3, skip 1 dc, dc in next 11 dc. Repeat from * around. Join. 13th rnd : Ch 3, * pc st in next dc, dc in next 4 dc, ch 3, skip 1 dc, dc in next 3 ch, ch 3, skip 4 sts, (dc in center st of next ch-3, ch 3) twice; skip 4 sts, dc in [Pg 22] next 3 ch, ch 3, skip 1 dc, dc in next 4 dc. Repeat from * around. Join. 14th rnd : Ch 3, dc in next 4 dc, * ch 3, skip 1 dc, dc in next 3 ch, ch 3, dc in center st of next ch-3, ch 3, skip 2 sts, dc in next 3 ch, ch 3, skip 2 sts, dc in center st of next ch-3, ch 3, skip 4 sts, dc in next 3 ch, ch 3, skip 1 dc, dc in next 7 dc. Repeat from * around. Join.

15th rnd : Ch 3, dc in next 3 dc, * ch 3, skip 1 dc, dc in next 3 ch, ch 3, skip 4 sts, dc in center st of next ch-3, ch 3, skip 2 sts, dc in next 3 ch, ch 3, skip 3 dc, dc in next 3 ch, ch 3, skip 2 sts, dc in center st of next ch-3, ch 3, skip 4 sts, dc in next 3 ch, ch 3, skip 1 dc, dc in next 5 dc. Repeat from * around. Join. 16th rnd : Ch 3, dc in next 2 dc, * ch 3, skip 1 dc, dc in next 3 ch, ch 3, skip 4 sts, dc in center st of next ch-3, ch 3, skip 2 sts, dc in next 3 ch, ch 3, skip 3 dc and 1 ch; in next ch make 3 dc, ch 3 and 3 dc; ch 3, skip 3 dc, dc in next 3 ch, ch 3, skip 2 sts, dc in center st of next ch-3, ch 3, skip 4 sts, dc in next 3 ch, ch 3, skip 1 dc, dc in next 3 dc. Repeat from * around. Join.

Whip blocks together on wrong side and, when desired size is obtained, make ch-4 loops all around bedspread. Knot 1 fringe in each loop, using 8 strands.

THREAD INFORMATION

Each type of thread is adaptable to a wide variety of uses. If you prefer to use a thread other than that specified, the following chart will be of assistance.

Mercerized Crochet : Size 10 or 20—Hooks No. 7 to 9
Sizes 30 to 50—Hooks No. 10 to 12
Knit-Cro-Sheen , Bedspread Cotton , “ Brita-Sheen ”: Hooks No. 6 to 8
Pearl Cotton : Hooks No. 4 to 7
“Brilliant” : Hooks No. 6 to 8

SIMPLE CROCHET STITCHES

1 ... Single Crochet (sc) : Insert hook under 2 loops of st, draw thread through (2 loops on hook), thread over, draw through both loops on hook.

2 ... Double Crochet (dc) : Thread over, insert hook in st and draw thread through (3 loops on hook); thread over, draw through 2 loops, thread over, draw through 2 remaining loops. Work Half Double Crochet (half dc) like dc, but draw thread through all 3 loops at once.

3 ... Treble (tr) : Thread over twice, insert hook in st and draw thread through (4 loops on hook); thread over and work off 2 loops at a time as for a dc. For a Double Treble (d tr) , thread over 3 times; and for a Triple Treble (tr tr) , thread over 4 times, working off 2 loops at a time as in the tr.

GAUGE... For perfect results your number of stitches and rows should correspond with that in the directions. Before starting your article, make a small sample of the stitch. If your working tension is too tight or too loose, use a finer or coarser needle, to obtain the correct gauge.

BLOCKING DIRECTIONS... Using rust-proof pins, pin individual pieces right-side-down on Turkish towels. Press with a hot iron, through a damp cloth. When thoroughly dry, remove pins.

TO LAUNDER COTTON ARTICLES... Before laundering, record all important measurements. Use a good neutral soap or soap flakes; make suds in warm water. Squeeze suds through article until it is clean. Rinse thoroughly and wring out. Lay out article on Turkish towels, according to recorded measurements, and pin in place with rust-proof pins. Press through dry cloth. When thoroughly dry, remove pins. Press lightly where necessary.

IMPORTANT... Be sure to buy at one time sufficient material of the same dye lot to complete the article you wish to make, as it is impossible to avoid slight variations in colors in different dye lots.

ABBREVIATIONS FOR CROCHET

* (asterisk) When this symbol appears, continue working until instructions refer you back to this symbol.

Here They Come!

CROCHET FASHIONS
FOR SMALL FRY No. 175

SHAGGY AND CROCHETED
RUGS No. 177

WOOLIES FOR BABIES No. 178

CROCHETED TABLECLOTHS AND
LUNCHEON SETS No. 179

CHAIR SETS No. 181

TATTING No. 183

A whole new series of crochet books is making crochet history—and crocheters the country over are sitting up and taking notice of these sprightly new books. These books put crochet decidedly in fashion. They show you how you can make charming things for yourself, decorative articles for your home—books no true lover of crochet would want to be without! You’ll want the whole series and you can find them at your favorite art goods department—they’re 10 cents a copy.

*** END OF THE PROJECT GUTENBERG EBOOK OLD AND NEW FAVORITES ***

Updated editions will replace the previous one—the old editions will be renamed.

Creating the works from print editions not protected by U.S. copyright law means that no one owns a United States copyright in these works, so the Foundation (and you!) can copy and distribute it in the United States without permission and without paying copyright royalties. Special rules, set forth in the General Terms of Use part of this license, apply to copying and distributing Project Gutenberg™ electronic works to protect the PROJECT GUTENBERG™ concept and trademark. Project Gutenberg is a registered trademark, and may not be used if you charge for an eBook, except by following the terms of the trademark license, including paying royalties for use of the Project Gutenberg trademark. If you do not charge anything for copies of this eBook, complying with the trademark license is very easy. You may use this eBook for nearly any purpose such as creation of derivative works, reports, performances and research. Project Gutenberg eBooks may be modified and printed and given away—you may do practically ANYTHING in the United States with eBooks not protected by U.S. copyright law. Redistribution is subject to the trademark license, especially commercial redistribution.

START: FULL LICENSE

PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK

To protect the Project Gutenberg™ mission of promoting the free distribution of electronic works, by using or distributing this work (or any other work associated in any way with the phrase “Project Gutenberg”), you agree to comply with all the terms of the Full Project Gutenberg™ License available with this file or online at www.gutenberg.org/license.

Section 1. General Terms of Use and Redistributing Project Gutenberg™ electronic works

1.A. By reading or using any part of this Project Gutenberg™ electronic work, you indicate that you have read, understand, agree to and accept all the terms of this license and intellectual property (trademark/copyright) agreement. If you do not agree to abide by all the terms of this agreement, you must cease using and return or destroy all copies of Project Gutenberg™ electronic works in your possession. If you paid a fee for obtaining a copy of or access to a Project Gutenberg™ electronic work and you do not agree to be bound by the terms of this agreement, you may obtain a refund from the person or entity to whom you paid the fee as set forth in paragraph 1.E.8.

1.B. “Project Gutenberg” is a registered trademark. It may only be used on or associated in any way with an electronic work by people who agree to be bound by the terms of this agreement. There are a few things that you can do with most Project Gutenberg™ electronic works even without complying with the full terms of this agreement. See paragraph 1.C below. There are a lot of things you can do with Project Gutenberg™ electronic works if you follow the terms of this agreement and help preserve free future access to Project Gutenberg™ electronic works. See paragraph 1.E below.

1.C. The Project Gutenberg Literary Archive Foundation (“the Foundation” or PGLAF), owns a compilation copyright in the collection of Project Gutenberg™ electronic works. Nearly all the individual works in the collection are in the public domain in the United States. If an individual work is unprotected by copyright law in the United States and you are located in the United States, we do not claim a right to prevent you from copying, distributing, performing, displaying or creating derivative works based on the work as long as all references to Project Gutenberg are removed. Of course, we hope that you will support the Project Gutenberg™ mission of promoting free access to electronic works by freely sharing Project Gutenberg™ works in compliance with the terms of this agreement for keeping the Project Gutenberg™ name associated with the work. You can easily comply with the terms of this agreement by keeping this work in the same format with its attached full Project Gutenberg™ License when you share it without charge with others.

1.D. The copyright laws of the place where you are located also govern what you can do with this work. Copyright laws in most countries are in a constant state of change. If you are outside the United States, check the laws of your country in addition to the terms of this agreement before downloading, copying, displaying, performing, distributing or creating derivative works based on this work or any other Project Gutenberg™ work. The Foundation makes no representations concerning the copyright status of any work in any country other than the United States.

1.E. Unless you have removed all references to Project Gutenberg:

1.E.1. The following sentence, with active links to, or other immediate access to, the full Project Gutenberg™ License must appear prominently whenever any copy of a Project Gutenberg™ work (any work on which the phrase “Project Gutenberg” appears, or with which the phrase “Project Gutenberg” is associated) is accessed, displayed, performed, viewed, copied or distributed:

This eBook is for the use of anyone anywhere in the United States and most other parts of the world at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this eBook or online at www.gutenberg.org . If you are not located in the United States, you will have to check the laws of the country where you are located before using this eBook.

1.E.2. If an individual Project Gutenberg™ electronic work is derived from texts not protected by U.S. copyright law (does not contain a notice indicating that it is posted with permission of the copyright holder), the work can be copied and distributed to anyone in the United States without paying any fees or charges. If you are redistributing or providing access to a work with the phrase “Project Gutenberg” associated with or appearing on the work, you must comply either with the requirements of paragraphs 1.E.1 through 1.E.7 or obtain permission for the use of the work and the Project Gutenberg™ trademark as set forth in paragraphs 1.E.8 or 1.E.9.

1.E.3. If an individual Project Gutenberg™ electronic work is posted with the permission of the copyright holder, your use and distribution must comply with both paragraphs 1.E.1 through 1.E.7 and any additional terms imposed by the copyright holder. Additional terms will be linked to the Project Gutenberg™ License for all works posted with the permission of the copyright holder found at the beginning of this work.

1.E.4. Do not unlink or detach or remove the full Project Gutenberg™ License terms from this work, or any files containing a part of this work or any other work associated with Project Gutenberg™.

1.E.5. Do not copy, display, perform, distribute or redistribute this electronic work, or any part of this electronic work, without prominently displaying the sentence set forth in paragraph 1.E.1 with active links or immediate access to the full terms of the Project Gutenberg™ License.

1.E.6. You may convert to and distribute this work in any binary, compressed, marked up, nonproprietary or proprietary form, including any word processing or hypertext form. However, if you provide access to or distribute copies of a Project Gutenberg™ work in a format other than “Plain Vanilla ASCII” or other format used in the official version posted on the official Project Gutenberg™ website (www.gutenberg.org), you must, at no additional cost, fee or expense to the user, provide a copy, a means of exporting a copy, or a means of obtaining a copy upon request, of the work in its original “Plain Vanilla ASCII” or other form. Any alternate format must include the full Project Gutenberg™ License as specified in paragraph 1.E.1.

1.E.7. Do not charge a fee for access to, viewing, displaying, performing, copying or distributing any Project Gutenberg™ works unless you comply with paragraph 1.E.8 or 1.E.9.

1.E.8. You may charge a reasonable fee for copies of or providing access to or distributing Project Gutenberg™ electronic works provided that:

• You pay a royalty fee of 20% of the gross profits you derive from the use of Project Gutenberg™ works calculated using the method you already use to calculate your applicable taxes. The fee is owed to the owner of the Project Gutenberg™ trademark, but he has agreed to donate royalties under this paragraph to the Project Gutenberg Literary Archive Foundation. Royalty payments must be paid within 60 days following each date on which you prepare (or are legally required to prepare) your periodic tax returns. Royalty payments should be clearly marked as such and sent to the Project Gutenberg Literary Archive Foundation at the address specified in Section 4, “Information about donations to the Project Gutenberg Literary Archive Foundation.”
• You provide a full refund of any money paid by a user who notifies you in writing (or by e-mail) within 30 days of receipt that s/he does not agree to the terms of the full Project Gutenberg™ License. You must require such a user to return or destroy all copies of the works possessed in a physical medium and discontinue all use of and all access to other copies of Project Gutenberg™ works.
• You provide, in accordance with paragraph 1.F.3, a full refund of any money paid for a work or a replacement copy, if a defect in the electronic work is discovered and reported to you within 90 days of receipt of the work.
• You comply with all other terms of this agreement for free distribution of Project Gutenberg™ works.

1.E.9. If you wish to charge a fee or distribute a Project Gutenberg™ electronic work or group of works on different terms than are set forth in this agreement, you must obtain permission in writing from the Project Gutenberg Literary Archive Foundation, the manager of the Project Gutenberg™ trademark. Contact the Foundation as set forth in Section 3 below.

1.F.

1.F.1. Project Gutenberg volunteers and employees expend considerable effort to identify, do copyright research on, transcribe and proofread works not protected by U.S. copyright law in creating the Project Gutenberg™ collection. Despite these efforts, Project Gutenberg™ electronic works, and the medium on which they may be stored, may contain “Defects,” such as, but not limited to, incomplete, inaccurate or corrupt data, transcription errors, a copyright or other intellectual property infringement, a defective or damaged disk or other medium, a computer virus, or computer codes that damage or cannot be read by your equipment.

1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the “Right of Replacement or Refund” described in paragraph 1.F.3, the Project Gutenberg Literary Archive Foundation, the owner of the Project Gutenberg™ trademark, and any other party distributing a Project Gutenberg™ electronic work under this agreement, disclaim all liability to you for damages, costs and expenses, including legal fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE PROVIDED IN PARAGRAPH 1.F.3. YOU AGREE THAT THE FOUNDATION, THE TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH DAMAGE.

1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a defect in this electronic work within 90 days of receiving it, you can receive a refund of the money (if any) you paid for it by sending a written explanation to the person you received the work from. If you received the work on a physical medium, you must return the medium with your written explanation. The person or entity that provided you with the defective work may elect to provide a replacement copy in lieu of a refund. If you received the work electronically, the person or entity providing it to you may choose to give you a second opportunity to receive the work electronically in lieu of a refund. If the second copy is also defective, you may demand a refund in writing without further opportunities to fix the problem.

1.F.4. Except for the limited right of replacement or refund set forth in paragraph 1.F.3, this work is provided to you ‘AS-IS’, WITH NO OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PURPOSE.

1.F.5. Some states do not allow disclaimers of certain implied warranties or the exclusion or limitation of certain types of damages. If any disclaimer or limitation set forth in this agreement violates the law of the state applicable to this agreement, the agreement shall be interpreted to make the maximum disclaimer or limitation permitted by the applicable state law. The invalidity or unenforceability of any provision of this agreement shall not void the remaining provisions.

1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the trademark owner, any agent or employee of the Foundation, anyone providing copies of Project Gutenberg™ electronic works in accordance with this agreement, and any volunteers associated with the production, promotion and distribution of Project Gutenberg™ electronic works, harmless from all liability, costs and expenses, including legal fees, that arise directly or indirectly from any of the following which you do or cause to occur: (a) distribution of this or any Project Gutenberg™ work, (b) alteration, modification, or additions or deletions to any Project Gutenberg™ work, and (c) any Defect you cause.

Section 2. Information about the Mission of Project Gutenberg™

Project Gutenberg™ is synonymous with the free distribution of electronic works in formats readable by the widest variety of computers including obsolete, old, middle-aged and new computers. It exists because of the efforts of hundreds of volunteers and donations from people in all walks of life.

Volunteers and financial support to provide volunteers with the assistance they need are critical to reaching Project Gutenberg™’s goals and ensuring that the Project Gutenberg™ collection will remain freely available for generations to come. In 2001, the Project Gutenberg Literary Archive Foundation was created to provide a secure and permanent future for Project Gutenberg™ and future generations. To learn more about the Project Gutenberg Literary Archive Foundation and how your efforts and donations can help, see Sections 3 and 4 and the Foundation information page at www.gutenberg.org.

Section 3. Information about the Project Gutenberg Literary Archive Foundation

The Project Gutenberg Literary Archive Foundation is a non-profit 501(c)(3) educational corporation organized under the laws of the state of Mississippi and granted tax exempt status by the Internal Revenue Service. The Foundation’s EIN or federal tax identification number is 64-6221541. Contributions to the Project Gutenberg Literary Archive Foundation are tax deductible to the full extent permitted by U.S. federal laws and your state’s laws.

The Foundation’s business office is located at 809 North 1500 West, Salt Lake City, UT 84116, (801) 596-1887. Email contact links and up to date contact information can be found at the Foundation’s website and official page at www.gutenberg.org/contact

Section 4. Information about Donations to the Project Gutenberg Literary Archive Foundation

Project Gutenberg™ depends upon and cannot survive without widespread public support and donations to carry out its mission of increasing the number of public domain and licensed works that can be freely distributed in machine-readable form accessible by the widest array of equipment including outdated equipment. Many small donations ($1 to $5,000) are particularly important to maintaining tax exempt status with the IRS.

The Foundation is committed to complying with the laws regulating charities and charitable donations in all 50 states of the United States. Compliance requirements are not uniform and it takes a considerable effort, much paperwork and many fees to meet and keep up with these requirements. We do not solicit donations in locations where we have not received written confirmation of compliance. To SEND DONATIONS or determine the status of compliance for any particular state visit www.gutenberg.org/donate .

While we cannot and do not solicit contributions from states where we have not met the solicitation requirements, we know of no prohibition against accepting unsolicited donations from donors in such states who approach us with offers to donate.

International donations are gratefully accepted, but we cannot make any statements concerning tax treatment of donations received from outside the United States. U.S. laws alone swamp our small staff.

Please check the Project Gutenberg web pages for current donation methods and addresses. Donations are accepted in a number of other ways including checks, online payments and credit card donations. To donate, please visit: www.gutenberg.org/donate.

Section 5. General Information About Project Gutenberg™ electronic works

Professor Michael S. Hart was the originator of the Project Gutenberg™ concept of a library of electronic works that could be freely shared with anyone. For forty years, he produced and distributed Project Gutenberg™ eBooks with only a loose network of volunteer support.

Project Gutenberg™ eBooks are often created from several printed editions, all of which are confirmed as not protected by copyright in the U.S. unless a copyright notice is included. Thus, we do not necessarily keep eBooks in compliance with any particular paper edition.

Most people start at our website which has the main PG search facility: www.gutenberg.org .

This website includes information about Project Gutenberg™, including how to make donations to the Project Gutenberg Literary Archive Foundation, how to help produce our new eBooks, and how to subscribe to our email newsletter to hear about new eBooks.

BEDSPREADS	TABLECLOTHS	CHAIR SETS
BEDSPREADS	LUNCHEON SETS	RUNNERS, DOILIES
CLARK’S O.N.T. OR J. & P. COATS BEST SIX CORD MERCERIZED CROCHET
Sizes 10 to 30	Sizes 20 to 50	Sizes 10 to 50
J. & P. COATS KNIT-CRO-SHEEN
J. & P. COATS BEDSPREAD COTTON	CLARK’S BIG BALL MERCERIZED CROCHET, Sizes 20 to 50	CLARK’S O.N.T. PEARL COTTON
CLARK’S O.N.T. MERCERIZED BEDSPREAD COTTON		CLARK’S O.N.T. “BRILLIANT”
CLARK’S O.N.T. “BRITA-SHEEN”

The Project Gutenberg eBook of Old and new favorites

Old and New
FAVORITES

By popular
request...

FOOTNOTES:

SNOWDRIFT No. 7193

MAGNOLIA No. 6020

QUEEN ANNE’S LACE No. 7050

COLONY CLUB No. 7015

PINWHEEL No. 7064

HOSPITALITY No. 7067

GOLDEN WEDDING No. 672

WHEEL OF FORTUNE
No. 7288

COLONIAL CHAIR SET
No. 7168

CHAIR SEAT No. 7250

MODERN RUSTIC No. 7140

LUCKY STAR No. 7144

PINE CONE No. 6025

STAR WHEEL No. 744

BALLERINA No. 674

PINEAPPLE LUNCHEON SET No. 7335

ROYAL PINEAPPLE No. 7275-M

CHARIOT WHEEL No. 7035

FLOWER BASKET No. 720

PINWHEEL POPCORN No. 682

OCTAGON POPCORN
No. 213

IRISH CROCHET POPCORN
No. 60

MATCHING SET
No. 7165

SIX POINTED STAR
No. 210

General Information

THREAD INFORMATION

SIMPLE CROCHET STITCHES

ABBREVIATIONS FOR CROCHET

Here They Come!

THE FULL PROJECT GUTENBERG LICENSE

Chain	ch
Single Crochet	sc
Half Double Crochet	half dc
Double Crochet	dc
Treble	tr
Double Treble	d tr
Triple Treble	tr tr
Slip Stitch	sl st
Popcorn Stitch	pc st
Block	bl
Space	sp
Picot	p
Stitch	st
Round	rnd
Inclusive	incl.
Increase	inc.
Decrease	dec.

The Project Gutenberg eBook of Old and new favorites

Old and New FAVORITES

By popular request...

FOOTNOTES:

SNOWDRIFT No. 7193

MAGNOLIA No. 6020

QUEEN ANNE’S LACE No. 7050

COLONY CLUB No. 7015

PINWHEEL No. 7064

HOSPITALITY No. 7067

GOLDEN WEDDING No. 672

WHEEL OF FORTUNE No. 7288

COLONIAL CHAIR SET No. 7168

CHAIR SEAT No. 7250

MODERN RUSTIC No. 7140

LUCKY STAR No. 7144

PINE CONE No. 6025

STAR WHEEL No. 744

BALLERINA No. 674

PINEAPPLE LUNCHEON SET No. 7335

ROYAL PINEAPPLE No. 7275-M

CHARIOT WHEEL No. 7035

FLOWER BASKET No. 720

PINWHEEL POPCORN No. 682

OCTAGON POPCORN No. 213

IRISH CROCHET POPCORN No. 60

MATCHING SET No. 7165

SIX POINTED STAR No. 210

General Information

THREAD INFORMATION

SIMPLE CROCHET STITCHES

ABBREVIATIONS FOR CROCHET

Here They Come!

THE FULL PROJECT GUTENBERG LICENSE

Old and New
FAVORITES

By popular
request...

WHEEL OF FORTUNE
No. 7288

COLONIAL CHAIR SET
No. 7168

OCTAGON POPCORN
No. 213

IRISH CROCHET POPCORN
No. 60

MATCHING SET
No. 7165

SIX POINTED STAR
No. 210